similar to: [OT] Commercial conferencing solution?

Hi, I don't have a zaptel device for conferencing. I read from the lists, that ztdummy and zaprtc need to be installed to get conferencing. I could able to compile successfully with ztdummy and when i receive the call it says, -- Goto (13732,s,1) -- Executing MeetMe("SIP/-08118800", "1234") in new stack == Parsing

Does anyone know where to disable rtc support on redhat 9.0 using make menuconfig? I thought I disabled it but still got the following error when trying to make zaprtc: zaprtc.c:109: storage size of `rtc_irq_timer' isn't known zaprtc.c:719: storage size of `rtc_fops' isn't known zaprtc.c:107: warning: `DECLARE_WAIT_QUEUE_HEAD' declared `static' but never defined make: ***

I need a timing device for the DL360G2 for conferencing and meetme. For a timing device I have 2 X100P cards but neither will work in my DL360G2. The system will not even boot with either card in the system. Other PCI cards seems to work fine. I called Digium support and was told that there must be a conflict between the card and my Compaq DL360G2. I then moved on to ztdummy. I'm sure the

Hello all, I really appreciate the replies I've gotten about this so far (especially the support for wanting to run it on Solaris!). The core issue seems to have been missed, though -- is there any way to run a complete Asterisk solution on Solaris 10 (including music-on-hold and conferencing)? This probably comes down to a few issues: - Is ztdummy (a component of Zaptel) *really*

1st. - I'm from Poland, we don't have (yet, and hopefully forever) software patents. Is there any free g.729.1 implementation for asterisk? I want to use it for my private use (dialing into inet->PSTN gateway), and I don't want (now) to buy codec, as I don't know if I will be using this service in future (now I just want to test it). Any solutions? Maybe even

I feel there is some unclarity about the need for a timer in Asterisk. As Asterisk moves into production environments, this needs to be sorted out. I'm setting up an Asterisk in a production environment with no Digium cards at all. It is planned to be used as a clean SIP hosted PABX, where we connect to the PSTN via gateways with proper echo cancellation. There is no USB driver on the card.

Any help would be appreciated as I am a novice trying to work around a difficult situation. This is what the zaprtc helpfile says: zaprtc, getting zaptel timing out of your realtime clock ======================================================== Make sure that you _dont_ have rtc support compiled into your kernel! INSTALL: make USE: make load REMOVE: make unload I interpreted this as

I figured that asterisk can do conferencing if we have zap interface. The BRI cards I have they do not have Zaptel. How do I enable conferencing on my server? Regards Ajey

I have a system with no Digium hardware in it (two others with 2 X100P cards in each of them as well). I'm interested in using MeetMe in the one without the hardware (it works great in the ones with the hardware). I can't use ztdummy, because the system has usb-ohci drivers, rather than usb-uhci. I have read the little there is about zaprtc, and I am wondering whether there is a

The USB core was completely rewritten in 2.6, and as such the functions that ztdummy depends on do not exist in 2.6. I get the feeling that these changes are too much to easily fix ztdummy, so I don't expect to see it working on 2.6 any time soon (if ever) I made some small changes to zaprtc to work on 2.6 and I have MoH and Meetme functions working fine in my lab. For production I would

Hello , I am a newbie to * and have just been able to call a sip User Agent on a different machine thru *. I was trying to set up conferencing between 3 sip useragent on different macines at my worplace but was not able to figure out the procedure. I made the changes in meetme.conf and extension.conf as specified by someone in this mailing list, but * giving some error, " No ISA Tormeta

I'm running into a bit of a problem setting up conference calls. The box I rent at a colo doesn't seem to have USB hardware.... When I try to load usb-uhci I receive a "device does not exist" error. Which means I can't load ztdummy.... The system has a rtc clock module, so zaprtc won't work... (which I'm scared to unload rtc because I don't have physical access

Good day all I've installed asterisk with sip on my LAN,no special cards,if done sip.conf and extensions.conf and all work 100,I'm using x-lite as a client. I'm trying to do conferencing.What I did was to has out the meetme.conf looks like [rooms] conf => 9876 conf => 2345,9938 and extension.conf exten => 9876,1,MeetMe,9876 When I go onto x-lite and type 9876 it gives me

Hi All, kind of need help on the conference module, i'm using freepbx and enabled conferencing, i created a conference number, 6000. when i dial to it, my phone says it is connected but i'm hearing nothing, maybe logs below can help you. also, when i hang up the phone, the conference did not disconnect me. how can i end a conference? thank you -- Executing

Kristian, I have 2 X100P cards but neither work on my Compaq DL360 G2. The system will not even boot! Take a look at my initial post and let me know if you have any other advice. Regardless, thanks for your post! ------------------------------------------------------------------------ - I need a timing device for the DL360G2 for conferencing and meetme. For a timing device I have 2 X100P cards

Hi, I don't seem to be able to get music on hold to play normally. The sound gets often interrupted with a few seconds of silence then starts playing again. I'm using mpg123-0.59r and tried mp3 files with different sample rates with no luck. If that matters, endpoints are SIP ata186, SIP Cisco 7960 and H.323 (over chan_h323) Quintum Tenor. Sometimes it may play fine for a few minutes

Hi, Just need to check somthing.. Am I correct in saying that conferencing does not work on a system that does not have a Digium board installed?? Thanks.. -- ______________________________________________ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze

Hi all, I'm configuring meetme in asterisk but no luck. I dont have a digium card, so based on the wiki, i have to install the zaptel driver and enable the ztdummy on it. I compiled, install the module and enable it on the module.conf. When i tried to start the asterisk, asterisk wont start because of the error in loading the meetme module. Jun 16 15:36:56 WARNING[-1084989312]:

Anyone have any thoughts on why versions of asterisk I try (4 so far) after CVS-07/18/03 always end up locking up on me... which means no sip clients can register/re-register and if I type "reload" or "stop now" at the cli it just returns and does nothing. I have experienced this same issue on three separate boxes. Two running RedHat 9 and one running Redhat 8. I don't

I finally got 2.4 recompiled with RTC as a module: Module Size Used by Not tainted autofs 13684 0 (autoclean) (unused) acenic 241092 0 (unused) iptable_filter 2412 0 (autoclean) (unused) ip_tables 15864 1 [iptable_filter] e100 62340 1 rtc 9084 0 (autoclean) Here is my