similar to: Asterisk on FreeBSD 4.9

Hi all I'm trying to set up Asterisk on FreeBSD 4.9 to route calls to H.323 GK. I have installed asterisk using the ports. It seems to be running OK, but when i try to dial through h323, it segfaults I'm using X-Lite as SIP client, i have set up my h323.conf [general port = 1721 bindaddr = 0.0.0.0 tos = lowdelaydtmfmode = rfc2833 context = Out noFastStart = yes noH245Tunneling = no

Hello, I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. My network connection diagram: ---------------------------------------------- X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN boldsoft*CLI> show version Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux I can make

Hi, Someone released a succefull interconnection in H323 with WTL equipement ? I'm trying to do that with an IPNx. But get dead air. With chan_oh323 it's fine, all works. With chan_h323 => dead air. The configuration is GW to GW. This is my configuration from h323.conf: [general] port=1720 bindaddr=my.ipaddr dtmfmode=rfc2833

Hi list, why I cannot hear voice when I call from a SIP telephone (Budgetone and others) to a H323 telephone (several models)? could anybody please give any idea to solve this issue? Please, let me know. Thanks in Advance. N.B. The configuration for "extensions.conf", "sip.conf" and "h323.conf" files are: ***************************************

Greetings- As most of you who monitor this list know, I've been messing about with Asterisk -HEAD, Cisco Callmanager, and the nufone H323 channel driver here for some time- with pretty decent success. I'm hoping to cash in a chip here- I've run into something that is probably a very simple answer, yet not found a decent reference to resolve it. Scenario- -HEAD as of last week

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

Hello, I'm trying to setup an asterisk extension to be attached to an H.323 gatekeeper so that an asterisk application (Astcc) answers H.323 calls from any terminal logged into the gatekeeper. I'm using asterisk's channels/h323 implementation, and I've configured the following in h323.conf: [general] port = 1720 bindaddr = AAA.BBB.CCC.DDD allow=all gatekeeper=XXX.YYY.ZZZ.AAA

Hello, Thank you for the job well-done. I installed the chan_h323 of the asterisk-1.2.7.1 and with lib pwlib-v1_10_0-src-tar.gz and openh323-v1_18_0-src-tar.gz and I used licensed g729 from digium. However, I am having a very funny behavour. 1. If I send a call on its ringing at the called side but the caller didn't get the ringing tone. 2. if the called picks up the phone, I am

Hello every one, I have got a H323 gatekeeper for testing. The informations are something like this: account code: test01 gk ip address:192.168.10.12 I don't know how to set it in the h323.conf or oh323.conf, I have tried it for almost one day but I always got the error. Help me please. Regards. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Greetings, I have a problem making a call from Asterisk to Cisco H323 PSTN gateway using H323 channel. I can call but there are no sound in both way. If I call H323 gateway directly from SJPhone I have no problem with sound. Any advice are welcome. Thanks in advance.

This week starts with the exciting news: We're getting close to Asterisk 1.0 again. After the failed attempt earlier this year, we've been able to remove a lot of the MAJOR/CRASH bugs from the bug tracker and Mark feel's it's time to target 1.0 again. At this point, the community needs to work as a community, spending extra time on finding bugs, solving issues, improving

Hello everybody, when I upgraded from RC1 to RC2 I didn't had any audio between my ATA286 and H323 EP (my post from 13/08/04) I checked further and discover that problem is with ATA286 who is unable to call. I always get an 404 error. Coming back to RC1 everything works fine again. I tried to modify my dtmfmode from rfc2833 to info but in change nothing. Local call to asterisk are

Hello! Could someone, please, explain to me the meaning of Subnet directive in configuration file of host, because I really don't understand this. http://www.tinc-vpn.org/documentation/tinc_4.html#Configuration "The subnet which this tinc daemon will serve."??? I assign an IP from apropriate subnet to interface, what does it mean "will serve"? I've read

Hi folks, this does look like a bug to me: Asterisk replaces the @63.214.186.6 by @context which obviously leads to a failure. Any comments, do I have a configuration issue on my side that I missed? Cheers, Philipp -- Executing Dial("SIP/philipp-bd5f", "SIP/992365264680@nikotel- out|90") in new stack -- Called 99xxxxxxxxxx@nikotel-out -- Got SIP response 302

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there, i have a working Microsoft ISA firewall with buildin H.323 Gatekeeper.... So Far, i got registerd the asterisk on the M$ Gatekeeper... here is the h.323 configuration: ; Open H.323 driver configuration ; [general] port = 1720 bindaddr = 0.0.0.0 allow=all ; turns on all installed codecs dtmfmode=rfc2833 gatekeeper =

Hi list, After several tries to understand the subtil description in the h323.conf to be able to make the next scenario I was presented the following error messages by asterisk. Can somebody tell me please what I am doing wrong. Scenario: Gatekeeper (h323) --> Asterisk PBX -->(h323) Gateway Endpoints are connected to Gatekeeper. Call does come in like 999931235650087 with codec g711

Hello group, I am trying to register to a opengk h323 gatekeeper using chan_h323. The gatekeeper expects me to register a username like 31201234567@gatekeper.com with a password secret and an e164 of 31201234567. Thus I put the following in the config file: [general] gatekeeper=w.x.y.z. AllowGKRouted=yes [31201234567@gatekeer.com.com] type=h323 e164=31201234567 secret=geheim

Hi guys, I create a topology like fellow: /****** /************ /*********** * GK *-----------* Asterisk *---------- Sip Prov * ******/ ************/ ***********/ | | | | | | H.323

Hello, I'm trying to register with a gatekeeper using chan_h323, I have a Login, Password and a user (telephone) number, This is my h323.conf [general] port=1720 bindaddr=x.x.x.x (my fixed IP) gatekeeper=x.x.x.x (gk ip) allowgkrouted=yes allow=all [xx] (my login) type=h323 e164=111 (my assigned phone number) secret=1111 (my password) context=incoming I'm getting this error when trying

What is the difference between H323 and OH323 in Asterisk? I need Asterisk to have basic H.323 support so we can offer some simple H323 termination for some of our Cisco and Quintim hardware. Our upstream provider uses SIP, so I figured I'd use Asterisk as the go-between. I already setup Asterisk so it can push calls out through our providers via SIP. I just need a good/solid/very simple H323