similar to: Multi-line help

I have 2 sip phones and an analog phone attached to a Digium USB fxs device. I would like the analog phone to ring when transfers are made to it, but I don't want it to ring when a call comes in from outside, although I would like the person at that phone to be able to pick up the phone and answer the incoming call. Is that possible? Thanks Sean Garland, MCP+I, A+ Siskiyou Technology

I am trying to get asterisk to email me my voicemail as attachments. What am I missing? Where do I tell it to go for SMTP services? Voicemail.conf: ; ; Voicemail Configuration ; [general] format=wav49|gsm|wav serveremail=pbx.agtcorp.local attach=yes maxmessage=180 skipms=3000 maxsilence=10 silencethreshold=128 maxlogins=3 append=yes [default] 100 => 1234,Sean Garland,sean@siskiyoutech.com

It appears that my replies aren't getting to the list. Just testing to see what is going on... Sean -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040105/cc18a485/attachment.htm

I have a very annoying problem that we hear on our end, but the other party doesn't hear. There are random beeps and echo type noises that occur. They are present during voicemails, and present on my end during calls. Is anyone experiencing the same deal? I have asked this a number of ways on the list, and never get a response... Thank you. Sean Garland Mount Shasta, CA

I have the standard parking.conf but extension 700 doesn't show up in my dialplan.... Why? I can dial 701 which tells me that I don't have any calls parked there. 700 just gives me invalid extension noise.... Should I have extension 700 defined elsewhere? Thanks parking.conf [general] parkext =a 700 ; What ext. to dial to park parkpos => 701-705

Is there a way to append a 91 in front of all incoming caller id numbers? What I am interested in is this - when a call comes in and the caller ID comes across, it is in the format 9165551212. That would be fine, but if I want to call them right back, and I choose that call and 'dial' on my phone, it fails because it hasn't dialed a 9 first. I assume also that if there was a 9, it

I've downloaded the entire archive of articles and searched through them for an answer on this, but I haven't come across one yet. I'm looking to replace a small phone system in my church with Asterisk, and I'm stuck looking for phones. I know that the staff are going to want a button for their commonly-called extensions, but I'm having trouble finding phones that have, say, 10

Announcing a new Windows-based IAX/IAX2 client. Please download it and give it a try. Let me know about any bugs, and any missing features. I have yet to come up with a catchy name for it, so at this point it calls itself IAX Phone. (Suggestions? Non-derogatory suggestions, preferably). Download: http://www.sokol-associates.com/Downloads/IaxPhone.zip Reference & Support Page:

Hi, I want to pick up a call with the snom's programmable buttons(snom190 -SIP 3.60x, snom360-SIP 4.1) with asterisk server (v 1.2.0), I tried with the option 'Destination' and when the incoming call arrive to another snom phone the button blinking. In this way I can only pick down it pressing the blinking button. The solution is call the *8 or parcking the call but my pbroblem

I would like to use one of my Snom 200's 5 programmable keys to park calls. I am using image SIP 2.04g. I have tried a variety of combinations and have come to the conclusion that: 1) On the Key Mappings administration page, I must select the "Transfer" under the "Break Keys" option box to be able to successfully transfer calls using the "Transfer" button. 2)

Ok so I added to my Freepbx config running Asterisk 1.2.4 in extensions_custom.conf ; intercom exten => _7XXX,1,SIPAddHeader(Alert-Info: Auto Answer) exten => _7XXX,2,Dial(SIP/${EXTEN:1},12,Tt) and configured my Polycoms via this page http://www.voip-info.org/wiki/view/Polycom+auto-answer+config for auto answer and that works fine if I dial 7 then the 3 digit extension. No

Has anyone found a good wayt o do a gate intercom using Asterisk? I am looking at a Xorcom PBX with programmable contact, so I have no issue with opening the gate, but the interface at the gate is a bit tricky. I thought about a weather proof housing containing a phone but it seems a bit tacky. I also looked at a handsfree erather proof phone, but at $600 it is a bit steep. Any solutions that

Everyone-- Here's a cost analysis, rather crude and inspecific, of using Asterisk to implement a phone system. I'm really quite naive and new to all this, so I'd appreciate any corrections, tips, pointers, etc, from those in the community, who have far greater experience, knowledge, skill, etc. than I. Am I forgetting something important? Am I way off in my estimates? The Minimum

Where do you set the outgoing mail server for use with asterisks mail system? I have entered the info in the voicemail.conf file correctly, but I am still unable to get the voicemail messages via email. I ran a tcpdump on the system while calling in and leaving a voicemail and I don't even see the system try and contact a mail server. HELP!!! Thank you all in advance. Sean Garland

Hi, Does anybody know of a VoIP compatible doorbell or door intercom unit? I've contemplated buying a cheap SIP phone, ripping it apart, and putting it inside an IP66 sealed unit... It would need: - At least one speed-dial key, or some way to make every button dial the same extension number - PoE (power over ethernet), so I can power it off the central switch - cheap enough to rip apart

Hi, Just started using an asterisk-based PBX with Polycom IP501 phones. Am Fairly satisfied and am starting to get into FTP setup of the phones. Have figured out most things except for how button remapping works. In sip.cfg, I have this entry: <keys key.IP_500.31.function.prim="DoNotDisturb"></keys> This works as expected but if I try to change the remapping to any

Greetings, I need a 2 way intercom for separate kitchens to communicate without having to walk back and forth. The speaker has to be loud but clear, not distorted. Sometimes the kitchens can be noisy. It needs to be easy to use. It needs to be easy to clean. It would be nice if it used POE. Eventually I would like the kitchens to be able to dial different parts of the restaurant when I

Hi, everyone: I'm in the processing of deciding what IP phones we should use with our Asterisk server, and I wanted to get feedback from the user community on the quality, reliability and ease of operation of Snom phones. What do you have to say about these phones? Are there other phones you'd suggest along with or instead of Snom? Thanks, -Stephen-

I am trying to get one of the function keys on the Snom 200 working as an intercom. However, I can't get the other Snom 200 phone to auto-answer. I found some posts in the archives from Christian that talk about intercom=true and also the Call-Info header. However, I can't get either one to work. I have tried firmware 2.04g,2.04h,2.05f,3.33 and none work. I am using chan_sip2z.c and

nslookup google.com ;; Got recursion not available from 192.168.1.236, trying next server Server: 192.168.1.235 Address: 192.168.1.235#53 Non-authoritative answer: Name: google.com Address: 172.217.4.78 Interesting little bit about the "Recursion not available" On Thu, Jun 30, 2016 at 9:52 AM, lingpanda101 at gmail.com < lingpanda101 at gmail.com> wrote: >