similar to: problems dialing area code

Hi guys, sorry to be iterating this on the list once more, but I'm not able to get this stuff to work as I'd expect. So far, I've always managed to keep it out of NAT environments :-> My home LAN is NATed by a simple Draytek router. In the home LAN is an ATA186 with SIP. On the internet (public) is an Asterisk server. I have nat=yes in the sip.conf and the connectmode is set

I've configured Asterisk 0.7.2 to work together with Cisco ATA186 (SIP,G.711. RFC2833) and OpenPhone (H.323, G.711). But there is an issue while calling from ATA186 to OpenPhone via Astrisk - when I press any key on analogue phone connected to ATA, Asterisk shows following message: -- Executing Dial("SIP/519-3781", "OH323/62.213.36.100|20|Tt") in new stack --

Hello All, We are running Asterisk on a linux server as a SIP proxy with Cisco ATA 186's at the subscriber end. For long distance we have iax2 connectivity with a ip carrier. For local calls we are routing out through a commercial VEGA voicestream pots unit to an adtran channel bank and then from there to our class 5 soft switch. The sip to sip calls and the long distance calls work great.

When I set up my Asterisk box at home I didn't want to have to dial 9 to dial off premises, so I gave all my local phones three digit extensions with this format: 1[1,0]*. My thought is that there are no area codes that start with 0 or 1, so if I use those numbers, I can create 20 local extensions that can be dialed with 3 digits, and not have to use a timeout when dialing long distance. If

I've installed Asterisk and configured an ATA-186 as described at this link: http://www.djernes.org/~shawn/ata186.htm Unfortunately this guide abruptly ends before it explains how to deal with the sip.conf and extensions.conf files. So I left extensions.conf alone and my sip.conf looks like this: [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0

Hi, I wish to connect several ATA186 Phones to each other, to iconnecthere and to the PSTN using asterisk. Please tell the appropriate settings for firewall (ports to open etc.) sip.conf and extensions.conf(part relevant to iconnect). Also I would be glad to get a working example of your ATA186 configuration. I tried searching the mailing lists and several sites but did not find an answer.

Hey all! I'm having problems trying to set up an ATA 186 with my Asterisk box. When I get the phone to place the call, I type the extension and I only get busy signal after 5 seconds. So I can't call my Asterisk box from my ATA and either call from my Asterisk to my ATA. Does anybody know what can be happing? Log is attached.. tks regards Oz -------------- next part -------------- >

Hi, I'm away at a conference in Amsterdam. My home is in Cambridge in the UK. On a whim, I tossed an ATA186 and a phone into my bags before leaving home. I was able to plug my ATA186 into a LAN here at the conference and was connected to my home Asterisk in a few seconds. Total time from unzipping my bag to talking to home no more than 15 seconds. OK, so the kit could be more portable,

I thought I'd post my experiences for the benefit of anyone else who may be at the point I was when I first started with asterisk. I have 2 incoming analog lines (north eastern U.S., Verizon) where one is set to ring if the first is busy. I bought a bare-bones system from abs-pc with the following components: POWER SUPPLY 450W ALLIED ATX450P4 R(41) MB NFORCE2 A7N8X DELUXE ASUS RTL(Standard)

Hi buddies, I encountered DTMF issue when I tried to place call from x-lite to a sip conference serice,here is the diagram. X-lite---->Asterisk--->Cisco SIP proxy---->SIP Conference service The Call can be established,and I can hear from x-lite the prompt of the conference,but when I input any digits,nothing happened,the conference service did not recognize my input.At the same time,in

Hello Everyone - Well, I think I'm getting closer with the asterisk connection. This is my setup and I keep getting this error below in ,my /var/log/asterisk/messages file. I have opened 5060 port on the firewall box. I would this is Warning which I can ignore! But I see the connetcion coming but NO DIAL TONE on mt ata186 box sitting in my 192.168.200.x site! I'm using ATA186(cisco

I dont have a cisco acount yet can some bady hel me with the ata18x-v2-16-030401a-1.zip file. thanks in advance Rodney Acosta Coya. Dpto. Tecnologia de la Informacion. racosta@moanickel.com.cu Tel:(53)(24) 62 611 -----Mensaje original----- De: Paul Rodan [mailto:asterisk@glitch.cc] Enviado el: Martes, 23 de Noviembre de 2004 11:24 a.m. Para: 'Asterisk Users Mailing List - Non-Commercial

Hi! I've got a number of extensions (about 50) on a working Asterisk setup. For each user, I have two extensions configured (for example 11021 for a Cisco 79XX phone and 11022 for X-Lite), and a ring group that ties the two extensions together (for example, 1102). Reason being that if the user is away from his/her desk or working offsite, they can answer the soft phone on the PC. From

Hi, I saw your posting about the cisco ata186 I2 vs I1 and the simple vs complex impedance. I ordered a cisco ata186 i2 for use in Canada by mistake, didn't know that I needed the I1 version. Will the I2 version work in Canada with regular anlog phones, or will I need to change it. Thanks for your answer. Samy -------------- next part -------------- An HTML attachment was scrubbed... URL:

The ATA186I1 is way past end of life, it was the first version of the ATA186, but it's still working with only a couple adjustments to a factory default configuration. Unlike the brand spanking new Cisco/Linksys SPA2102. Which has a number outstanding issues with Cisco/Linksys tech support. It's taking a lot longer than I was expecting to get the new? box working.? And I may continue

Hi All, I'm looking at getting some Cisco VoIP hardware to play with in combination with a Asterisk server. I've heard that there is beta software available to do SIP on the 7905G. So, I'm thinking of either getting a 7905G or a ATA186. My dillema is, which one to buy? I can get both for about the same price, has anyone had any experience with using a 7905G with Asterisk? On

Hey all, I'm pretty new to Asterisk and VoIP in general, so I'm hoping I can get a bit of help here. First I'll explain my setup, and then my problem. Right now I have a Cisco 3640 with a VIC2FXO card in it which has 2 FXO ports. I have an analog phone line plugged into the first port (voice-port 1/0/0). I've got it setup so that calls coming into that analog line are

Hi all, A Cisco ATA186 configured with g711ulaw, NAT=yes and canreinvite=yes, made calls through Asterisk to a Cisco 5300 gateway out to a PSTN line with errors as follows: -- Executing Dial("SIP/ata186-c1cf", "SIP/29086988@110.100.231.2:5060|30|r") in new stack -- Called 29086988@110.100.231.2:5060 Apr 15 16:11:22 WARNING[1116941120]: chan_sip.c:2049 process_sdp:

Hi all, I have a Cisco ATA186 connected to an Asterisk Server (SIP) The dialplan uses 1XX for local extensions and XXXXXXX for external numbers, where the first digit is always different than 1. In this moment, when I dial 123 for example, ATA waits till timeout before dialing that number. The same for the longer one. How can I do to make it dial imediately when 3 digits starting with 1 are

Is there anyway to turn off the call waiting beep in the grandstream and/or cisco ata186? I have a dial statement in my extensions.conf that rings 5 phones at the same time by combining them with the & in the dial statement. i.e.) exten => blah,blah,Dial(SIP/GS1&SIP/GS2&SIP/GS3&SIP/ata186a&SIP/ata186b,25,t) If one of those lines is being used, then the user gets a really