similar to: 2 TE410P

I'm confused a bit about the following and was hoping to get some answers on this group - What is exactly implied when we say asterisk can connect to a PSTN. Does it mean connecting to the PSTN via PRI/T1/E1? If yes, then I assume asterisk does not need to do any SS7 signaling and all it does (playing the role of a PBX) is to connect to a Class 5 Switch at the CO. Is this a correct statement?

As per my problem yesterday with the Cisco 7960 and getting it talking to Asterisk on a different subnet, I gave up trying and just put the Asterisk box back on the internal subnet. However, I made two changes: - the external IP address is set on an ethernet alias eth0:0 - the main Linux router will change outgoing requests from 10.1.1.2 to the external IP (rather than the default behaviour of

Hi, Is there is some form of VAD on * for SIP channels, cause I have a problem with MOH. I made an extension which simply plays MOH, when I dial that extension with my ATA188 MOH sounds choppy if I talk on the phone the MOH keeps playing. I saw the sip channel (show channel SIP/*) and I see no packets going in/out when I talk then packets shows going in/out. I don?t have this kind of problem

Hello, I have finally received the details from Polycom to get into the backend configuration of their SoundPoint IP 600 SIP VOIP phone. The phone is quite nice looking but the configs are very sparse, not even a place for a secret(password) field in their SIP registration section. If anyone else has one of these and needs the passwords to get into the back end configurations, just send me an

has anyone seen this? -- Starting Skinny session from 192.168.13.102 -- Starting Skinny session from 192.168.13.102 triton*CLI> Oct 15 13:44:05 WARNING[213019]: File chan_skinny.c, Line 2243 (get_input): Skinny Client sent less data than expected. Oct 15 13:44:05 NOTICE[213019]: File chan_skinny.c, Line 2301 (skinny_session): Skinny Session returned: Success Oct 15 13:44:05

Hi, For MGCP users. Is there any success stories with any MGCP IAD vendor. I?m trying to find an IAD which works with Asterisk. I?ve tried the Cisco IAD 2430 without success; but SIP on this IAD works but it?s limited (no authentication, no notify messages, etc) and with higher density IAD (16 or more ports) it?s nice to control using MGCP. Any information will be apreciated ! Thanks. --

Hi Experts, We have a 4nodes RAC running and recently one is down due to hardware (fibre optics card) failure. Since running on 3-nodes RAC, the surviving server just keep crashing. We cannot figure out why is this happening but checking /var/log/messages we have these error (notice the msg before crashing at 8:32): Dec 12 08:30:45 x335-142 kernel: (2) ERROR: file entry name did not match inode,

I repost a message I put a week ago: I have a Cisco IAD 2431 which has MGCP protocol; I cannot make it to work againts Asterisk; at least there is some MGCP conversation between them but when I offhook a phone attached to IAD I get no tone at all. As anybody managed to get working Asterisk against an MGCP Cisco gateway ? Which MGCP version should I use ? Also I recently

Hi, I am having some problems mentioned below, the box is in production live environment with traffic around 30 - 100 calls. I am running T/E410P in a Dual P4 xeon with HT disabled. I am using zaptel 0.9.0 and asterisk stable 1 release. There is no gui, just mysql, perl (small script) and asterisk. System runs very smoothly if the calls are around 40-50 and comes one by one , however sometimes

Ivan, I found the same thing after doing an upgrade a couple of months ago and mailed this list. Never got a response. We had to fdisk the shared disks and remount them and restore db from backup. Chris Taylor Sr. Oracle DBA Unique Solutions www.unisolinc.com Office: 336-667-2447 xt. 2242 Cell: 336-262-5545 -----Original Message----- From: ocfs-users-request at oss.oracle.com

Hi, Can anyone suggest a good motherboard for the T/E410P cards ? Coz it doesn't get inserted in the the regular P4 motherboards due to PCI slot (32 bit) .... Any suggestions. Regards Azher --------------------------------- Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all! We use pxelinux for booting a diskless Linux from whitch we install all our systems. But we discovered some Problems: - With v1.75 the Kernel is fetched from the TFTP-Server with no problem, but it gets not started on Broadcom NetXtreme with newer PXE-Bioses - With v2.04, pxelinux even seems not to be able to fetch the kernel from the TFTP-Server. This affects also Intel's

I have problem to start domU with errors: # xm create -c x335-hien1-vm4.cfg Using config file "x335-hien1-vm4.cfg". Error: Device 0 (vif) could not be connected. Hotplug scripts not working in changeset: changeset: 7700:98bcd8fbd5e36662c10becdcd0222a22161bb2b6 tag: tip user: kaf24@firebug.cl.cam.ac.uk date: Tue Nov 8 09:48:42 2005 summary: Fix alloc_skb()

Hi All, I'm stumped on this and I looking for some clues to fix this. This is a new install of Slackware 12.1 onto an IBM x330 Server. Asterisk 1.4.20.1 plays the wav files and the Cepstral_Allison Swift just fine, but when I play the gsm files the audio quite choppy. And, the files produced from the MixMonitor don't even record any audio other than noise. I have a hard drive from

Owias, The 537 is, for the most part, a drop-in replacement for the Digium card. Please search the archive and the Wiki, as there have recently been several discussions about this exact subject. To my knowledge that is about the only modem that works, but keep in mind it is _not_ supported. That being said, follow the instructions on Digium's site for installing the X100P and you should be

We have been using pxelinux 1.62 for quite a while with great success Our machines are old Super-Micro rackmounts (PIII 1.4 GHz) and IBM x335. We recently acquired some IBM x336 servers with an updated Broadcom network adapter (compared to the x335). I couldn't get them to boot with pxelinux 1.62. The UNDI pxe envirenment would start, get an IP Address, locate the TFTP server, download the

I install CentOS 3.4 but don't found the databases mysql and postgres where are ? Thanks

The packaging/lsb/rsync.spec file is broken as shipped: It has a "Sept" month (rpmbuild here takes only 3-letter month names), and RH gzips the manpages, so the %files list can't find them. I also added doc/README-SGML and doc/rsync.sgml to the %doc files. Patch follows. Thanks for all the good work! --- rsync-2.5.6/packaging/lsb/rsync.spec.orig 2003-01-28 06:28:35.000000000 +0100

Hi, Ok, I put the new TE410 into our system last night - This is the second TE410P card. There is also TDM400P in Slot 5 with IRQ 9 which is shared with aic7xxx (SCSI) According to "cat /proc/interrupts", the new card is in the second slot using IRQ 11 (the first card is in slot 1 on IRQ 10 - but always has been). With only the original card install, there has been no issues with

I am having a problem with asterisk not being stable enough for production use. I have two cards, the digium TE406P, and the TE410P. The TE410P is the primary card that I am using but I would like to move to the TE406P for the echo cancellation and more flexibility of PCI slots available. General config info: 3 PRIs, configured as such: span=1,2,0,esf,b8zs span=2,0,0,esf,b8zs