Hi list,
After several tries to understand the subtil description in the
h323.conf to be able to make the next scenario I was presented the
following error messages by asterisk. Can somebody tell me please what I
am doing wrong.
Scenario: Gatekeeper (h323) --> Asterisk PBX -->(h323) Gateway
Endpoints are connected to Gatekeeper. Call does come in like
999931235650087 with codec g711 and need go out to gateway at address
217.199.177.152 to terminate the traffic to PSTN. in exactly the same
format. (9999 is just used as a prefix)
In my understanding I need to make a h323.conf that looks like this to
be able to achieve this.
; The NuFone Network's
; Open H.323 driver configuration
;
[general]
port = 1720
bindaddr = 0.0.0.0
amaflags = default
disallow=all
allow=all ; turns on all installed codecs
allow=g711
dtmfmode=rfc2833
gatekeeper = 200.84.48.85
AllowGKRouted = yes
context=gateway
[gw1]
exten =>9999XXXXXXXXXXX,1,Dial(h323/${Exten:1}@217.199.177.152)
[gw1]
type=h323
prefix=9999
context=gateway
So when I start asterisk with -vvvvvvgc the last part of the information
looks like this
[chan_h323.so] => (The NuFone Network's Open H.323 Channel Driver)
== Parsing '/etc/asterisk/h323.conf': Found
== Creating H.323 Endpoint
== Setting default context to gateway
WARNING[1074494336]: File chan_h323.c, Line 215 (build_alias): Keyword
h323 does not make sense in type=h323
== Adding alias "gw1" to endpoint
== Adding Prefix "9999" to endpoint
== Registered channel type 'H323' (The NuFone Network's Open H.323
Channel Driver)
== H.323 listener started
== Using PARENTGK@dC8543051.dslam-03-16-4-02-01-01.urb.dsl.cantv.net
as our Gatekeeper.
== Parsing '/etc/asterisk/enum.conf': Found
Asterisk Ready.
So I checked the list and found some patch to update chan_h323_c to
version 1.11 for the error message but I do have the most recent CVS
update that tells me the version is already on * Version Info: $Id:
chan_h323.c,v 1.12 2003/12/10 23:34:47 jeremy Exp $
This is as far as I get. Is there anybody that can give me some hint
where I am going wrong? Probably some interpretation error at my site
in how to configure an alias when the type=h323. I also have the h.323
debug trace but this is just presenting an immediate relase complete
because it does not know how to handle the traffic due to my not so
ingenious config file...
Box is on RH9 with 1.12.2 and 1.5.2. openh323 and pwlib. asterisk is
taken december 14th from CVS.
Tjapko.
