similar to: nexthop: free service to pstn via fwd/iaxtel

Jason Haar <Jason.Haar@trimble.co.nz> wrote: | Well I've just had a crash last night, and I've copies the log files off. | But I see nothing to suggest what happened. Also I've enabled core-dumps, | and no core dump exits, even though smbd died... | | If you look at the smb.conf file, you'll see I've put in a HUGE sleep | statement to be called via "panic

First thank you in advance for any help you may give I have brought up Samba 3.0.2a all is working very well except in a very specific instance on redhat 8.0 Compiled from sources with the bugzilla tracking patch 1147 installed though we had this problem before 1147 was installed When trying to print, print preview, or even generate a new report from access 2002 or newer and only when an HP

Hi, maybe this is a common question, in which case I would be very glad for a few pointers to corresponding information. Here is what I am hoping to achieve: A device (a DSLR, but that should not really matter) can be controlled by the computer via USB. The manufacturer provides an SDK and a couple of DLLs, but no USB documentation and certainly no source. It's using the SDK or

I have had a running 3.0.4 server running for quite some time with no problem. I built a new server with Fedora core 3 & ending up with SAMBA 3.0.11 running. Workstation running windows xp pro with sp2 applied Things are generally ok, but I am finding that group permissions at the workstation are not being carried to the user, specifically for Domain Users. Domain Admins appear to be

Hi, I am creating a stock control application. I have a table called "equipment_type" that stores a general description of a piece of equipment. This could be for instance: Canon 60D DSLR camera. I also have an table called "equipment" that stores all the equipment we have with their serial numbers. There may be many Canon 60Ds and they should refer to the

Hi, I just wanted to say that I've recently become a fan off the ogg movie format. I haven't really done much with video before, but I recently got a Canon DSLR which can record HD movies at 30 fps, 720p. The resulting files are great, but too large to share over the web. After trying a few different encoding tools, I quickly found that ffmpeg2theora is super easy to use, gives good

Hello, We have debian with 2.4.19-pre8 kernel We active the load balancing with two ethernets to internet, wih the command: ip rule add from 128.1.3.1/32 lookup host_proxy preference 2060 ip route add default table host_proxy proto static nexthop via 80.25.175.1 dev eth0 \ nexthop via 212.170.14.1 dev eth1 when see the route

Hello Everyone, I configured a server for a friend's Internet cafe. He has 2 ISPs. Here is what I did: ## NAT -A POSTROUTING -s 10.0.0.0/255.255.255.128 -o eth2 -j SNAT --to-source 82.77.148.83 -A POSTROUTING -s 10.0.0.0/255.255.255.128 -o eth0 -j SNAT --to-source 83.103.190.175 ## Removing default routing /sbin/ip rule add prio 50 table main /sbin/ip route del default table main ##

Dear Alexey, Sorry to bother you with this small question about nexthop syntax failing, but I haven''t found anyone else who can answer it - including Matthew Marsh or those on the lartc mailing list. The problem, with 2.2.19 and 2.2.20 kernels and versions of iproute2 up to iproute2-2.2.4-now-ss001007 (the most recent that compiles for me), is that this command does not work: # ip ro

Hello guys! I have the following setup: Linux router acting as a gateway for several subnets in the LAN. The subnets are: 127.17.0.0/16 (will go out via NAT) 195.229.x.x/24 193.289.y.y/28 213.189.z.z/26 etc. There are about 20 subnets including the private Class B subnet. I want to mark the packets that will go on the Internet, and leave out the packets that move from one subnet to the

I have two internet lines and I want to do equal cost loadbalancing on the two uplinks to the internet. This is what I do: ip route add 200.200.200.0/24 dev eth2 table 200 ip route add default via 200.200.200.254 dev eth2 table 200 ip route add 100.100.100.0/24 dev eth1 table 100 ip route add default via 100.100.100.254 dev eth1 table 100 ip route add 200.200.200.0/24 src 200.200.200.1 dev eth2

Hi, I am new in LARTC list. I had intermediate skills in networking. What I tried to do: Use 2 links with loadsharing + falt toletant (to add bandwitdh) ok ! I am use Debian Etch in router/fw With kernel debian default + routes-2.6.17-12.diff patch The Problem: The iproute2 just route thought the last gateway of nexthop rule. I was running tcpdump in 2 terminals, tcpdump -nni eth0 ...

Just wanted to let the people who have trouble with this know that I got it to work. I ditched my Gentoo install and fired up Fedora Core 4. But it was not working out of the box. When I updated to the latest kernel rpm 2.6.15 it worked like a charm :D So.. Fedora Core 4 with the latest 2.6 kernel ought to get you up and running. Hope this helps someone. My three weeks of anguish are

Hi all I've been trying to make * work with IAXtel to no avail, all seems ok in the config but am not getting anywhere This is what I'm getting from console (user/pass/dest # changed for obvious reasons): DEBUG[1133735216]: File chan_sip.c, Line 3841 (check_user): Setting NAT on RTP to 0 DEBUG[1133735216]: File chan_sip.c, Line 4891 (handle_request): Check for res for phone1

Hi, I'm wanting to configure a CentOS 6 server to have a fall-back default route via a second network interface. Given: - eth0 with 192.168.0.10 on subnet 192.168.0.0/24 gateway 192.168.0.1 - eth1 with 192.168.1.10 on subnet 192.168.1.0/24 gateway 192.168.1.1 Where eth0's network is a "back door" to the internet, and eth1's is the "front door", I believe I can

Hi all, I'm playing with Asterisk and I've already configured all needed .conf files. It works quite well, but now I need your help to tune the system: when I place a call from a softphone to the PSTN, I can't hear directly Telco's tones and I can't use its services, e.g. a mobile's answering machine. I don't know if I have to modify the dialplan or if it depends on my

Hello I am still having problems with IAXTELL and FWD configuration. I get the following when I dial 17009965342 which is set as an example to dial to FWD people. 1+700+99+ 5 digit number. I have placed XXXXX where my passwords are. CLI> Executing Dial("Zap/14-1", "IAX/abatista:xxxxxx@iaxtel.com/917009965342@iaxtel") in new stack -- Calling using options

Hello, I just started using asterisk, and have a question. I have setup two asterisk servers, A and B. A has a Digium TDM400 11B card (1 FXO and 1 FSX modules) and is connected to the PSTN. B has same, but is NOT connected to PSTN. I want to configure B to call A via iaxtel, and connect to the PSTN using A's line. How can I configure iaxtel dial plan for B in extensions.conf? I want to be

I am having problems with * not hanging up an incoming PSTN line, if that line is not answered before the person calling in hangs up. The line hangs in various states, it has hung with a busy tone, with no tone at all. I am running *@home and have a digium 4port line card. This was configured by the genzaptel command I then added trunks for each line. I also have a Pulver WiSip phone which I

Last night Mark and I made some changes to the IAXTEL tollfree outbound, and inbound access. The inbound access number has changed to: 248-724-0700. (This number is in Pontiac, MI Ratecenter, and is supplied by Telesthetic LLC, a next gen phone compnay) This number will say "Please dial your number now" at that point you can dial your 1-700-XXX-XXXX IAXTEL number assigned. In the