similar to: mini-ITX suggestions

I've seen the embedded posts. Is anyone running Asterisk on the MINI ITX? James Taylor MetroTel 3505 Summerhill Road Suite 11 Texarkana, Tx 75503 903-793-1956

Hi, I have a EPIA mini-itx board that I have been running Fedora 4 on. I want to install CentOS 4.4 on it since FC4 is no longer supported. The install goes fine but when I reboot the machine after the install I get errors like the following: hda:<4>hda: dma_timer_Expiry : dma status == 0x21 There are other errors about not being able to access the disk and eventually the kernel panics.

Hi Everyone, I'd be grateful if anyone can help with a couple of queries I have. Recently I downloaded Centos 3.3 and cannot get it to install I my system. The system I am using to install is a based on an original EPIA Mini-ITX m/board. At a certain point in installing it comes up with an error saying something like "system not supported". Can anyone advise if they have got

Hello everyone, Does anyone out there have actual experience with running * on a mini-itx board from VIA? They look good, but I have some reserves because of VIA's problems with PCI latency in recent years (audio dropouts, wierd things happening). I am looking at the EPIA CL-10000. For $270, I can get a CL-10000 (1ghz C3, dual ethernets, etc), 256mb RAM, and a nice small (12 x 2 x 11)

i had such problems on my mini-ITX. when sharing irq's with video or sound card, network traffic during ogg playing (for example on nfs) or quick moving windows crashed the interface. ifconfig down/up resolved the problem. it has been solved for a while now (i couldn't reproduce this problem) i think. regards, OLivier Le Jeudi 12 D?cembre 2002 03:45, The Anarcat a ?crit : >

Just to drag this thread on a bit further ... I've been looking into these little boxes, thinking I could use one as a firewall/gateway. My one requirement is that it would need to have two PCI slots (one can be low-profile), and although I've seen PCI riser cards that can give me two slots, they've been rare, and cases that are suitable (i.e have the space, and back panels are

Hello, I'm trying to put together a low cost - low powers PBX appliance for several customers. I have purchased a couple of the soekris net4801 boards and have asterisk up and running on them fine but they just don't quite cut it in the processing power department. I've been able to get about 10 simultaneous SIP calls with simple ulaw (no encoding decoding). While this might be OK for

I would like to ask what people think the best way would be to build a low-power consumption, passively-cooled system. For example,one could use a fanless-Eden (mini-ITX/EPIA) system, but the loss of FPU power would limit performance. The obvious choice for FPU work are the Intels and AMDs, nut they're all power-hungry radiators. Is there something that can offer the quiet, power-savings of

In asterisk 1.2 branch SVN 51363 zaptel svn 1980 libpri svn 393 addons svn 332 My equipment is a Via EPIA minit-itx CN10000 1.2ghz, 1gb ram and a tdm400p (4fxo). A call comes from zap, a SIP ulaw receives the call, talks for a while and when SIP users tries to park the call, then dozens of... WARNING[3853]: channel.c:781 channel_find_locked: Avoided initial deadlock for '0x91bb840', 10

Hello Before I order a Travla C156 case (http://206.14.132.88/products/Travla/c156/C156.html), a Via mini-ITX motherboard (either the fanless ME6000 http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=4 or the fan-equipped M10000 http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=163 ) , and a PCI FXO card from Digium or OpenVox... has someone already

I am looking into convising the boss to get me a mini-itx system to replace my workhorse notebook (I have to have a corp notebook and I can remote terminal into a Centos server from it). So I have been playing with one mini-itx system (the decTOP) and am looking at my options. I want a fast processor, 1Gb memory, LAN, 4USB, VGA. Wireless and bluetooth optional USB dongles along with a

Hi, haven't found anything in google's, i wonder if there is a comparative page of what to expect from running * on motherboards like the EPIA and similar ones. Since i have not used *ever* such kind of mini atx form factor boards, I have no clue about their performance. SIP-SIP communications, voicemail SIP-TDM communications, voicemail how may users (SIP hardphones and analog phones

Hi Kristian, Anywhere I can read about this Soekris/AstLinux project? ... Regards, Hans -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]On Behalf Of Kristian Kielhofner Sent: Thursday, February 24, 2005 6:02 AM To: jim@vanmeggelen.ca; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users]

I own a ME600 EPIA Mini-ITX main board with the latest Debian distro (kernel 2.6.8) with isdnutils-base, libcapi20-dev, libcapi20-2, isdnactivecards installed. I have a QuadBRI module by Junghanns with bristuff-0.2.0-RC3a (with asterisk-1.0.3, zaptel-1.0.3 and libpri-1.0.3), and chan_capi-0.3.5. I followed all INSTALL instructions, but I have some strange behaviour. All modules seems to be

Hello, I don't know if it's ISOLINUX or a broken BIOS, this is the first time ever seeing this error. "Extremely broken BIOS" on a EPIA -M10 BIOS Rev 2.07 (latest ver available) EDEN VIA mini-ITX mobo. ISOLINUX on RH8 ver 1.75, RH9 ver 2.00 and Yarrow ver 2.06 all produce the same type of error. RH 7.3 and Lindows boot and build without any problem but I don't think they

-------------- next part -------------- An embedded message was scrubbed... From: Steve Rodgers <hwstar at rodgers.sdcoxmail.com> Subject: Via Mini-itx anaconda install failure Date: Sat, 1 May 2004 14:31:43 -0700 Size: 849 URL: <http://lists.centos.org/pipermail/centos/attachments/20040501/e69b2948/attachment-0005.mht>

Is there anyone who has successfully put together a "high-powered" mini-itx ZFS box that would be willing to post their system specs? I''m eyeballing the KI690-AM2... http://www.albatron.com.tw/english/product/mb/pro_detail.asp?rlink=Overview&no=239 ...but am having a difficult time locating it and a suitable case currently. I was in negotiations with a hardware source,

Powerful enough to run a small asterisk server though not sure if the drop down in size from a mini-atx or a micro-atx but I'm sure someone will try. http://www.geek.com/first-look-via-px10000-pico-itx-motherboard Regards, Dean Collins Cognation Pty Ltd dean at cognation.net <mailto:dean at cognation.net> +1-212-203-4357 Ph +61-2-9016-5642 (Sydney in-dial). --------------

I've got Asterisk up and running on a VIA mini-itx M10K with a TDM-400 card but I'm having a terrible time with the sound setup. I tried RH9 and Debian distributions, with 2.4.18, 20, 22, 24 and 26 kernels. I've used the VIA drivers, ALSA drivers, OSS drivers and Kernel drivers with varying results. I can setup the audio to work with a few different applications, 2 channels and 6

Hi, As the subject suggests, I am trying to remote boot a Mini-ITX system. I am using PXELinux as the bootloader, and Memdisk (2.11) as the 'kernel'. My ramdisk image is a hard drive image based on PC-DOS. Two things go wrong during the boot process. 1. "INT 13 08: Failure, assuming this is the only drive" message 2. "Loading boot sector... booting..." message,