similar to: "Phone Unprovisioned" Message in IP 7940 ?

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031208/0128c586/attachment.htm -------------- next part -------------- Thanks alot. I found the problem, with SIP firmware image was 2.* large size SIPDefault.cnf leads to Buffer overflow, I kept firmware_version field and deleted rest. That helped in upgrading the firmware to higher version.

Hi, I am upgrading a Cisco 7960 phone from SIP V.5.1 to 6.0 and then will to go up to 7.5 However in my first attempt to go from V.5.1 to 6.0 this is hat happens: - The phone reboots - The phone then reads the file OS79XX.TXT from the TFP server. In the file I added the version "P0S3-06-0-00" - It starts upgrading firmware - Then I get the following message: (Upgrade Failed -

Anyone have experience with the 3-08-2 release of Cisco's SIP firmware? Are there any new features in the SIPDefault.cnf? Thanks, Ron

Hi, I just wonder, if it is possible, to suppress my own number on outbound dials with chan_capi. I took a look into the sources and think it might work with toggeling the "@" in front of the outbound msn in the dialstring. (Dial(CAPI/@msn... vs. Dial(CAPI/msn... But it doesn't work. Maybee I'm wrong and misunderstood the code. Thanks for any answers! Karsten

I'm starting out w/ a Cisco 7940, running the Sip image version 6.3. I've downloaded/installed asterisk via cvs. I've set the phone up to get its info via dhcp - the dhcp, tftp, astericks box & phone are on the same network. I've gone through and setup a test account per the instructions @ http://voip-info.org/wiki-Asterisk+phone+cisco+79xx but time I do a sip show

Running those versions of code, my 7960 will not register with Asterisk. The same 7960 is authenticating against another * server on line 2 just fine though - with the same settings in sip.conf. On the failing * server I am just getting 401 unauthorized errors on the console. From the phone's shell I get that t is registering, but not authenticated .1. from show reg. Any ideas would be

Dear All, I'm trying to configure my new phone Cisco 7960 to work with asterisk. I followed http://www.asteriskguru.com/tutorials/cisco_7960_ip_phone_configuration.html and I got into the point where I can see on the the display line indication showing "55 <phone icon with x>" so it looks like the phone is not registered. The phone and the asterisk are in the same local

Hello Everyone, This morning I received a personal email from a recent poster asking "Why is Mr. Eastep so mean?". The post went on to explain that I had responded abruptly to the person''s request for help and asked why I wasn''t more helpful to people attempting to understand something new. Good question. Over the last nine months, I have been struggling to deal with

I have three questions about my 7960 phone that I can't discern from the docs/wiki. 1st - If I change the SIPxxxxxx.cnf file to change registrations it sets up new lines as expected. If I delete a line it doesn't get removed when I reboot the phone. I have to go to the phone, unlock it, and reset the SIP parameters. How do I make it "forget" what it has programmed and

Hi all, I compiled/installed chan_capi.so without problems. When I launch Asterisk, I get the following error: --- [chan_capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338 mkif: ast_capi_pvt(91xxxxxx,*,pstn,0x2,2) (1,2,64) (0)(0.800000/0.800000) 0 Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338

Hello all, I've got a Cisco 7960 running version 7.4 firmware (heard there were problems with 7.5) and I can't get it to register with Asterisk. I've stripped down my configs on the phone to a bare minimum, and posted them below. Basically, the Cisco phone sends absolutely no packets to the proxy when it gets booted. If I make an outgoing call I see traffic getting to Asterisk, but

I need to set up an office full of Cisco 7960 phones behind NAT with the server out in Colo. The first test phone registers fine, but the second one does not register. The first phone's registration looks like so: /SIP/Registry/3115552368 :64.169.xx.yyy:38836:3600:3115552368:sip:3115552368@64.169.xx.yyy:5060 When the second phone tries to register, it gets back a 404 not found. Not a

Hi all, So I have been reading through the docs available online and the different threads on this list, but I cannot seem to get this phone to work. I have configured the OS79XX.TXT and SIP/SEP*.cnf files (see attached), when I configure the phone to point to my tftp server and reboot it I get this message: Connection received from 10.6.0.224 on port 50608 [09/02 12:16:11.750] Read request

Hi everyone, I googled this followed the instructions, but it hasn't work for me yet. I have universal setting in SIPDefault.cnf and phone specific settings in SIPXXXXXXXXXX.cnf. But it doesn't get registered. I need to register it on two different asterisk boxes. So my SIPXXXXXXXXXX.cnf looks like this: phone_label: "Zeeshan A Zakaria" line1_name: "523"

I have been trying to get multiple lines on the 7960 to work for several days. i have read all the posts I can find and have run multiple "sip debug" and have gotten no place on this. Here are the relevant section of the config files: sip.conf [scott] type=friend host=dynamic username=scott secret=scott context=default mailbox=6101 callerid=Scott Henderson [scott1] type=friend

Hi all, i have a problem with some cisco 7960. Yesterday i did a firmware-upgrade from 3.1 (1.2) with P0S30203.bin as described in the most documents. Now i get the message Phone unprovisioned and in TFTP-Log i find the following line: 07.03.2005 19:58 :Timeout error sending P0S3-07-3-00.bin to 192.168.0.83, 0 bytes So i think it now wants to load the file P0S3-07-3-00.bin. But i have not

I have Asterisk version 1.0-RC1 running on Debian Woody. I have 1 analog phone working, 2 inbound lines working, X-Lite is working. The problem that I am having is with Cisco 7960 with SIP version 7.2 software. I can make outbound calls and they work fine, I even get a notice that I have voice mail on the phone and it seems to register properly but I can seem to dial to the phone.

Hi! I did manage to load phone with SIP image : SIP70.8-0-3S, made SEP-MAC.cnf.xml, but phone never read the configuration from it. On the screen it's written "Unprovisioned", and phone is not trying to register with asterisk. Please help!! MihaelaMJ -------------- next part -------------- An HTML attachment was scrubbed... URL:

This I am sure is a very easy question, but I can't seem to find the answer. Here is the scenario: cisco 7940g phone has SIP 6.3 firmware applied the file SIP<mac>.cnf does not seem to have a place for it: image_version: P0S3-06-3-00 #line 1 settings line1_name: "5010" ; Line 1 ExtensionUser ID line1_displayname: "5010" ; Line 1 Display

Hi Everyone, I am having some issues getting my 7961 working with Trixbox. I have loaded the SIP code (8-3-3SR2) fine but when the phone boots up it goes into an unprovisioned state. A status message shows up and says ?Error Verifying Config Info?. I have read quite a bit on this topic (getting 7961?s to work with Asterisk and TB) and only came across a few postings where other people