Displaying 20 results from an estimated 1000 matches similar to: "E400 or TE410 (digium) vs PRI 30M (Eicon)"
2003 Nov 21
2
Which ISDM BRI Card for Asterisk?
Hello all,
I wonder to have some feedback on using ISDN BRI Cards with Asterisk and
the Echo problem.
I have tried a simple BRI card with i4l driver and encounter huge echo
problem. I have tried to solve it with a Sw chocanceller without
success. What I'd like to know is wether some of you have used other BRI
Cards (I have seen reference to Eicon cards on this list) and if the
echo
2003 Nov 09
1
chan_capi & Eicon Diva problem
Hello,
I have an issue getting the chan_capi module to load in asterisk cvs
from today. Plain 2.4.20 kernel with melware patches for the Eicon Diva
Server Bri card.
I load the modules with: modprobe -v divas divacapi
I load the firmware with: divactrl load -c 1 -f ETSI -vd6
Output in /var/log/messages is:
Nov 9 19:26:26 voice kernel: Eicon DIVA - DIDD table
(http://www.melware.net)
Nov 9
2003 Sep 24
3
Call transfert with dial plan
Hello,
As I have problems getting transfert call working with my grandstream
SIP Phones, I woul like to know if it is possible to do it with a proper
dial plan in exten.conf.
I haven't found any information about that in the docs.
Regards,
Daniel ANDRE
--
Daniel ANDRE (mailto:dandre@iris-tech.fr)
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
2003 Jul 01
2
Problem with echo
Hello,
I can't have asterisk working without echo when I place a call from IP
phone (SIP or H323) to a PSTN Phone. The called number as no problem
with echo but there is a very audible echo in the SIP phone. This
situation occurs either when connected with ISDN card thru i4linux
driver and with my openline card from voicetronix.
Do you have any suggestion fo that?
Regards,
Daniel ANDRE
2003 Oct 01
1
MGCP Phone and Asterisk PBX
Hello,
Sorry for posting again my question about MGCP Phone and Asterisk But I
can't use it.
I'd like to know weather it is a pb of my confiuration (mgcp.conf), My
IP Phone device or asterisk.
I include my mgcp.conf file and may send some debug trace.
Thank you for any feedback.
Best regards,
Daniel ANDRE
;
; MGCP Configuration for Asterisk
;
[general]
;port = 2427
;bindaddr =
2003 Sep 05
2
Transfer (again!)
Hello,
I am building an asterisk PBX with some stuff to make a usable VOIP /
PSTN Gateway. I use the following devices:
SIP Phones from GrandStream for VOIP side
OpenLine4 from voicetronix for PSTN Side
I am building things step by step with some priorities.
I have now a working system able to place and receive calls from/to pstn.
Before attempting to bring other functions (like voice
2003 Sep 29
1
Can't place a call with MGCP Phone
Hello,
I have just received an MGCP Phone for test purpose and I can't place a
call from my MGCP Phone.
I can call my MGCP phone from a SIP Phone. Here is my mgcp.conf:
;
; MGCP Configuration for Asterisk
;
[general]
;port = 2427
;bindaddr = 0.0.0.0
;[dlinkgw]
;host = 192.168.0.64
;context = default
;line => aaln/2
;line => aaln/1
[192.168.10.10]
host = 192.168.10.10
context =
2003 Sep 08
8
Callgroup, Pickupgroup and SIP
I have just started to play with callgroups and pickupgroups..
I updates my * from CVS this morning (about 15 mins ago)..
I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf..
I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB..
Have I not configured
2003 Sep 04
4
update re. Grandstream + SIP + Echo problems ..
well .. good news :)
i've just put in
txgain=1.0
rxgain=1.0
in my zapata.conf
and upgraded the Grandstream Budgettones i'm using to version 81
of the software and all seems fine .. there is still an echo but after
the first couple of seconds of call it vanishes, as the echocancelling
kicks in .. so far my client is happy :)
now .. i have one slight problem left .. although most of my
2003 May 28
1
Voicetronix support
Hello,
I would like to know if voicetronix card (specially openswitch6 and 12)
can be used with asterisk. Is there any driver for this card?
Best regards,
Daniel
--
Daniel ANDRE (mailto:dandre@iris-tech.fr)
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
2003 Sep 26
0
trouble with MGCP Phone
Hello,
I have just received an MGCP Phone for test purpose and I can't place a
call from my MGCP Phone.
