similar to: Cisco 7960 phones.

I just got 2 IpDialog phones for use with my Asterisk system. I have been able to get the phones to just dial local extensions but it is not able to register with my system correctly. I would like to know if someone has set these phones up before and how they did it! Is there any examples for use with Asterisk? They seem simple enough to config with there web interface. Thanks

Ok here is another problem I have run into. I have a Sipura 2000 and I have been able to configure line 1 with only one small problem. But I can't get the line 2 working with asterisk. Here are samples of my sip.conf and extensions.conf. If I disable line 1 I can then get line 2 working. Is there a sample configuration for the Sipura to get both ports working with Asterisk. Sip.conf

I am trying to get the following phones for testing. Is there a distributor in the US that is able to sell me these Sip phone and ATA adapters? I can not afford the Cisco phones there too hard to configure and too expensive! 1 - Sipura SPA-2000 2 - Grandstream Sip phone BT-102 1 - Grandstream HT-286 1 - Snom 105 Sip phone. I have called and emailed chagres but they have not reply. Nor

I have a Cisco 7960 & IpDialogs that I am not able to use the transfer button on it. What happens is that it puts the call on hold and then it gives you a dial tone. You can dial but it will not transfer the call. What we are trying to do is transfer to extension 700 for parking so another person can pick up the line. We can not use the # key to do this due to we have several IVR's

I would like to know if anyone has come up with a script for 911 dialing rules that put correct information on our locations. We have our office in 3 different building one being our production & shipping dock. It is almost 2 blocks away. We are connected with Ethernet Wireless between the buildings and have Sip phones setup in the other 2 locations. All the phones are working just fine.

Ok here is a question that has gotten me stumped. I have an Asterisk system up and running. I need to connect it via the Internet to a Sip Cisco system. This is what they have. I have there IP address's and login. X-lite is able to connect to them and make a call! So I have the name right! CISCO router model: 2621 VoIP module: NM-HDA-4FXS I have done Google lookup and at the Wiki about

I would like to prevent * from dialing 900 and 976 numbers. I setup the following settings in extensions.conf. But this does not seem to work! I don't know what I am doing wrong please help! exten => 1900XXXXXXX,1,Congestion exten => XXX976XXXX,1,Congestion exten => XXX976XXXX,1,Congestion exten => 1XXX976XXXX,1,Congestion exten => 91900XXXXXXX,1,Congestion exten =>

I have 2 Snom 200 and would like to get them to work properly with Asterisk. With the Firmware 2.02t I am able to use the phone. But only one line configured. With there newer firmware 2.03o it will not allow me to make calls. But I can get calls on the unit. Again the 2nd line is not able to be registered. Is this an issue with Asterisk or Snom? I could use some example configuration

I have a problem that sometimes lines will go into what I call never never land. The Asterisk system will put a line with <Zombi> on it when you type show channels it will make the analog phone line dead. And on the CLI it says: astsvr*CLI>Zap/1-2<ZOMBIE>(macro-twoline-exten,s,1)Up Dial Zap/1-2|20|r I have tried to release it with soft hangup Zap/1 & also soft hangup

Hello I am still having problems with IAXTELL and FWD configuration. I get the following when I dial 17009965342 which is set as an example to dial to FWD people. 1+700+99+ 5 digit number. I have placed XXXXX where my passwords are. CLI> Executing Dial("Zap/14-1", "IAX/abatista:xxxxxx@iaxtel.com/917009965342@iaxtel") in new stack -- Calling using options

I have gotten the Cisco 7960 working with my Asterisk system under SIP. The version is 5.03 that I am using. Cisco Support said I should not upgrade to version 6 yet. My next question is the sound is patchy when people here me. But I can hear them just fine not patchy. I have the 188 page Admin manual and it seem not to say anything about improving the sound. All other phones like IPDialog work

Yes folks it's me a Newbie. Remember I am also a non-Linux person trying to learn. I have a production Server running Asterisk .5 12/02/03 CVS, and would like to upgrade it to the new .71. Has anyone come up with instructions (Documentation for us newbie) on how to do this? My server is running Mandrake 9.0 which I know nothing about! Sorry if this sounds stupid but all the instructions I

Hi all, DIAX 0.9.3 is available for download from the same place: http://www.laser.com/dante or http://www.geocities.com/tdanro The new DLL contain the latest updates made by Steve in the iaxclient library. Still just IAX1 is supported (for the moment). What's new in 0.9.3? - accept blank passwords; - accept for registration/calls host names, not only IP Address; - password no

This may be OT, but I can't seem to find how to do this. I have 7940/7960's with Skinny on them. When you start pressing numbers on the dialpad, you start building a number to dial. When I install SIP, that functionality goes away. You have to hit the speaker button, or lift the handset before you can start dialing. Is there a setting I am missing, or is this just a product of

Does anyone have the .bin file(s) to convert a Cisco 7940/7960 back to the CallManager image? I want to start playing around with the chan_skinny addition, but it seems the .exe's from cisco want to open a connection to a SQL server or CallManager (which I don't have).

I need to get 2 Asterisk servers working together. I have been reading and doing just about every example I have been able to find here on the list and the Wiki. It's now gotten to the point that nothing on box2 seems to be working. I seem to have a major problem understanding the format. Here is what I have so far. It's 3 days of hair pulling and nothing seems to work! Asterisk box 1

I have about 5 snom 200 phones working fine with everything. Voicemail, Transfers and all. Except I can't seem to use them to pickup parked calls nor place a call on park. I also have sipura-2000 with analog phones that are able to pickup parked calls and to park them. Most of them are on firmware 2.04g I have upgraded one to 2.05c for testing but this did not fix the problem. I get no error

Before I got down the path of converting a Cisco 7960 I have over to SIP I wanted to try and set it up using Skinny. The phone registers ok with Asterisk. When I call a SIP softphone extension on my network the call is made and I can answering it. However no voice is heard over the call. When I debug Skinny on the console after the call has connected I see the following messag: Recieved Alarm

Are you looking for local or Long distance? What will these T1s primarily be used for(inbound/outbound, domestic, local, long distance, international) How important are per minute rates to you? how many minutes do you expect to use per month? We are in Tampa Florida and have 15 T1s from several different providers so I may be able to refer you to one if it's a match to what you're

Maybe not the place for this but thought I'd post the info for others. I purchased a cisco 7960 off ebay and needed to convert to SIP for *. I know * supports SCCP but I wont go into that here. I'd read on voip-info.org that a contract could be purchased for approx $8 to allow me to download the firmware. I though, being in the UK, i'd get one through a reseller in the UK.