similar to: Inter-digit minimum

Anyone have a suggestion on where I can get a decent new MB with 5v capable PCI slots. It seems like every decent server MB on the market has 3.3V slots only. Is diving into the junkbin my only choice if I can't afford to replace the 5v quad-T1 wildcard? Thanks Mark Farver

I've got a new setup (different building) where Asterisk is sitting between the PBX and phone company on a E&M T1 line. Mitel PBX <-> Asterisk <-> Phone company Inbound works. Asterisk gets the in-band digits from the phone company and hands the call off to the Mitel just fine. Outbound is weird. Asterisk seems to expect that the mitel will send routing information

I have a pair of sites tied together with a T1 line running zaptel PPP on either end. The system works, but I keep getting these messages in the kernel logs, and users are reporting connection problems (TCP timeouts, and hangs) especially under high usage. --snip-- HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) HDLC

Our setup is: 9.6k Modem <-analog-> Mitel SX-200 <-(pri)-> Asterisk <-(pri) -> Telco The modem works fine with the Mitel directly connected to the Telco, but once we add Asterisk in between connections start failing. I suspect the issue is caused by the echo canceller, since I believe the issue appear about the time we turned echo cancellation on (for the IAX users). We

So I reached the point where my PRI is accepting incoming calls, but I cannot dialout. I must be doing something stupid, but I can't figure it out. The Asterisk box is sitting between the Mitel and the phone company, and has PRI lines to each. Asterisk was built from CVS r1-0 Log for a call from mitel heading outbound: ------------------------- -- Accepting call from '' to

I need to check if a parameter is set so that I can build some information for my application, but No matter how I format my if statement in the file " Application.rb" it return the following error. You have a nil object when you didn''t expect it! You might have expected an instance of Array. The error occurred while evaluating nil.[] Here is the line if params[:day] So we

Is there something special that needs to be done to allow a T100P/T400 to respond to a remote loop request? I am having some issues with a Point to point T1 line using zaptel ppp. This line gave us small problems when we had a pair of Cisco 2600's on either end but now with the zaptel ppp it is going down every couple of minutes for 15 intervals. The phone company says the line is good to

Dear R experts, I'm hoping someone can help me to interpret the results of building gam's with mgcv in R. Below are summaries of two gam's based on the same dataset. The first gam (named "gam.mod") has six predictor variables. The second gam (named "gam.mod2") is exactly the same except it is missing one of the predictor variables. What is confusing me is

I'm connecting to an NEC t1 card via t100p (working great so far!) however I'm having problems dialing from the NEC system to an asterisk extension (sip-grandstream). If I hit the trunck line and dial REAL quick 103 I get the sip extension ringing; if I don't I get an invalad selection message from asterisk - and I can see on the console only one or two digits arrived. How can I

Consider this dialplan fragment, where the call is being dialed into [macro-process-routing] over an iax2 channel from another (same build) Asterisk server: [macro-process-routing] ; This is the entrypoint of the debug call but is also refered to by Macro(process-routing) elsewhere in the dialplan ; XXX-NNN-6800 exten => _6800,1,Macro(6800-interceptor) ; This is matched when 8 is

It appears that my X100P card is only answering after two rings. Ideally, I'd like it to answer on the first ring. Here is the incoming section of my extensions.conf file: [incoming] exten => s,1,Answer exten => s,2,BackGround(demo-congrats) ; Play a congratulatory message exten => 1234,1,Goto(jgunther,1234,1) exten => 4321,1,Goto(mgunther,4321,1) exten =>

Hi, I am using * to guide my callers throught my company's support menu. But I have problem when the caller has a "pulse dial" telephony. Could * detect digits dialed on pulse telephones? Daniel

Hi, I have a little situation with my dialplan, and I am wondering if what I want is even possible. Here it is: I have three contexts, context1 includes contexts2, and context2 includes context3. In other words, in context1 all extensions of context2 and context3 are valid (and actually working, so that's good). I am using those context for the sake of code clarity and reuse, and for

I'm running samba on an AIX 4.3.3 server which has NT4.0 SP6a clients connecting. Since I've had so much trouble with it I compiled 2.2.4 with GCC on the server and it didn't do any good. Grasping for straws I had our netadmin come over and help me interpet what kinds of errors we were receiving. The symptom of the problem first off is that when the clients are browsing the

Greetings, Below is part of the contents of my extensions.conf file. exten => s,1,Wait,1 ; Wait a second before answering. exten => s,2,Answer exten => s,3,ResponseTimeout,10 ; Set the amount of time the user ; has to make a selection. exten => s,4,DigitTimeout,5

Okay, I see that there is no way to shorten the inter-digit delay when we dial out DTMF. The reason I need this is because when dialing a two-stage call, the PDD can be shortened dramatically while still working fine, and that opens whole new world of business. But many people confused dialing-out with receiving DTMF, which is not what we are concerned with. If it is impossible to configure the

I must be doing something stupid, but I can't figure it out. I have three PRI lines connected to Asterisk, one from the phone company, and two more connected to PBXs. Asterisk uses the incoming DID information to decide which PBX to route the call to. Should be simple. Asterisk is clearly getting the caller id info from the phone company: -- Accepting call from '512345xxxx'

Hello all- So I have * up and running and connected to a legacy system via em_w lines and have no trouble dialing from * through the tie line but from the PBX across the tie line I am having intermittant receipt of the DTMF. T-Berd testing is showing that the digits are coming across but * is either missing the first digit consistantly. This seems to me to have something to do with start timers

On 29/10/2019 13:59, L.P.H. van Belle via samba wrote: > Hai, > > Personaly, i agree with Todd, having a few clear examples with the samba versionnumbering in it. > > How about, adding a sub page in : > https://wiki.samba.org/index.php/Configure_Samba_to_Work_Better_with_Mac_OS_X > > With something like a section that shows : "User contributed examples" > >

Howdy, 1 x TDM400P card with 1 x fxo module. 1 x BT Pots line. Location - UK Calls work fine outbound but i'm unable to pickup the inbound calls. Asterisk debug: Asterisk -vvvvvvvvvvcg *CLI> -- Starting simple switch on 'Zap/1-1' -- Executing Wait("Zap/1-1", "1") in new stack -- Executing Answer("Zap/1-1", "") in new stack