similar to: Windows Call Manager : Formerly [Asterisk-Dev] New Bounty

I'm writing a program to quickly generate SIP<Mac>.cnf files for tftp configuration of the 79XX series of Cisco phones and would ask that anyone who is interested in using this please send me working examples of your SIP<Mac/Default>.cnf, and RINGLIST.dat files. Also, please send me your ring tones and * related logos for possible inclusion. Thanks, Christian Hoffmeyer YottaDot

Thank you for all of the beta testing. New and improved graphics in this release along with drag and drop transfers and hold for all technologies. There's a screenshot on the link below. Also improved documentation so read the included README. There's also a sample xml configuration included. http://www.voip-info.org/tiki-index.php?page=Asterisk+WAMI Christian Hoffmeyer YottaDot

Here's my situation. I have two receptionists that answer incoming lines. Each has a 7960G with 5 incoming lines each. I'm trying to set this up so each line on each phone doesn't utilize call waiting. My problem seems to be that ChanisAvail(Sip/cisco1&Sip/cisco2&Sip/cisco3&Sip/cisco4&Sip/cisco5) always returns cisco1. Here are the sip.conf entries: (mind you,

I am trying to send calls from an AS5300 to Asterisk via e1 and I get this bit of information in place of routing information Going to extension s|1 because of Complete received Accepting call from '' to 's' on channel 1, span 1 Here are the relevant zaptel and zapata pieces. span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 signalling=pri_cpe switchtype=national

I have two grandstream budtetone-100 and cisco 7960g phones. When I talk via speaker phone on either of the phones I get a lot of echo. Any suggestions? Also how do I turn on the mark echo canceller. -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of asterisk-users-request@lists.digium.com Sent: Tuesday, April 13,

I am having a problem with Red Alarms on X100P cards. The most frustrating thing is I can not duplicate the alarms, therefore am not sure how to solve it. I have read after searching posts and the web that you can try different signaling methods which may help alleviate the problem. There is fxsks (Which I am currently using), fxsgs, and fxsls While reading the Digium site about these different

where can I get the 2.05 firmware all i see is the 2.04 firmwares :-) also anyone got a fix for the horrible speaker phone on the 200's

Hello, I'm running * on a very basic configuration. I have a Wildcard TE405P with the first T1 connected to a PRI line and the remaining three to Adtran TA750 channel banks with FXS modules. I successfully configured everything to work with a couple of Swissvoice IP10S handsets (MGCP) and analog extensions connected to the channel banks. The problem I'm having is that when I pick up any

I am trying to setup the call manager and I configured the manager.conf file. When I try to telnet 0.0.0.0 5038 It says trying 0.0.0.0 >>>>> > Connected to localhost > Escape character is '^]'. > Asterisk Call Manager/1.0 > Then I type > Action:Login (enter) > Username:sam > Secret:sam > Then I enter twice > > I get Response: error

Hello * community, I have 2 * boxes spanning a t1 with hdlc. I'm trying to route packets so people on a subnet seperate of the * boxes can browse the boxes on the * spanned subnet. The * boxes and the boxes on subnet controlled by * can see everything. The boxes on the seperate subnet inside the company can only see so far as the first * box and can't ping across the span.

All, I am trying to configure hdlc support on T100P Digium card - everything seems ok... but it just does not work at all. I was able to compile all drivers, the light on the card becomes green when I plug T1 link.... but I even can't ping default router IP... there is no data coming back to me, so I am confused completely now. Also I tried both protocols - raw hdlc and cisco hdlc. The

Hi I have just installed a lot of updates on a CentOS 4 box and w appears to have stopped working -- this machine has 3 or 4 people connected via ssh, yet this is all that is outputted: # w 20:46:32 up 301 days, 3:21, 0 users, load average: 0.02, 0.03, 0.04 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT "rpmverify procps" returns nothing so the package

Hi, I want to run more then one mongrel for the same rail application on the same machine, using the same rails files. This application use "active scaffold" when I start one mongrel some files are writes in the public/plugin_assets/ folder. If I start more then one mongrel it is possible these files become scrambles ?, there is also some files in tmp/{cache,pids,sessions ,sockets,

Hello all, My set up is a fractionated t1, with 1-6 voice channels, 21-24 data channels. I have a t100P installed in a amd 1500 with 512meg. Question: In order to set up the data channels, is the following correct? 1) compile new kernel with generic hdlc support 2) compile hdlc from hq.pm.waw.pl/hdlc 3) uncomment KFLAGS+=DConfig_ZAPATA_NET in zaptel makefile 4) compile zaptel, 5 compile rest

Is there someone on the list who has successfully installed one of the packages that integrates Asterisk with Outlook? I've tried but been unsuccesful thus far. I'm looking for guidance on which works well. I'm using Outlook 2003 on WinXP. Thanks, Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist

I'm not sure if this is possible, but I was hoping to find an address book that runs on Windows XP that will allow me to select a phone number and send that to my Asterisk. The Asterisk system would make the call and connect the call to a SIP phone (Grandstream Budge Tone-100). Is there anything out there that can do that? Thanks, Dave -------------- next part -------------- An HTML

This is more on the line of "Open Source Jobs." Official description below and at <http://www.xythos.com/home/xythos/ about/jobs_senior_tech_support_engineer.html>. You can contact me at dking@xythos.com if you're curious about the company, or our actual recruiter at recruit@xythos.com. Xythos sells a document management system (a J2EE system), and is looking for a

Hi, QUESTION: Does anyone have sample code that shows how to do an (a) chunked HTTP file download, and then (b) stream this into the HTTP uploading of this to another web application with a file upload controller? BACKGROUND * I''ve been trying to "stream" an existing webpage to a separate web application, using normal http request response approach. * The issue I''m

Hi, I am writing a puppet manifest to install a service pack on windows, what I observe is that in case the exe file is withing 50 - 70 Mb the transfer to windows happens without any issues. But the current service pack "windows6.1-KB976932-X64.exe" is around 900 Mb. My manifest is as follows file { ''c:/temp/windows6.1-KB976932-X64.exe'': ensure =>

Hi I am trying to save some plots in a postscript file. When I generate the plots in the main window, they appear correctly - their orientation is landscape (i.e., horizontal). However, when I open the .ps file with GSview, the whole page appears vertically, and the plot appears horizontally, which means that the plot is only partially visible (example here