similar to: D-channel down

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi, i'm new to * I've installed an hfc-s card (DIGI Micro V) with bristuff 0.0.2; when i try to call outside i get: -- Accepting AUTHENTICATED call from 192.168.1.110, requested format = 1024, actual format = 1024 -- Executing Dial("IAX2[pippo@pippo]/2", "Zap/g1/0123456") in new stack Jul 13 13:42:49

Hi, I'm trying to build a SIP / ISDN BRI gateway. I'm using asterisk and zaptel 1.0.6 with the bristuff patches. I have a Billion HFC card connected to a BRI ISDN line. Unfortunately each time asterisk tries to make a call on that channel, I get NOTICE[6236]: app_dial.c:759 dial_exec: Unable to create channel of type 'ZAP' == Everyone is busy/congested at this time When I try

Hi asterisk users, I have a inssue with incoming calls with wcfxo card, while receiving a call, I?ve configured my dialplan to forward the call to all mi home voip extensions and that works just fine, but while in the call, after a few seconds, the pbx starts the simple switch once more and keeps ringing the voip extensions log as follows:

Hello everybody. I have an customer asterisk 1.0.5 running well since 3 monthes, 2 TDM cards 4 FXO, 4 FXS. Since one week, unable to pass call between Zap and Sip getting the "exception on 15, channel 1" The * box is connected to an eads PBX and it seems that failure started when they make some changes on the PBX. Have someone an idea and what is causisng this failure? Here are the

What am I doing wrong here? Why is this happening? libpri is version 1.0.7-1 (debian package) asterisk is version 1.0.7.dfsg.1-2 (debian package) zaptel is version 1.0.9.2 -- Executing Dial("SIP/739-5935", "Zap/g1/0916000739") in new stack -- Called g1/0916000739 -- Channel 0/1, span 1 got hangup Oct 10 13:14:45 WARNING[7544]: app_dial.c:412 wait_for_answer:

I receive this error on the asterisk console and it is pretty much ALWAYS coming up. Sometimes there will be a break where it does not display. We had our PRI provider test the lines and they claim that there is no signalling problem. It doesn't matter if there are no calls or if there are 10 calls in progress the error is still displayed. I also get an annoying popping or clicking sound

I recently purchased a TDM11B so I could hopefully hook flash the FXO from either the FXS (on the TDM11B) or a SIP device. From the FXS, I've tried hitting # then transferring to an extension that flashes the line then dials the FXS again (3020). This seems to send me to a busy signal and the console tells me no such host of 3020 (the number I'm on). The call on call waiting gets sent

Hi Asterisk-ians! Need all of your help. I am stuck with this issue for last few days. I have one X100P installed in my system. My Asterisk is registered with another Asterisk Server/SIP provider as client and the call is successfully received by my Asterisk server (named as starwars). Now, the extentions.conf file states, the incoming INTO * should go out to fxo as below: exten =>

Hi list, I'm trying to connect a cisco 2620 to my asterisk box using ISDN PRI. But I got some problems. zttool shows "no alarms" and "Internally clocked". Asterisk starts fine, but doesn't bring up d-channel. And when I try to make a call, asterisk shows: NOTICE[16401]: File app_dial.c, Line 516 (dial_exec): Unable to create channel of type 'Zap' At

I am having some difficulty getting a T100P card to work with my PRI. When I attempt to make an outbound call via: exten => 1004,1,Dial(Zap/g1/NPANXXXXXX) I see the following on the asterisk console: -- Executing Dial("SIP/sbruton-b8ce", "Zap/g1/NPANXXXXXX") in new stack Apr 21 08:18:48 NOTICE[16401]: app_dial.c:554 dial_exec: Unable to create channel of type

Greetings to all, I am getting the following error on my PRI-connected Asterisk box, and am just wondering if anyone else has seen this, and if so how they solved it. Jan 18 10:10:23 NOTICE[6070]: chan_zap.c:7428 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1 Jan 18 10:10:24 NOTICE[6070]: chan_zap.c:7428 pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary

Hello, I have following problem with Sangoma A104 card: CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI

Hi, I would like to use a digum card to call an external number through my PSTN. I think that I have a problem in the configuration. Asterisk returns me app_dial.c:764 dial_exec: Unable to create channel of type 'Zap' I use Fedora core 3. I installed libpri, zaptel and asterisk. I plugged my line on the FXS module (green part). I make modprobe zaptel && modprobe wctdm without

I'm running an E400P. Every now and then Asterisk stops receiving incoming calls. This turns up in the messages log: Nov 25 10:49:12 WARNING[65541]: File chan_zap.c, Line 5793 (pri_dchannel): Ring requested on channel 1 already in use on span 1. Hanging up owner. Nov 25 10:49:15 WARNING[81926]: File chan_zap.c, Line 5793 (pri_dchannel): Ring requested on channel 1 already in use on

I also experienced this problem and the first thing that really helped out was changing the timing in the span line of the zaptel.conf. Change it to look like this (see below) and see if it helps out. I got the error much less after doing this and eventually got rid of the error completely by removing my raid drives, installing an IDE drive, enabling DMA mode on the Hard Drive, enabling APCI in

I am getting: NOTICE[180235]: chan_zap.c:7358 pri_dchannel: PRI got event: 6 on Primary D-channel of span 1 on my asterisk box and it seems to be causing a poping sound in the phones, I am wondering if anyone can shed some light on this. I have scanned the archives and get possibilities ranging form motherboards, to pri, to loaded module problems. Can someone tell me the best way to start

Hi all, I just posted this question before last week. Meanwhile after upgrading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to 1.0.8-BRIstuffed-0.2.0-RCh the same problem occurs, but seems to be more seldom. Attached is now the output of "zap show channel" . - I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode.

Hi, I still cant dial out on Zap and I really have no clue why. I'm using Asterisk Asterisk 1.2.6 and Zaptel 1.2.5 with Digium card 4 ports, 31 channels each and able to receive incoming calls and fax perfectly. I've done this in my dial plan. exten => 111,1,Answer() exten => 111,n,Ringing() exten => 111,n,Wait(2) exten => 111,n,AbsoluteTimeout(30) exten =>

Hi, I've created a test at "extensions.conf" like this with 3 steps: ; When dial 5555, get the first available channel and dial do 482343400 exten => 5555,1,Dial(Zap/g1/482343400,5,rt) ; When dial 5555, get the channel 20 and dial do 482343400 exten => 5555,2,Dial(Zap/20/482343400) ; Go to Voicemail 1234 exten => 5555,3,Voicemail(u1234) I've tried using just the