similar to: ISDN newbie

I am running ntpd on the same machine as asterisk in order for the grandstream phones to display the time. After a while the time display fails until the phone is re-booted. Has anyone run into this problem before? Is it simply a bug in the GS firmware? Sean

ACES - Asterisk Communications Endpoint System {the following could be used by any IP-PBX but the name pays homage to Mark Spencer and friends who cannot be lauded enough for their fine work} As you read this it will be obvious I am not a professional engineer but I do have enough knowledge to be fairly certain what I'm proposing is feasible from not only an engineering, but production

say I needed to send a broadcast message that I wanted every user to hear when the pick up thier phone? can I "Play,message" on a line just before they get dialtone? or maybe after they dial before ring? how about a "ringdown" to a voicemail box and on end return them to thier line for the dialout? can * do ringdowns? when a user picks up an extension it automagically

> > I've never seen stats, but it's probably a safe assumption that the > > majority of IP phones are sitting next to a PC and the additional > > expense has been incurred because "people want a phone that looks and > > works like a phone". That's certainly been my experience far > > outweighing any technical issues with quality or reliability

Hello, I'm using AEC for a VoIP application on mobile handsets. I am doing experiments to learn how to work with it, and I have a problem: As long as I play through the device's normal speaker and record using the mic, I have absolutely no clock drift (according to echo_diagnostic.m). The echo is being cancelled and all is fine. Once I route to the earpiece (and still use the mic, which

I've been playing with the outgoing call spooling feature a bit lately and it all works as it should with the exception of one irritation. I'm mostly using SIP to talk to the phones and using G.723.1 I copy the call file into the spool/outgoing directory and the originating phone rings. I pick it up and the remote phone rings. However there is dead silence from the originating

Hi All, This one has me stumped, but I've done quite a bit of debugging to hopefully isolate it down enough. Basically, I hear an echo *delay* when I do a 'echo' test (key- there's an annoying delay). Here's what I have: Asterisk 1.0.3 current as of Dec 7. x100p (although, irrelevant in this case) (2) Cisco 7940's with 7.3 firmware All communications between asterisk and

Here is my system: POWER SUPPLY 450W ALLIED ATX450P4 R(41) MB NFORCE2 A7N8X DELUXE ASUS RTL(Standard) CPU AMD|2500/333 ATHLON XP BARTON R(Standard) DDRAM 256M|DDR333 PC-2700 -K %(Standard) HD 40GB|WD 7200RPM 8MB WD400JB%(70) VGA ASUS|V8170MAGICII/T 64M MX440SE(58) CD ROM 56X|AOPEN CD-956 RTL(22) Besides the above parts, i have 2 X100P FXO PCI cards, and 1 TDM40B I bought 2 phones from radio

Does anyone know if asterisk supports PLAR (Private Line Auto Ringdown). The Oreilly (Asterisk: Future of Telephony) book mentions it in passing saying that all you need to enable it is to set immediate=yes in zapata.conf. Has anyone implemented this in brokerage trading environments? Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Extreme N00b, I am getting the error message "a target does not exist" when running the make install inside the zap directory, probably pretty common, possibly a package I didn't install, just need some insight on it. The same occurs with the libpri and asterisk. -----Original Message----- From: asterisk-users-bounces@lists.digium.com

Does anyone know of a piece of hardware that can allow multiple earpices to be connected directly to a server running Asterisk. I hope I am not being to vague but basically I am looking to allow a call center to user the server to do all of the "Pickup" and "Hangup" functions. The operators will merely have to have th earpiece in their ear. I have seen serial pieces of

I have the MusicOnHold feature working great when called from ATA-186 extensions. It's pretty cool. However, when I call from a BudgeTone-100 phone, no music is heard -- instead it continues the ringing feedback and acts like the call is unanswered. At the same time, I can call from (multiple) ATA-186 extensions and hear music as long as I like. How can I debug this? As far as I can tell,

A thought occurred to me to on how to further quantify the impact of "glare" on a properly dimensioned trunk group and debunk the ground start glare concern. A cursory traffic analysis clarifies: 1. Assume you have a two-way trunk group, dimensioned for average busy hour, average busy season for P01 grade of service, Erlang B or Poison distribution. 2. Further assume that the

Does anyone in Asterisk land know how to turn on the message light on the back of the earpiece of a cisco 7960 when a message is waiting? Thanks! Paul Paul Mahler mail:pmahler@signate.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040130/0efacc79/attachment.htm

I have my new phone mostly working. I do have a couple of residuals that I cannot find mentioned in the list archives: 1. Is it possible to set the volume in these things? I hope I didn't miss it, but I've looked in the doc, the FAQ, and the asterisk archives and don't find anything. The displays in the pictures all have more bars on them than my phone does, and I need a bit

We have a strange echo problem. Maybe echo isn't the correct term. When we make a call f/ a SIP phone (we have several 7960's, some 3coms, and I've even tried a softphone, all on the same 100BaseTX network) to the pstn, if the person I'm calling has a PRI or channelized T1 f/ Bell, then the sound is perfect, couldn't be better. If I make a call to a person with a plain POTS

Before committing to about 50 of the spa942's, I like to take a last poll from those on the list to identify any negative issues that might be associated with the audio, functionality, early failures, etc, on the spa942. Expecting to deploy these using existing cat5 cabling and both rj45 jacks. Been using three of theme in a short term demo with the customer, but the demo systems has

While the rest of you were chatting about the smallest * server, I was sitting her staring at the telephone hanging on the wall. It is a Western Electric set in a varnished pine box with an earpiece you hold in your left hand and a mouthpiece attached to the box. You crank the magneto with your right hand to signal the switchboard. The two dry cells inside are dated 1935, and I'm

When talking to me, people are complaining the volume was not high enough. The phone only allows to change the volume of the speaker/earpiece. Is there an alternative solution? Is it possible to increase the volume in asterisk? Frederic

In a system connected to a verizon T1, Digium TE411P (quad T1 echo cancellation), client is complaining it is "too quiet". The complaint regards calls over the T1, not in house SIP only calls. Their description indicates they want some earpiece feedback of themselves speaking. Also, they complain that it takes several seconds (3-4) for the other party to respond. That is kind of