similar to: 3Com NBX phones

How hard is it to integrate * into an existing 3com NBX setup? -Tim -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041004/bf01e3d9/attachment.htm

Hi, I've looked pretty wide on Google for this so I don't think it's been asked before. Has anyone had experience integrating Asterisk with a 3COM NBX system? The only way that I can see that looks possible is via the 3Com NBX ConneXtions H.323 product and then one of the H.323 Asterisk channels. Has anyone done this? Any pointers as to what to avoid or whether to even attempt it?

Does anybody know if the 3com NBX 100 phones will work with Asterisk? The phones require a boot image to be sent either through layer2 or layer3 before they will function properly after being powered on each time. Thanks.

Has any advancement been made to get 3102 operational in either a SIP or H323 asterisk environment. A post back in time mentioned a downloader service. >From the posts and articles I have read, the NCP is acting like a bootp and tftp server which uploads the configuration to the phone?? Am I close? if so, where does one get the SIP image for he 3102 and 2102 phones? I had 8 donated, but they

Greetings, We are looking at installing a VoIP system with Asterisk and are currently looking at the line of 3Com phones. Has anybody had success with using the following phones? We need to buy a lot and we don't want to end up with phones that don't work properly with asterisk. 3Com 3101 (model with speakerphone) 3Com 3102 Business Phone 3Com 3103 Manager Phone 3Com 3105

I sent this once already but it didnt show up in my mailbox so I am not sure if ever made it to the list. If it did, my apologies. I have an * system and an nbx. My plan is to use several grandstream 286s and plug the the phone cords into the NBX's analog FXO card. It works fine but after I make a call, the port stays open on the NBX and I cannot make another call for around five minutes

My new company is going to enter a bid competing with 3Com and Siemens solutions from others. Voice service is a PRI T-1 with a block of 100 DID numbers, a second T1 that will carry Integrated voice/data, 12 voice/768K for redundency. I asked this a week or two ago, now I have more details. Best/$ channel banks that work with Asterisk and Best deal on phones... 16 business, 34 basic IP

Hello, everyone, I am currently trying to get the asterisk server to talk with a 3COM NBX with T1 connection. My asterisk server has a T100p, TDM20B, a couple of sip phones. Now the sip phones are calling 3COM NBX phones fine, however, the analog phone has problem when dialing the NBX phones. The connection is established and the NBX auto-attendant picks up the call however the NBX end says that

i am just curious how many * systems are in the real world with more than one user. do you run a certain version? you dont update CVS do you? any admins running a system of over twenty? over fifty? over one-hundred? i deal with 3com and nec systems all day (i am cerified in the 3com nbx advanced network telephony, elite voice mail, CCNA, A+, nec ipk, and soon to be "asterisk school of

We've been talking about moving from our NBX100 to an asterisk solution for some time now. Well, to make a long story short, the call processor on our NBX has went south. We are now forced to purchase a new call processor >$500 or move our solution to asterisk. (Which is up and running and have been tested with Grandstream Adapters.) My question: Is there anyone out there that

I have a UIP200 on the way for eval. Does anyone have tips or tricks to get it working right away with * ? I hate having to go through the pain someone else braver than I went through already. :) Tim --

Looking for someone with a successful experience similar to this; I have a need to cross connect a 3COM NBX PBX PRI interface to asterisk, but over a long distance. We do not need any IP connectivity and the solution requires G.711u audio so there is no benefit to using IP. Has anyone here successfully cross connected any PBX PRI interface expecting NI2 PRI signaling B8ZS/ESF with an

Hi, I would like to simulate data with a binary outcome and a set of predictors that are correlated. I want to be able to fix the number of event (Y=1) vs. non-event (Y=0). Thus, I fix this and then simulate the predictors. I have 2 questions: 1. When the predictors are continuous, I can use mvrnorm(). However, if I have continuous, ordinal and binary predictors, I'm not sure how to simulate

Salve, Imagine ogg vorbis is used to produce radio with free software. A journalist would produce a report end send it with 24kBit/s out from a cricis place somewhere in the world. DRM is going to use MP4 - so his report has to be reconverted with loosing quality :-( Can you imagine to have an free codec someday that would work in embedded radio-reciver like MP4? If yes, should DRM not be open

Good Morning, I'm thinking about buying the asterisk six-months online course, Have somebody here that bought that course? What is your opinion? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110606/3008703d/attachment.htm>

It would be a real kick to get one of these to run Asterisk. :) http://www.gumstix.com/ Tim -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< >>

Greetings all, I am interested in setting up a lab in my house to run my home phone system. Can some one point me in the right direction hardware wise for achieving this goal? I happen to have a few 3com NBX phones, and have been told that they are SIP compliant but am not exactly sure if I believe 3com...I would be interested to know if anyone has these things working on *. In any

Folks, It seems like the * v 0.9 and iaxcomm won't speak to each other. Is there another IAX2 client that is usable under Linux (Debian preferred)? Thanks, Tim --

Folks, I'm looking for a SIP or IAX phone for field techs to take with them when out on service calls. The regular desktop phones are just way too big. Is there anything like the size of a full-sized cell phone? Or smaller, not I doubt that... Tim --

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've searched the mailing list quite extensively, but didn't come up with anything promising (some things wer helpful, though). Does anyone know if Nortel M Series (specifically the 2008, 2616, 7208, and 7310) phones can be made to work with the TDM400P card or if they are ADSI compatible at all? I kind of doubt they will work if they are