similar to: Issues with Privacy Manager and Zapateller

Hey all...I'm just getting my * setup and right now all I have is an FXO but no FXS. I wan't to get rid of telemarketers by having * pick up the phone if there is no CID present, give the caller the Zapateller tones and then ask the user to input their phone number via Privacy Manager (yes I realize that this won't get us any where given that I can't re-ring the phones without FXS

Hi All, In theory if I do this; exten => s,1,Zapateller(nocallerid) exten => s,2,Privacymanager exten => s,3,Dial(a bunch of SIP extensions) My callers should only hear the anti-telemarketing tones if they call from a line that has no caller*ID and then get offered an opportunity to enter it, right? What I'm finding is that in the event of no CID the caller gets dumped into the

Been tinkering and found Zapateller appears to be answering when I didn't expect it to. I have something like so: [incoming] exten => s,1,NoOp ;Zapateller(answer|nocallerid) exten => s,2,PrivacyManager exten => s,3,Dial(${RING},20) ... I have a 1x1 analog * installation with a couple IP phones too. I've got the FXO interface connected to the home phone line. When I get an

Hello-- I've been playing with the privacy options on my home/home-office system since August last year, and have some results, gleaned from my CDR records, which over the last 13 months, number a total of 8672, which includes incoming, as well as outgoing calls. Before I start spitting out numbers, let me note that with the current setup, I haven't had to tell a single telemarketer

Andi - I have experienced the same issue you mention and gotten no reply as to a way to fix it. I finally implemented "blacklist" into my Asterisk and added "Anonymous", "anonymous", "unknown", "Unknown", etc., into my blacklist file. When those come in with an IP address instead of a phone number but have no real name, they get the

Hi all, I'm looking for some rudimentary insight on GotoIf() which seems to be failing on me in my dial plan. All I basically wish to do is block a particular caller. Sounds easy enough, but my ternary operator/plan currently is not properly being implemented. Can anyone spot where I'm being a momo? All extensions get forwarded to the following macro: [macro-forward] ; arg1 = phone

I am attempting to write in incoming context for calls. 1. If the caller id is given and it is not black listed it will Playback a greeting and then right the phone or go to voicemail under busy or unavailable conditions 2. If no caller id is given, then Privacy Manager will ask for the number. I am testing 6145551212 to see if the black list will work 3. If a caller id is given, and it is

Is it possible to give a caller three goes at an extension number then hangup? exten => s,1,Zapateller(answer|nocallerid) exten => s,2,PrivacyManager exten => s,3,Ringing(1) exten => s,4,NoOp(${CALLERID}) exten => s,5,SetMusicOnHold(random) exten => s,6,Background(silence/1) exten => s,7,Background(thank-you-for-calling) exten => s,8,Background(silence/1) exten =>

Hi All I'm tracing a very strange problem which I could reproduce with different versions up to 1.2.5 (sorry, didn't update to a newer one yet). Scenario 1: Problem does not occure. ============================= Sip Phone registered directly to the Asterisk. exten => i,1,Zapateller() exten => i,n,Playback(invalid,noanswer) exten => i,n,Hangup() Works like expected. I dial an

Hi all, I have the following in my extensions.conf: exten => s,4,GotoIf($["${CALLERID(number)}" = "8585979857" | "8585970327"]?15:5) The numbers listed above are known spammer numbers. However, when I call from any other CALLERID, it still directs me to s,15 which is the Hangup() application. Here are logs from the asterisk CLI: -- Executing

Does anybody know why I get this error when using zapateller: WARNING[1209214400]: File rtp.c, Line 327 (ast_rtcp_read): RTP Read error: Resource temporarily unavailable It's scrolls until a sound is recived from the line, then it plays the zapateller tones. /Mike

Hi, I have been using Zapateller with a TDM400 no problems at all, but recently I have ported our BT number to a VoIP provider, and have a strange problem. When I phone our number I first get the BT unavailable three tone sound, and then it actually connects the call via IAX2. So, I disabled zapateller in the dialplan and tried again. Would you believe it worked fine. Has anybody else come

My Asterisk fax detection used to work, but no longer does. OK. So, here's the deal: 1. It appears that the "faxdetect" command cannot be applied channel-by-channel in zapata.conf anymore, as Asterisk appears to the last "faxdetect=" command to ALL channels. 2. My stations are detected and sent to the proper extension; i.e., when I send a fax from one zap extension

Hi list! I'm trying to get PrivacyManager working but for some reason it always thinks that CallerID is present (when it isn't). I get this on the console: == Primary D-Channel on span 1 up -- Accepting voice call from '' to '0711234567' on channel 0/2, span 1 -- Executing Ringing("Zap/2-1", "") in new stack -- Executing

I am looking to install a web interface for Asterisk to transfer calls and look who's on the phone. If anybody has a working web interface please let me know. I installed the www.asternic.com (operator) But when I bring up my web browser it says transferring data and does not bring a browser. -----Original Message----- From: asterisk-users-admin@lists.digium.com

Hi. I'm new to Asterisk and have been working on setting up a development server but have gotten myself a bit confused. I'd like to implement the following logic for calls coming from the PSTN: Check for caller-id yes => keep going no => play SIT and prompt for telephone number Check time of day to see if it's day / night day => ring some phones

I'm having a problem with Asterisk picking up the Zap/1 and thinking its a new call when instead I've already been on the phone talking to a person. This is not my ideal setup and currently I have just an FXO card and Asterisk is in parallel with my phone system instead of being in the front. I'm not sure if the problem would be fixed by adding an FXS card and putting my phones on

Hi folks, My v1.6 Asterisk system logs all Call Detail Records to a PostgreSQL database, including those handled by the Privacy Manager. Unfortunately, even though I can use the CLI to see the information being submitted by anonymous callers to satisfy the demands of the the Privacy Manager, that information is not recorded in the database. Instead, all that is written to it: clid:

Hi all, Previously, I had the PrivacyManager working for me exactly as would be expected, but after upgrading the OS to Debian lenny and Asterisk to v1.4.21.2 that's no longer the case. Anonymous callers are still confronted with the PrivacyManager, but now no matter what I set the minlength value to, e.g.: exten => jaap,n,PrivacyManager(1,1) ... (I'm not using a

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I am running into some problems here with PrivacyManager. We used to use it without any issue, but now there seems to be several problems. We are currently running Asterisk 1.2.4. First, it seems that if the user does not press the pound (#) key after entering their number, PrivacyManager will fail. I have the minlength set to 10, and