I can call my MGCP phone from a SIP Phone. Here is my mgcp.conf:
;
; MGCP Configuration for Asterisk
;
[general]
;port = 2427
;bindaddr = 0.0.0.0
;[dlinkgw]
;host = 192.168.0.64
;context = default
;line => aaln/2
;line => aaln/1
[192.168.10.10]
host = 192.168.10.10
context =
2003 Nov 04
1
Call Transfert with SwissVoice IP10S in MGCP mode
Hello,
Now that I have a nearly working configuration for my IP10S with * I
wonder if anyone has done call transfert with this Phone. In the IP10S
documentation they talk about the 'service key' wich is the key with the
white dot on it. With this Key, it should be possible to have a menu
with call transfert entries. This menu should (accordingly to the
documentation) depend on the
2003 Dec 17
0
Asterisk and Eicom BRI-2M or 4BRI-8M
Hello,
Dos anybody use these card with asterisk?
If so I'd like to have some tips on how to configure them.
Regards,
Daniel ANDRE
--
Daniel ANDRE (mailto:dandre@iris-tech.fr)
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
2003 Oct 30
4
SwissVoice MGCP IP10S
I have a SwissVoice IP10S but can not seem to get it to have dialtone or
dial on *. Calls to or from 3001 don't work.
Any ideas are appreciated.
Robert
mgcp.conf is:
[general]
port = 2427
bindaddr = 192.168.0.110
[ip10]
host = 192.168.0.5
context = from-sip
line => aaln/1
The portion of extensions.conf is:
exten => 3001,1,Dial(MGCP/aaln1,20)
exten => 3001,103,Hangup
2005 Jun 27
2
Eicon equipment, BRI Server or PRI?
Hello Everyone,
I am once again wondering about EICON. I have had no success with the
Diva Pro or Diva Pro PCI, so my question is, does anyone use an Eicon
Server BRI card on Asterisk? Or would I be better off trying to get a
split PRI?
Regards,
Greg
2005 Mar 17
3
Compilation problem chan_capi and Eicon Diva 4Bri
Hi *,
I want to integrate the Eicon Diva 4Bri Card to Asterisk.
Eicon drivers and capi is installed. I use the latest dev version from
eicon compiled and installed for my fedora 2 system.
I found the chan_capi for asterisk from www.junghanns.net. Also loaded
the patch and applied to the chan_capi source tree.
I changed the Makefile to include the capi20.h from eicon:
2004 Jun 10
2
Using Asterix and Hylafax with Eicon DIVA E1
Hi,
I would like to set up a high density FAX/PBX server, am looking at using
Eicon Diva E1 card with Asterisk and Hylafax sharing channels, is this
possible. I know Extensions can be reserved for voice OR fax with the
combination of chan_capi used for * voice, capi4hylafax on fax but then
channels must be dedicated rather than shared ie. would like to be able to
answer voice/fax on same DID.
2007 Oct 27
2
Little OT: Compilation of EICON driver fails with capi errors
Hello,
I want to use a 4 port ISDN card from EICON/DIALOGIC in our asterisk server.
The system is a Ubuntu 7.10 with kernel 2.6.23.1. The compilation of the
kernel finishes without any problems. I have downloaded and installed
the deb-source package that EICON/DIALOGIC offers. Th installation
script crashes with the following error messages:
# LOG ---- START SECTION read kernel version
2005 Oct 02
3
[Sorta OT] Eicon DIVA with asterisk@home
Hi;
I've got an AAH installation where a customer wants to install an active
Eicon DIVA BRI card. AAH is built on Centos 3.5 which is currently at
kernel 2.4.21.37. Support for Eicon active cards is built-in.
I've debugged and run the A@H install-Eicondiva script but when I try to
run divactrl load -c 1 -f ETSI -Debug I get a response :
A: can't get card type for DIVA adapter
2003 Apr 30
2
Eicon driver?
Hello,
Does anyone know what driver to use with an "Eicon Diva Server 4BRI" card?
My modem.conf:
--------------
[interfaces]
context=remote
driver=i4l
msn=16453
device => /dev/ttyds01
--------------
I get the following error:
--------------------------
== Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver)
WARNING[8192]: File chan_modem.c, Line 383