similar to: Scope of the "h" extension..

Hi... I have the next problem.. I have a FXO card with i can make calls but i cant recive calls. At the consol, i get the next error: -- Zap/2-1 is ringing -- Zap/2-1 is ringing -- Zap/2-1 answered Zap/1-1 -- Attempting native bridge of Zap/1-1 and Zap/2-1 WARNING[262160]: File chan_zap.c, Line 2857 (zt_handle_event): Ring/Off-hook in strange state 6 on channel

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

Hi, We are using VOIP-SIP gateway to route outbound PSTN calls. Recently, I am getting == No one is available to answer at this time message, after making 5 SIP attempts (Retransmitting #5 (no NAT):), and the calls are going out through alternate Zap-trunk. I do not see any hit (sip-debug traffic) on the voip-gateway for the failed calls. Strange thing is that this is happening randomly,

Hi all, With the recent 's' and 'n' priorities, as well as the advantage of labels, dialplan management has become *much* simpler IMHO. However, I have one suggestion for possible improvement. In any of the Goto[If|IfTime] statements, the ability to do 's' + a number or label + a number would be _nice_. Example extensions.conf: exten => 1,1,NoOp(Start) exten

Hi, How does * read and process the extension.conf file?? The reason I ask is that I think it probably has a very large impact on how the calls are routed and processed by the system especially when it comes to least cost routing.. Let me explain...with an example.. I am using the * Devkit to get to grips with the system, so I have and X100P (Zap/1) and and S100U (Zap/2).. Below is my

Question: I'm using a .call file to make some test calls. The call file works great. When I try the same thing with the manager 'originate' action I get something weird - the originate action looks for the 's' extension in my context, regardless of what I supply as the 'extension' argument. The .call file does what I expect - it finds exten _9.,1,Noop(Looks good).

Hi All, I have registered "abhijit" for SIP in asterisk Server. I am able to register my softphone (SJPhone) to the server using the name "abhijit". But whenever I try to make any calls I am gettinh the following error message:- *CLI> -- Registered SIP 'abhijit' at 172.20.28.85 port 5060 expires 120 May 26 07:34:52 NOTICE[2761]: pbx.c:1738 pbx_extension_helper:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm using a TDM400 with one FXS and one FXO module (developer kit) and I've been testing termination from SIP phones to PSTN and it works fine, but asterisk accounting is doing something strange (for me). Scenario: 1 - extension 1009 (SIP phone - BT101) 2 - Zap/4-1 (TDM400 FXO module) extensions.conf: [dialout] exten =>

Hi in order to keep the dial tone after pressing 9 for 'outside line' I have this in my extensions.conf [localpstn] ignorepat => 9 exten => _9[123456789]XXXXXXX,1,Dial,${PSTN}/${EXTEN:1} exten => _9[123456789]XXXXXXX,2,Congestion this is properly included in the handsets' context but the dial tone disappears after pressing 9. am I missing something? thanks in advance

I need to be able to dial a long distance provider that uses an access number and an auth code. I would like to be able to program this so that the user can dial 8 and then the long distance number, asterisk will hopefully do everything in the middle. The sequence to accessing the provider is on my traditional phone speed dial as: * Dial local access number * Wait 5 seconds * Dial the auth

If I have multiple Sipura 3000 device how can I dial out properly? I can receive call without any problem and that's working really well. Caller ID is shown and when someone call he get's the welcome message the same way I have it configure with the X100P card. I don't seem to have any echo problem with the Sipura 3000 (but I do with X100P cards) My main concern is for

I had to return my TDM11B because it put the PSTN line 'off hook' the moment I plugged it in and wouldn't hang it up. The new card seems to work because I can actually make an outgoing call from the FXO port to my cell phone, so I'm pretty happy about that. But Asterisk doesn't recognize incoming calls from the PSTN. If I dial my home phone from my cell phone asterisk

Hi, I have two asterisks connected via IAX2 trunk. The first * use dial prefix 2XX, the second one 3XX. Calls routing works OK. But I don't know how to get dialtone of remote asterisk pbx. I'd like to get dialtone of asterisk #2 after dialing 3 and dialtone of asterisk #1 after dialing 2. I know something about DISA but I'm not sure if it is a right way. Can you give me advice?

I currently have the following outbound-local config in my setup.... I can call SOME of the numbers (like 337xxxx, and 998xxxx, and 323xxxx).. but when I try to dial say like 601xxxx I get a 404.. any thoughts, I can't see any difference in the config. Also, I seem to be able to dial any number that starts with a 9.. such as 977, 990, 903.. [outbound-local] ;exten =>

Hello Asteriskers, :-) We're trying to set up an outbound notification calling for system alerts with Asterisk 1.4.0. We generate a call file in /var/spool/asterisk/outgoing and the outbound call is originated through Zap/1 (Sangoma A200D to a Canadian POTS line). The problem is that Asterisk does not wait for the other side to answer before it starts playing the message. So the

HI, I'm using netmeeting to connect to an asterisk server and dial out. my extension looks like this exten => s,1,Dial,Zap/1/ Unfortunatelly the number that I have dialed in Netmeeting is lost ;-( If I hardcode the number on the line above, like ... exten => s,1,Dial,Zap/1/6642794 ... everything works fine What am I missing?

Hi all, I have the Asterisk set up and 2 softphone (Xlite) set up on two other PC. With the following configuration, I can use one softphone (2000) to call the other one (2001) and/or the voicemail at 2999. Here is my problem: 1. When I dial 9+nxxx-xxxx with one of the softphone to the PSTN via X100P card, I got busy tone. (i.e. I want to use the phone line which is connected to the

Hello all, I'm running Asterisk 1.4.5 and Zaptel 1.4.3 on Debian Etch i386 with the Digium's Dev Kit that comes with 1 FXO and 1 FXS. How do I configure my home PBX in such a way that whenever someone calls on my trunkline (PSTN) number, he/she will hear a customized ring tone, probably playing an MP3 file, instead of a boring standard ring tone while the extension number that is

Dear, I have this scenario: - PBX Asterisk 1.6.2.10 with private IP 192.168.0.10 - Behind a Cisco ASA firewall that connects to Internet - SIP trunk to Net2Phone with these parameters (nat=no): host=200.58.113.60 username=DOLLY secret=123456 port=5060 type=peer dtmfmode=rfc2833 disallow=all allow=alaw&ulaw nat=no canreinvite=no qualify=yes -Softphones Xlite The PBX can't register to

I am trying to collect enough information about an problem a client is having with its asterisk 11.17.0 x86_64. This issue was observed before in 1.8.20, and we upgraded to 11.15.0 and then to 11.17.0 with no solution. Background: this client is a telemarketing call-center that generates outgoing calls with close to a hundred agents operating simultaneously in peak hours. The system uses