similar to: Implementing a ringback test function for Zap channels

-------------- next part -------------- An embedded message was scrubbed... From: Steve Rodgers <hwstar at rodgers.sdcoxmail.com> Subject: Via Mini-itx anaconda install failure Date: Sat, 1 May 2004 14:31:43 -0700 Size: 849 URL: <http://lists.centos.org/pipermail/centos/attachments/20040501/e69b2948/attachment-0005.mht>

I've been monitoring this problem for almost a month now. I realized that it is more extensive than what I described previously. I can very easily replicate this problem on every Zap channel. Following is the senario: 1. Call Zap/5 via say SIP/15 -> Zap/5-1 created and starts to ring 2. Call Zap/5 via say SIP/21 -> Zap/5-2 created and starts to ring 3. Hangup SIP/15 ->

We have an asterisk box with the following configuration: - AMD Athlon XP 2400+ - 512 MB RAM - SUSE Linux 10.1 - a Digium card TDM400P with 3 FXO - another Digium card TDM400P with 4 FXS - asterisk 1.2.7.1 - zaptel 1.2.4 I already checked that those cards aren't sharing interrupts (by cat /proc/interrupts): 0: 14119786 XT-PIC timer 1: 10 XT-PIC i8042 2:

We are trying to set up some scripts to test asterisk under various loads. What we are doing is trying to load a bunch of calls in to various queues atuomatically from various numbers etc so we can see how it behaves. I think we can do this by loading files in to the var/spool/asterisk/qcall directory. However the format of this file has a field named identifier which appears to be a file

Hello, I?m trying to leverage R_ToplevelExec to implement C level try/catch. The way it is implemented allows for running a function in a top level context. This context gets an empty handler stack, so either the function runs correctly or it jumps. When it jumps, it does not find a handler, so it jumps to the top level context. R does not allow me to call begin context and end context

Good day, I've got around to installing an X100P card in my computer to try out asterisk. I noticed (and people who were testing with me also noticed) that when dialing from my SIP soft phone to the PSTN, the ringer tone changes after 2-3 seconds, precisely when the Zap channel takes over the call. Is it possible to eliminate the first ringing? Is there a reason to this

Hi all, Has anyone made up custom ring tones for the Polycom SIP phones? We use different rings for different lines, but the ones it comes with are all very similar. In the interesting of sharing, here's one I made up for paging: <PAGE_BEEP se.pat.ringer.13.name="Page Beep" se.pat.ringer.13.inst.1.type="chord" se.pat.ringer.13.inst.1.value="12"

Hi, I'm trying to track down why I'm getting calls dropped on an infrequent basis between two asterisk servers which are at the same physical location and connected to each other with UTP ethernet. Here is the connection diagram Asterisk Server 1 ===UTPENET== Switch ====UTPENET==== Asterisk Server 2 I see sporadic RX and TX frame retries when I enable iax2 debugging on either box.

Working on a paging system for one of my sites and running into something I can't believe is this hard. In one of the zones, they want to have three different extensions ring over the pa system, using it as a loud ringer. Now the paging system does have a loud ringer built in and I can easily have it do a simultaneous ring, but all of the extensions will sound the same over the loud

I am using SugarCRM together with the asterisk plugin, which allows me to click a number, SugarCRM calls my extension then places the call when I pickup. I would like to have that extension auto-answer. I set it up as line 3 on my phone so normal calls do not get auto-answered. However, I have not been able to get this to work. Has anyone implented this? This is what I put in the config file

In ipmid.cfg I have: <G3INTERCOM se.rt.10.name="G3INTERCOM" se.rt.4.type="ring-answer" se.rt.4.timeout="1000" se.rt.10.ringer="7"/> In sip.cfg I have: <alertInfo voIpProt.SIP.alertInfo.1.value="G3INTERCOM" voIpProt.SIP.alertInfo.1.class="10"/> I set up a test extension: exten =>

Hi, I'm trying to set up my SNOM 200 with extensions, with different ringtones - but it doesn't seem to work. I've defined two extensions for it in Asterisk and in the SNOM 200 configuration. In the SNOM home>settings>SIP>Lines config page, I have set the ringer for the first extension to "ringer1", and "ringer6" for the second. In

Hi, I've noticed that sometimes instead of getting a regular ring tone when calling out on a Zap channel, I get this obnoxious loud noise which forces me to hang up. Is this a problem in the Zaptel driver? I seem to recall that ringback tones are generated by zaptel when dialing out from a SIP phone over a Zap trunk. Thanks.

Hi guys I'm using asterisk 1.4 and going on to Snom phones. I'm trying to add a sip header to make the Snom phone use a different ring tone on one particular incoming number. I have added the following to the dial plan of the incoming context +------+------------------+-------+----------+--------------+-------------------------+ | id | context | exten | priority | app

I am preparing to setup a system using Cisco 7940 and 7960's I have the 7.1 SIP firmware on them. One issue I have run into is how to silence the ringer if a call comes in and you don't want to take it. Many phones have a DND button. I know the 79XX has the DND in the menu but it is to cumbersome to go into the settings then phone preferences then the DND and select yes. Is there any other

Hello to the list, I have a question about Asterisk/app_rpt: When a signal is *not* being received and or transmitted by the radio system attached to Asterisk/app_rpt via its interface, is the incoming and or outgoing data suppressed (silence suppression)? In other words! At idle but still connected to some other device, what data will be transferred? I currently don't have access to a

I'm trying to change the ring tone on my 7960 from the dialplan. I've tried the example on the wiki but it doesn't seem to work. Something like: exten => 3010,1,SetVar(ALERT_INFO=<Bellcore-dr1>) ; selects Ringer exten => 3010,2,Dial(SIP/3010,15) I'm not sure what the Bellcore-dr1 ringer is supposed to be. I've tried replacing ALERT_INFO with another ring tone

Hi Andrew - > I have a need to be able to identify incoming calls based on some factor > (could be time of day, caller ID, dialed number, it doesn't matter.) -- > Assuming Asterisk can differentiate between the calls I want, how do I inform > the IP501? There are "only" three line appearances -- I can't simply just > ring a different appearance since there

1. How do you set the music on hold to work with asterisk. Right now when I place a call on hold the caller hears nothing. MOH works with all my other IP phones. 2. Ringer Volume. How do you set the ringer volume? So that it's set on reboot. Thanks

Hi, I have a customer with a definitely low-tech need: he has a noisy storeroom where he wants to hear the phones ringing so he can leave the storeroom and pick up the phone in his office. So all I need is a loud SIP ringer. Does this even exist? I know paging amplifiers exist, but that`s not what I need. Mike -------------- next part -------------- An HTML attachment was