similar to: Cisco 7960, Nortel MICS, Digital sets, ...

I have gone through some archive about Nortel MICS (Meridian ?)+ Asterisk Integration but I'm not sure whether same as my case . 70 telephone sets | | Nortel MICS 4.1 --------- Asterisk | PSTN I have read the David Gomillion's Guide and got the idea . However, my plan is slightly different from what he did , I need to use Nortel MICS to connect to PSTN (I

Does anyone know of a 24 port ATA device that could be installed in a phone closet? Like a channel bank, but, instead of multiplexing onto a T-1 circuit, it would convert to SIP/RTP on a LAN connection. Thanks, -- Michael Welter Introspect Telephony Corp. Denver, Colorado +1 303 674 2575 mike@introspect.com www.introspect.com

I have been investigating more tight integration between * and the Nortel MICS... it appears that it is at least theoretically possible to have * store voicemail and log which stations call where. Both require a T1 card. The T1 card requires either a clocking module or the 6-port fiber module to provide T1 timing. Naturally a T100P or TE405P is required on the * side. To log which

Hello, I have researched a few postings where users mentioned being able to install Asterisk on Mac OS X Panther by adding some code after line 165 in the Makefile and then compiling. This has been unsuccessful for me. I downloaded the asterisk-0.9.0.tar.gz tarball and am trying to install from it. The output I get upon trying to make after editing the Makefile can be viewed at:

Is there is an open source ACD component for Asterisk? Likewise, is there an open source CTI component that will work with Asterisk? Regards, Jim O'Brien -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040504/e6ee98da/attachment.htm

I tried it w/ mine as well and it hung up on me because I just have Voicemail running not Voicemail2. It seems as though you have Voicemail2 because it's trying to play the Unavialable message. Just a thought though. Does it do the samething w/ [qout-phillyq] exten => 0,1,Voicemail(u1) exten => 0,2,Goto(default,s,1) Tim Thompson http://www.amatechtel.com (806) 722-2227

A customer contacted us today concerning getting a VoIP to PSTN system with a few IP Phones setup. Asterisk should fit his needs. It is not a big job, but I think that this customer is going to need onsite work. Please contact me off list if you are an interested reseller in the Washington, DC area. Sean _______________________________________________ Sean Robertson NETXUSA p. 800-289-6389

Hi I' ve just installed TE410P and asterisk-0.7.2 from tar.gz on fedora core 1. When i start asterisk it shows me this: /usr/lib/asterisk/modules/chan_zap.so: undefined symbol: ast_pickup_call Apr 19 16:52:32 WARNING[-1085304704]: loader.c:358 load_modules: Loading module chan_zap.so failed! Where do i look, how can i debug? Thanks in advance Jorge Verastegui G RedCetus S.R.L

I'm having problems with a new install of Asterisk (I had to reinstall because hard drive failed). I've used debian net install this time and for some reason WS FTP will not connect using SFTP (it keeps coming back with username and password fail) but when I use Putty to connect with the same password and username it works no problems. Any thoughts? Any other programs I can use for

Hi. I had successful confiured my Asterix PBX, but now I need to connect it to a Nortel Meridian phone plant, I got a Digium T100P on the machine I got the Asterisk and I already connect it with the phone plant, I need to know what configuration do I have to do so the ip extensions can make calls to the extensions of my plant Nortel. And extensions from the Nortel plant can call ip extensions of

We have a client with a Nortel PBX with digital phone sets. Due to T1 problems (old firmware), we are interested in trying a FXO channel bank. Is there a channel bank (or equivalent) which emulates Meridian digital phone sets? In order words, an FXO channel bank that's Meridian digital? Thanks MD -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am currently working on an Asterisk test system, and will be presenting a demo to the Board of Directors tomorrow night. I want to make sure I have all of my ducks in a row. The Asterisk system will be used to replace a Norstar MICS. The location has two PRI's coming in, with a few hundred DIDs. I know how to make * use the DIDs incoming, and I know how Nortel uses the DIDs. Now for the

To All; My current issues is a 5 second delay for call that is being transferred from the Norstar units to the Asterisk servers VIA a PRI. Is their anything that can be done to speed up the transfer on the Norstar. Below is my current phone config. < Norstar1 >----PRI----< Asterisk-1 >----IP-WAN----< Asterisk-2 >---PRI---< Norstar2> The Norstars are MICS 0x32 4.1

Hello Since I am getting a bit concerned about the SCO vs IBM issue, I was wondering if can I can setup Asterisk on FreeBSD is it supported ? Are drivers for Digium cards available on FreeBSD ? Thanks Ajit ----- Original Message ----- From: <asterisk-users-request@lists.digium.com> To: <asterisk-users@lists.digium.com> Sent: Wednesday, July 30, 2003 3:05 PM Subject: Asterisk-Users

Hi I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P and Nortel meridian option 11c release 25.40 with NTBK50AA card which is An E1 card. But the main problem is the first stage that no sync occurs the * card never syncs with meridian card I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk And I am assuming that meridian is using same as it is

Hi all, I have asterisk 1.4.26 (and I tried 1.4.29) connected PRI all 23 lines and for the most part everything works. Dialing out on 23 lines to phones works fine. I have to use the Local channel to call the intercom system (from call files). If I only call 1 intercom system at a time so it uses DAHDI/1 everything seems to work as I can call all 8 intercom systems and play a message. The

Hello, is it possible to connect a Nortel i2004, (i2002) IP Phone to an * PBX? I have seen on the net that there should be an SIP firmware aviable for the phone, anyone an idea where to get it? Because orginally they use a own protocol to connect to an Meridian, BCM or CSE1K. Another idea is to write a module for * that can handle this protocol. bye SLiME

Anyone has the settings to connect a TE405 to Meridian-1 line side E1? I saw T1 on the voip-info.org, but no E1. Is Nortel's E1 a variant of MFC/R2?

Hi, Does anyone have any experience connecting Asterisk to a Meridian system using an ATA2 and x101p? The basics work -- I can make outbound calls, receive inbound, and use flash to transfer calls, but certain things do not work, specifically with calls from internal extensions. - Does the Meridian/ATA2 pass any kind of callerid info? We do not have external callerid, but I'm not even

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've searched the mailing list quite extensively, but didn't come up with anything promising (some things wer helpful, though). Does anyone know if Nortel M Series (specifically the 2008, 2616, 7208, and 7310) phones can be made to work with the TDM400P card or if they are ADSI compatible at all? I kind of doubt they will work if they are