similar to: modem data calls through FXS / FXO digium cards failing

Hi all, forgive the question but is it possible to use PCI modem cards (aka winmodem's) as FXO/FXS ports in * ? what about external modems like the USR Sportsters? Thanks in advance, Bryan. Bryan Nolen Lead Developer http://Arc.Net.AU http://cdonline.com.au

Rich Adamson <radamson@routers.com> wrote: > >> I have been investigating on this list and found that faxing is not >> reliable between Zaptel >> cards and that Digium does not support nor >> recommend fax over the TDMXXB interfaces. >> >> Is this true ? Will fax not be reliable enough for my customer ? > > True... the TDM card (or its drivers)

Thanks Rich, I have an SPA-3000 laying around, so I will attempt to set it up in a little more conventional manner (although your method looks like a winner for a home test PBX). Would you mind posting or PM your current config to me, maybe screenshots if you PM. If I start with that it will take less time to get to the point where the SPA-3000 is a true FXO-FXS gateway for *. I will be happy to

Voxilla.com has a great config wizard for the SPA-3000 and * http://voxilla.com/spa3kasterisk.php I took the output from this wizard and dumped it on my test box with an SPA 3000 (with some mods to match my * contexts) and everything worked great. Calls from the PSTN to the spa3000 are routed to dialplan #8 on the spa3000, which dials * Both the FXO and FXS port register with * The SPA3000 is

Saw an ad in the latest Linux Journal for Sangoma's FXO/FXS analog cards. it was part of an ad for a reseller. I can't find anything on the resellers site or Sangoma's site either. Did the ad jump the gun or someting? Is this for real? Paul -- Paul Dugas, Computer Engineer Dugas Enterprises, LLC paul@dugas.cc phone: 404-932-1355 522 Black Canyon Park

Hi, We have a case where we need of 16 x FXS, 12 x FXO and 1 x E1. To do this using Digium products I need of 8 PCI slots. This is not possible to be done in one computer and that's why I try to start using TDMoE. Unfortunately all my tries are without success. The network is crashed everytime. Can you give me some ideas/suggestions how to solve this case? Best Regards,

we have got asterisk 1.0 (over 1 yrs old) version and very old zaptel version. That code is working only with 8 or less ports (accumulative) on digium fxs/fxo cards (2 cards with 4 ports each). the questoin is, what if we want 12 ports?..well, really, i don't understand the limitations? is it simply zaptel driver code fix? or kernel fix? or technology limitation? donno any tips would

Hi! Is possible to use X100p TDM400P, Tdm410p, Tdm400, A400p, Ax400p or any others digium card FXO for use Fax modem? Thanks.

I'm having major problems routing a modem (data) call through my Asterisk box. I've got a single incoming POTS line through my X100P, and a few extensions (and modems) plugged into the ports on my TDM400P. I've been using the system for a few weeks for voice applications and everything is working pretty well in that area. But just recently I was trying to place a data call on

Hi Mary Christmas to y'all ! I am trying to configure * with one TDM and one ISDN and Bri-stuff, all is ok with only TDM but when add ISDN I get following error: I have tried to switch fxs/fxo but then I get error also without ISDN, card is configured from Digium with FXS(green) modules are closest to the bracket. ZT_CHANCONFIG failed on channel 1: Invalid argument (22) Did you forget

Hello everyone, I'm trying to set up a Asterisk server. I have two cards - one is an BeroNet BN2S0 with two ISDN lines (4 channels): http://www.adcomtec.com/webstore/beronet_bn2s0.php?cat=90 and a Rhino R8FXX with one FXO module and two FXS: http://www.voipsupply.com/product_info.php?products_id=2940 I would like to set up an Asterisk server with 8 phones, which will share the phone

Can I configure an Adtran channel bank with a mixture of FXS and FXO cards and have them come into a single T100P T1 card? It seems like this would be a cheaper solution than trying to load a bunch of PCI cards into a PC. Also, when shopping for an Adtran (on ebay) - what do I need to watch out for as far as interfaces or capabilities to make sure that it works with a Digium card?

Hi, I am trying to make an outbound call from phone attached to FXS port. My telephone (VoIP) line is connected to FXO port (Zap/4) Default context for channel # 4 is 'directdial' here is part of my extension.conf [directdial] ignorepat => 9 exten => 9,1,Dial,Zap/4/ exten => 9,2,Congestion include => international [international] ignorepat => 9 exten =>

I have a couple of devices that need an analog modem to communicate outside of our Asterisk system. Most FXS gateways don't seem to support this... I have a stack of Sipura 2002's that are, AFAIK, worthless for this purpose. I've heard that Digium's IAXy FXS will work with modems, but I can't find any reference to that in their documentation. There is also the

Hi guys! I bought an device that it is used to connect two PBX, two modems or two phones. It has two RJ11 connections. If you plug two phones and pickup one the other one will ring. I am trying to use this device as a FXS to FXO converter with a X100P Clone. I plugged one end at the modem and the other one with a phone. The problem is that when I load the wcfxo module this device thinks

I need to do some modem testing at work, just to make sure that I can dial into an emergency serial console modem before I put it into a box and ship it. Unfortunately, we don't have easy access to a pair of POTS lines in the office right now. Looking around the test lab, we have a Cisco 3640 with a 2FXS VIC in it. I can plug my laptop's modem into one FXS port, and plug the serial

Hi all, I bought a Sangoma A200 card from an online supplier and explained exactly what I wanted, 3 incoming phone lines to PBX and a life line (some where to connect a standard BT phone to the PBX incase the power goes, making the BT phone ring). I was told to order 1 x FXS module (2 FXS ports) 2 x FXO modules (4 FXO ports) However being a complete noob, I have connected the 3 lines to the

Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly. The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indeed red, but from what I have read your not

Thanks. Is there a way I can log into the Merlin Magix to determine that? How else do I tell? ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Eric Germann Sent: Monday, February 05, 2007 8:16 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [asterisk-users]

I believe it will be hooked up to extension lines. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Paul Hales Sent: Monday, February 05, 2007 8:15 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] asterisk server as a voicemail server forlegacy PBX -- FXO or FXS???