similar to: More Success on the Cisco 7920 and SCCP !!!!!

hi! i had some good news regarding the cisco 7920 and the internetworking with asterisk (and possibly SIP ?). Status: chan_sccp.so not coredumping anymore :-) Phone contantly in reboot loop [see below] :-( Reboot Loop means: ------------------ Phone auth's with AP Phone gets IP from DHCP & TFTP Server Phone loads OS7920.TXT Phone loads SEP<macaddr>.CNF.XML Phone loads

Hi all, we are happy to announce the new test-release of chan_sccp. The Cisco 7920 support is working now, however, some call handling stuff is hardcoded for testing. Also some more in-deep-knowledge of Skinny was archieved, how they handle calls. Please test it with your 7940/7960 and 30VIP and report any problems using our bug tracking tool. The latest tarball is available at:

Hi list! I'm trying to configure the Kirk IP 600 wireless (DECT) system. The wireless phones are regular DECT phones, the Kirk IP 600 is doing the voip part by registering/gatewaying the phones to a callmanager server. The phones do not work and I think the problem is that they do not register at asterisk but I'm not sure because I don't understand a thing of the sccp/skinny

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

Dear Skinny/SCCP lovers :-) I've just completed & uploaded to the cvs the newest version with fixed redial key AND implementation of speed dials. please test extensively and report any bugs. i know that the display is not yet set correctly but the buttons are working as expected. Enjoy testing... --jan (*1) http://chan-sscp.sf.net (*2) yes, bugtracker is down at the moment, will fix

Hi again, I found chan_skinny and that seems to work pretty good. the SCCP one filled out all the buttons really nice, but skinny seems to be working. How do I fill out the second line button on the phone with skinny.conf? Thanks much! ...Jeff

Hi, the last 2 days i was working on getting the 7920 Phones to work with Skinny & Asterisk; however no luck (yet). Does anybody has a SEPDefault.CNF.xml and a SEP<mac>.CNF.xml handy for me ? it should be documented at the cisco page, but it isn't :-( I still have the issue that the 7920 spits out "No Service - IP Config failed" but Asterisk is giving me sign that the

Greetings, I have seen a few postings in the past regarding the interop of Asterisk and the Cisco 7920 WiFi phone. To date, I have not seen a definitive method to getting the phone working. Assuming someone has this actually working, can that person step up and answer these questions. 1) What Channel is it working with (chan_skinny or chan_sccp)? 2) If code was used that is not a part of a

Hi, I?ve been following some information about the latest chan_sccp drivers for a few weeks. I installed and tried about any variant of driver that exists in the chan_sccp system. Despite a few little changes in the CLI options I am still encountering a lot of problems with the phone. When not using the phone for a while, it "disconnects" from asterisk (1.0.7) after a few hours

I have asterisk 1.09 running with chan_sccp.20050701 on Fedora core 4 with kernel 2.6.12. I have a Cisco 7940 working with X-lite working on XP too, connecting to each other, Asterisk and FWD. The 7940 upgraded to SIP7.4 with xmlDefault.cnf.XML getting delivered via tftp using the loadInformation8 parameter method taken from voip-info.org ("Configuring Cisco 79xx phones with Asterisk"

Greetings: I have a working configuration for SCCP on our LANS which doesn't route RTP correctly to a skinny phone behind NAT registering from a remote public IP. Configuration: asterisk 1.4.35 servicing only skinny phones trunked to asterisk 1.2.40 which services chan_phone FXS, zap FXO and SIP phones; both instances of asterisk are behind NAT and run on the same host (using different base

Hello, I found serveral discussions about the Zyxel ePhone Prestige P2000W and the WiSip from Pulver Innovations on this mailings list but still have some questions: 1) are there other affordable wireless SIP Phones on the market? I haven't seen or found anything else till now ... 2) is p2000w and wisip the same hardware?? so could I use firmware from both companies regardless of what

I?ve read various stories about the Asterisk SCCP implementation. Some say it works fine, others say it doesn?t ? stick with a SIP phone! My dilemma is that I?d like a WI-FI phone with multi-line capability, and so far Ciscos 7920 is the only one I?ve found. The disadvantage is that it cannot be upgraded to support the SIP-protocol, so if I purchase such a phone I am stuck with the SCCP.

The chan_sccp page at http://www.voip-info.org/tiki-index.php?page=chan_sccp2 has been updated. See the bottom of the page. Thanks. Comments welcome. -- respectfully, Joseph =============== ---------------------= ********** =

Hi, I have a Cisco 7920 that I'm trying to get working with my * box. When the phone boots it requests XMLDefault.cnf.xml and SEP<MACADDRESSHERE>.cnf. I assume I set the line number, etc in the latter of the two. However I cannot find any reference to how this file is structured. Anyone know? I assume this is why I'm getting the errors below: Oct 17 19:47:24

Hi, please tell me, is original skinny support in Asterisk stil under development or is better to try chan_sccp from http://chan-sccp.sourceforge.net ? my first try was unsuccessfull (chan_sccp compile OK, but module loading fail during Asterisk startup) and my phone (C7940) seems to be not supported in original chan_skinny :( PJ

Any one knows where to install chan_sccp for asterisk 1.4 ???????. Please guide me from where can I download the asterisk 1.4 sccp channel driver and how to install it because I tried to get chan_sccp-mayday05.tar.gz When I trying to install it ,error happened like this. Please help me how to solve this issue. [root@XPL t]# cd chan_sccp [root@XPL chan_sccp]# make clean rm -rf

When I try to compile the new chan-sccp-easter2005 with asterisk 1.0.6 I get the following error on make: Now compiling .... chan_sccp.c 744 lines chan_sccp.c:67: conflicting types for `sccp_request' chan_sccp.h:1723: previous declaration of `sccp_request' sccp_pbx.h:5: storage size of `sccp_tech' isn't known make: *** [.tmp/chan_sccp.o] Error 1 I tried looking in

Hi list! I'm using phones that emulate a Cisco 7940 with chan_sccp. When I was using Asterisk 1.0.5 (bristuffed) I never had any such message on the console. The phones do work. Is this a bug in chan_sccp or a feature of asterisk 1.0.6? Thx!

Hi, I tried to connect cisco 7910 into asterisk system using chan_sccp.so. But I got a major issue : - when I called from 7910 to another sip phone in the same asterisk server, the call took place normally. - when I called from 7910 to another sip phone in different asterisk server, the call is answered but I cannot hear nor say anything. The phone just immediately lose its tone. - when I got