similar to: call-waiting caller-id

I am seeing strange behavior that I don't understand. Voicemail2 and voicemailmain2 work fine if I call from a sip phone directly connected to *, but if I call either of them from an analog line on the other side of a sip gateway, voicemail seems to ignore digits. If I am recording a message and press #, nothing happens except that it records the tone onto the message and I can't specify

Hello, One of the Sipura 2k's I'm using has a dialtone that occasionally fades to static when the user picks up the line. Are there any settings that I can check that would affect this? Regards, Christopher

Hello all, When I generate an out-going call from *, the DTMF detection is not working ? ASTERISK --> GW AS5300 --> PSTN But the DTMF is working correctly when it's an incoming call. PSTN - -> GW AS5300 - -> ASTERISK Well, I tried with the 3 dtmfmode of asterisk inband, rfc2833 and info, no way !!! Is it normal that asterisk try to setup the outgoing-call using ULAW ? if I

Can someone please explain what I am doing wrong here? I only want the extensions listed in long-users to be able to access the longdistance context. If I do this, I get a congestion tone no matter what I dial. If I add a [default] context and include => longdistance, then the local callers can call the long distance number fine, which is not what I want, but I still want long-users to be

Has anyone succesfully integrated * with a cisco voice gateway ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031214/3b1ba7b3/attachment.htm

Hi, I have the following basic configuration: - one X100P card - two IP Phones (connected to an ATA186) When an incomming call on X100P, both phones connected to an ATA186 rings (configured like that in extensions.conf). When a call is established between the two ATA phones and a call occurs from the PSTN line, the callerid is correctly displayed on both phones (as internal callwaiting

Good Morning, I'm having an issue with callerid display when calles are placed _from_ an mgcp device (8x8 ata w/mgcp firmware). Internally, there are several different sip devices and one mgcp device. Calls from any of the sip devices to any other device (sip or mgcp) have name/number displayed properly by the called party's phone. Calls from the mgcp device to any other device display

Hey all, I recently noticed that DTMF caller-ID was implemented in CVS, so I requested the service from my telco (the Dutch KPN) and tried to get it going in Asterisk (current CVS), without success so far. This system has 1 X100P, 2 TDM400P's with 4 FXS-modules each and 2 HFC-PCI ISDN-cards (zaphfc-driver) in it. The analog line I'm trying to get caller-ID working on is obviously on the

Hi, I have a problem with setting outgoing caller id to "nothing" (secret) on our Wildcard TE405P connected to a swedish euroisdn line. Caller ID seems to work fine when connecting the same line to a Ericsson PBX - so something must be wrong in my settings, but I don't know what. I've tried: exten => _*70X.,1,Set(CALLERID(name)="") exten =>

I have 2 questions regarding asterisk logs that I really hope someone can help me with. Jan 7 09:40:14 WARNING[1009517568]: File chan_iax.c, Line 3537 (registry_rerequest): Received unsolicited registry authenticate request from '209.242.15.34' I get this IAX message every minute or so. I have 2 asterisk servers that both register with each other. I can post the configuration again,

Hello, I've one astribank with 8 FXO unit and 8 pstn lines connected to the astribank. When I receive calls on my ipphone I get always Unknown callerid. It's is possible to receive the callerid from the lines on the astribank unit? This is my config: [channels] language=es context=from-zaptel signalling=fxs_ks ;rxwink=300 usecallerid=yes callerid=asreceived ;cidsignalling=bell

Hi folks, I have got a Cisco 12SP+ working (thanks Derek!) but I'm having a minor issue with it. When I use it to call another desk I get no CallerID. The receiving phone diplsays "asterisk" as the CID. Below is the skinny.conf stanza. [2207] device=SEP00308062B006 version=P002L2J2 context=intern callerid="Luke's Room" <2207> mailbox=2207 transfer=1

I'm having trouble setting the outbound caller ID on calls I make from my PRI trunk group. The PRIs are served out of a 5ESS. Telco has set the PRIs up for user provided caller id information, so I believe I just don't have it set up right in my dialplan or something. I can't seem to find an example of setting the outbound caller ID specifically for a 5ESS. Does anyone have an

Hello, When I upgraded a while back the caller ID stop working I have tried everything and searched the lists no answer. Please help!! I have two pots lines coming into the Asterisk Box caller ID is set in the zapta.conf Here is what our zapata.conf looks like [channels] busydetect=1 busycount=7 relaxdtmf=yes callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes

Has anyone figured out the way of getting the caller id for BSNL on Asterisk 1.4.2 I have tried following link http://bugs.digium.com/view.php?id=6683&nbn=24 but was not able to get it, although did not ge any error too. I always get the caller id as asterisk. Can someone please help. Regards, Sanjay Rajdev

Dear List, My problem is that the incoming Caller Id is not displayed on the local analog phones (connected to a TDM400 card). I receive the CID correctly from my telco, but when I place the call to the internal analog line, the CID is not propagated. An interesting point: when I try to place a new call to an already bridged line, I see the second call with the CID on the analog phone. The

Any body used patch, http://bugs.digium.com/bug_view_page.php?bug_id=0001719 to get the callerid for BT Line. I applied the patch successfully but could not get it to work. Any help. Here are the logs: -- Starting simple switch on 'Zap/1-1' Jun 17 18:22:31 NOTICE[426000]: chan_zap.c:4811 ss_thread: Got event 2 (Ring/Answered)... Jun 17 18:22:34 NOTICE[426000]: chan_zap.c:4811

Dear All, I am trying to setup an ISDN line from local telco on a digium card. The problem I am facing is that I am not getting any caller id from the telco. They say that they have enabled caller id. Please help me out. My zapata.conf -------------------------------------------------------------------------------------------------------------------- [trunkgroups] [channels]

Hi all, Hopefully you can help me. I want to turn off the audio "Call Waiting" beep that plays during a call. I have found the line in the indications.conf for Call Waiting but apart from setting the frequency to zero or the length to zero is there a proper way to disable this functionality. thanks very much alex This email and any attached files are confidential and

I have Asterisk setup in a SOHO environment. I have 2 X100P cards at Zap/1 and Zap/2. I have 1 TDM400P card with Zap/3 - Zap/5. I have subscribed to callwaiting, callerid and calleridcallwaiting from Qwest on the 2 PSTN lines - Zap/1 and Zap/2. My problem is when I'm in an active call to the outside thru Zap/1 or Zap/2, I can't pickup the incoming callwaiting call. I can see the