similar to: Need 3.3v 64 PCI Booard with 800FSB (for ordinary Pentium4, not Xeon)

Is anyone using a net4801 and an analog only setup? I am looking for a modem that is PCI 3.3V, apparently the X100P is 5.0V PCI only so it won't work with the net4801.

Hi folks, Suppose I create the character vector charvec by > charvec<-c("a1.b1","a2.b2") > charvec [1] "a1.b1" "a2.b2" and then I use strsplit on charvec as follows: > splitlist<-strsplit(charvec,split=".",fixed=TRUE) > splitlist [[1]] [1] "a1" "b1" [[2]] [1] "a2" "b2" I was wondering

Greetings: Another test. I've re-encoded a batch of mono 22050 Hz WAVs, average bitrate seems to hang around 30-40 kbps. Icecast.xml is set for three connects, and the URL is here: http://64.108.112.145:8000/shouter.ogg IMO, the sound quality is much better now. Again, the stream should be up for about 45 minutes or so. Please let me know how it works for you... Best regards,

Greetings: Another test. I've re-encoded a batch of mono 22050 Hz WAVs, average bitrate seems to hang around 30-40 kbps. Icecast.xml is set for three connects, and the URL is here: http://64.108.112.145:8000/shouter.ogg IMO, the sound quality is much better now. Again, the stream should be up for about 45 minutes or so. Please let me know how it works for you... Best regards,

Has anyone been able to change the way that asterisk performs transfers? Instead of using the # key, I would like to due something else, such as flash. # is just causing too many problems with transfers and menus when calling out.

What is the best free stun server out there? The one that I have looked at from vovida requires two NICs. Is this neccessary?

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hello! does anyone have patch for liveice that the saved files (SAVE_FILE directive in the config file) don't get overwritten if liveice is stopped and started? i think about something like adding the current date and time to the filename... or ist there some other solution concerning dump (or save) files? if there is no patch around, i

Can someone tell me where I can get just app.c from. Mine somehow got corrupted, and no updates or anything else will fix it. I just need the one file from the latest cvs. 8-1-04. Please help

Is anyone else having problems with Sipuras not being able to re-register to Asterisk after applying the cvs update last night? Just curious if I need to roll back or take all of my Sipuras out back and beat them.

greetings, is it a proper way and/or good idea to perform a yum update in the background like this? yum -y update & at this moment, i do not have as reliable of an "wireless access connection" to the remote server machine at the data center as i would like and i want to take this one box from 4.1 to latest 4.2 comments please? thanks! - rh -- Robert Hanson - Abba

Hello all I am running CentOS 5 on a small server and I am having very strange memory malfunctions. The computer runs perfectly with no problems whatsoever. From time to time, after a soft reboot, the computer emmits beeps corresponding to a memory fault. It never reboots again until I find and remove a now defective DIMM. That DIMM can never be used again because it is out of order. This just

I'm trying to find the right Digium card for the Dell 2950 Dell 2850 HP DL380 G3 HP DL360 G3 Are these 3.3v or 5.0v machines ? I am out of the office, and need to buy a card today. I am looking at either the TE407 or TE412, and would appreciate any help. :) Julian

Is features.conf included in the cvs as of 8-1-04? I have updated, but am not seeing it?

Does anyone know if there are any plans for Zapata or anyone else for that matter to come out with a 3.3v PCI version or PCI-X version of those cards? Gene

Hi All; We would like to build a call center having 2 E1, but we would like to know which card to select: Sangoma or Digium? And card type to be PCI express or PCI 5.0V or PCI 3.3V ? Any advise or special recommendations for the call center? Regards Bilal

On Thu, 13 Sep 2001, Jack Moffitt wrote: > > ================================================================== > > hey josh, > > i talked to [faculty advisor] today and was told we must stop our online > > streaming. reasons for this rash decision involve around a new law that > > was put in place over the summer saying that stations who broadcast online > >

I'm building some new servers next week, and I'm wondering if I should wait for the 4.3 ServerCD or just use the 4.2 ServerCD. Is there an ETA on 4.3? Thanks for the great work, Michael Grinnell

Hi- I have posted a photo of the TE410P Digium card on my site, so that those wishing to purchase a compatible motherboard can see physically what the PCI slot requirement is: http://www.evtmedia.com/TE410P.htm I believe the required slot is a 64-bit, 3.3 Volt PCI, most commonly found on Xeon-based motherboards. A 64-bit slot is longer than the TE410P board requires, but the PCI connector

I have been fiddling with the darn thing for three days now, and i am at whits end. I dunno why it isn't working. Any help is so much appreciated. I am trying to use mpg123, liveice and icecast on my Alpha. It does not have a sound card. All three programs compile without any problems. If i did not know better, i just might a throw the alpha off the space station and watch it burn up on

Any help with this will be greatly appreciated. When re-compiling * to include voicemail access from a MySQL database, I recieve the follwing error. Anybody know how I can fix this? Am I missing packages somewhere? app_voicemail.c:44:25: mysql/mysql.h: No such file or directory In file included from app_voicemail.c:247: mysql-vm-routines.h:7: parse error before '*' token