similar to: Snom 200 with two extns defined anyone?

Please forgive me if this is a silly question. I've been following this thread in the hope that I could put my * server and snom 200 into full-time service very soon. I need to find out how to have the lines configured so that it does not return a busy reply when only one call instances is engaged. Am I supposed to create multiple extensions on my asterisk dialplan to reflect the 5 call

Hello, I have been retained by a Building Management Company to install a combined Voice/Data solution for a Tennated Office Space. This space will rent offices, with telephone and internet service to inviduals or small groups of individuals. As fate would have it, the service will be provided in a building where we have a major Pop, with a DS-3 worth of ISDN PRI circuits, 345 megs of

Hello, I have 2 analogue ports on an Alcatel PBX patched to 2 FXO ports on my <mailto:*@home> *@home 2.8 running on top of CentOS. Both FXO Ports are on ONE Digium card. What I would like is: If someone calls extn 281 on my Alcatel PBX it is routed through to Extn 233 on my * thruogh FXO port/module 4 If someone calls extn 282 on my Alcatel PBX it is routed through to Extn 234 on my *

i am using the freebsd port, which seems to not yet have WaitExten(), which i kinda want to use thusly [ext-666] exten => _.,1,SetVar(areacode=666) exten => _.,2,Background(zz-in-who) ; give them list of extns exten => _.,3,WaitExten(10) ; let them enter extn to call include => extensions include => applications include => speeddials

Dear All, I seem to have stumbled across an AGI problem; I have written an AGI Script (bottom of this email); The script does the following; Makes a CDR entry when called Records the call Updates the CDR Finds a corresponding DNIS from the SMDR table (captured via a serial port logger) Matches up the record and updates the CDR. The script works perfectly in my test lab and has been doing so

if i go off hook and dial 666 from an internal sipura spa-x000 (at extn 141), it rings straight through to extn 666. using the same dialplan, from a cisco 7960 with 7.1 sip code (at extn 142), i have to go off hook hit NewCall punch 142 (or any valid extn in the dialplan) hit Dial then dial 666 wtf? sip.conf for crisco [fiji] callerid="crisco" <142>

Hello Fellow Users, This is my first post so please be kind :-) I am using asterisk@home <mailto:asterisk@home> with freePBX talking to an Alcatel 2400 analogue port via a Digium TDM01B - 1 FXO card I can make calls into the asterisk by dialling the asterisk extn number from the 4200. I can dial extns on the 4200 from asterisk by dialling 9(4200extn number) if I don't have any

On 12/25/2014 01:43 PM, Ady wrote: > >> >> >> On 12/25/2014 04:33 AM, H. Peter Anvin wrote: >>> On 12/24/2014 12:16 AM, Robert Yang wrote: >>>> Hello syslinux, >>>> >>>> Merry Christmas! These patches will make extlinux work with umounted >>>> ext2/3/4 filesystem, for example: >>>> >>>> $ extlinux

> > > On 12/25/2014 04:33 AM, H. Peter Anvin wrote: > > On 12/24/2014 12:16 AM, Robert Yang wrote: > >> Hello syslinux, > >> > >> Merry Christmas! These patches will make extlinux work with umounted > >> ext2/3/4 filesystem, for example: > >> > >> $ extlinux -i /dev/sdXN > >> or > >> $ extlinux -i file_block

Here is the current dial plan section: [custom-michael] exten => _900,1,Playback(custom/extn-xfer) exten => _900,2,SayDigits(${EXTEN}) exten => _900,3,MixMonitor........... exten => _900,4,Dial(SIP/${EXTEN}|${DEFRT}) exten => _900,5,Playback(custom/extn-xfer2) exten => _900,6,Goto(custom-michael,901,4) exten => _901,1,Playback(custom/extn-xfer) exten =>

> Hello syslinux, > > Merry Christmas! These patches will make extlinux work with umounted > ext2/3/4 filesystem, for example: > > $ extlinux -i /dev/sdXN > or > $ extlinux -i file_block > > Also it can work with something like: > $ extlinux /dev/sdXN --reset-adv > or > $ extlinux file_block --reset-adv > Thank you. The 'extlinux' command

> > Hi Ady, > > Thank you very much, I prefer this one, add the extN support to > linux/syslinux-nomtools, create a new "e2fs/syslinux" may make things > more complicated for the user, I will make it as: > > 1) If it is a extN device, then root privilege is not required. > 2) Otherwise work as before. > > Any suggestions is appreciated. > > //

Hello Everybody, I have a genuine problem in Asterisk setup. I have three inbound trunks in my asterisk box, everything is working fine but the only problem is when any user make an out- going call through his/her extension it goes with same number labeled on this. Can we set each of these lines to have fixed outgoing numbers like if extn: 201 make an outgoing call the recipient should

pstn -> sip gw -> * -> C7960 When I dial into * via the pstn, I hear the ivr menu just fine (good quality). I press 3000 (valid extn), and I begin to hear ringing however the ring back is very very choppy. I answer the C7960, and speech is clear in both directions. Place the C7960 extn on hold, and the MOH is very choppy. Checking 'sip show channels' indicates both the sip gw

Christian, Just a quick heads up warning that something seems to be amiss on the Snom 200 running v2.03h code. The Message Waiting Indicator is blinking (due to a voicemail left in Asterisk) as its suppose to. Some time later the LED stops blinking (as though no voicemail); then later it starts blinking again. I left a voicemail to x3008 (button 2) this morning at 8:48am, and purposefully have

The followings WORKS OK in Syslinux-4.06 LABEL ** ^TEST IMG/ISO File. kernel /test/memdisk initrd test/filename.iso append iso # [if not use iso raw] TEXT HELP [Tab] >Use (i) iso initrd=test/filename.iso OR (ii) initrd=test/filename.extn ENDTEXT However sorry to say FAILS in Syslinux-5.01 Thanks in advance. Prof S W Damle

Folks: does anybody have an idea? how to capture the DTMF digits to a file, after an extn asnwer? then POST it to a url? Regards, JR

I have seen a number of people in this newsgroup asking for information regarding asterisk interworking with Vocal. I was able to configure Vocal and Asterisk so that calls originating from vocal can land on an extension in Asterisk. I would like to share this info with the group The scenario that I tested was as follows. A call was originated from extn. 1001 on Vocal and the call was made to

But do we store this information somewhere as part of gluster metadata or something... Thanks and Regards, --Anand Extn : 6974 Mobile : 91 9552527199, 91 9850160173 From: Aravinda [mailto:avishwan at redhat.com] Sent: 09 January 2018 12:31 To: Anand Malagi <amalagi at commvault.com>; gluster-users at gluster.org Subject: Re: [Gluster-users] Bricks to sub-volume mapping First 6 bricks

No, we don't store the information separately. But it can be easily predictable from the Volume Info. For example, in the below Volume info, it shows "Number of Bricks" in the following format, ??? Number of Subvols x (Number of Data bricks + Number of Redundancy bricks) = Total Bricks Note: Sub volumes are predictable without storing it as separate info since we do not have