similar to: chan_sip and budgetone

Dear List, I've been looking tirelessly for a solution to this dilemma but without success. Perhaps someone has an idea that will guide me in the right direction. Suppose I have the following data.frame: DF = data.frame(X = c(114.5508, 114.6468, 114.6596, 114.6957, 114.6828, 114.8903, 114.9519, 114.8842, 114.8579, 114.8489), Y = c(47.14094, 46.98874, 46.91235, 46.88265, 46.80584, 46.67022,

Here is the diff from chan_sip.c 15 days ago and 16 days ago. 15 days ago is the point outgoing calls made via grandstream budgetone stopped working. Any help on why it breaks? Any possible fix? /tmp# diff asterisk/channels/chan_sip.c asterisk.works/channels/chan_sip.c 289d288 < int capability; 3921,3922d3919 < p->capability = user->capability;

The dtrace(1M) manpage seems to be incorrect, it states: -32 | -64 The D compiler produces programs using the native data model of the operating system kernel. You can use the isainfo -b command to determine the current operating system data model. If the -32 option is specified, dtrace forces the D compiler to compile a D

I'm using 1 BudgeTone 100 IP Phone and a Sipura 2000 for all my old analog phones. The analog phones with the Sipura seem to work great. Voice quality is fine on both ends on the Sipura. I'm using the Teliax service and I use the Ulaw codec for all phones. However, I'm struggling with the BudgeTone 100. On my end, I find there is lot's of voice cut outs. I'm told my

I am setting up a small Asterisk system for use at home. I have one Budgetone 101, one Cisco 7960 and two Xten lite softphones. So far everything is working expect for an issue with the Budgetone. When a call is placed between the Budgetone and any other phone, the call is setup and sounds good. If I hang-up on the Budgetone, everything is ok. If I hang up on the other phone, the Budgetone

Does anyone know what the Grandstream Budgetone is going for $$$ in the US? I didn't immediately see pricing on the phones page. AJ

Just for the record and to possibly help with others who get BudgeTone phones. My asterisk box is behind NAT, and I use Vonage, NuFone, and iconnecthere for my "POTS backhaul." On the front end I have an ATA186, a Digium TDM20, and now a BudgeTone 102. The BudgeTone definitely has issues wrt the RTP stream and NATting, although unfortunately I haven't yet been able to dig

Hi, I'm considering giving the Grandstream BudgeTone-102 phones a try. I've been using Cisco 7960's to date, but the low cost of the Grandstream phones are hard to ignore. I have two questions: 1) Does the message waiting indicator on the BudgeTone's work with Asterisk? 2) The one line 12-digit LDC concerns me a bit. Is the LCD able to display both the CID number and name on

I noticed that the BudgeTone (I have the 102) with the latest firmware tries to download a file called cfg.txt (presumably the configuration) and a file called ring.bin (presumably a ringer) from the tftp server. The ring-in sound on the budgetone is the same as the ring-out sound and that is going to be confusing for users. I contacted GrandStream and was informed that both of these formats are

I have a strange problem in that I have put a budgetone out on the internet that connects to my * server that's behind a firewall. They can call me I can call them and it works fine. However, I have setup a link to sipdiscount on my * server. If the budgetone user calls via my * box to sipdiscount all the budgetone user hears is silence and the called person hears silence as well when they

Hi, Just playing with a couple of Budgetone 102 phones and they are pretty good for the price. The only problem i'm having at the moment is when I get a voicemail on the Asterisk box the LCD flashes. Dialing *98 goes to the VoiceMail Manager, and asks for mailbox, I enter 201, then asks for password, enter my voicemail password set in the Extensions -> webadmin, then hit the

Hello guys, I ask you to share your experience with your BudgeTone 100.... I have my asterisk @ work and I've bought a GrandStream BudgeTone (SIP phone) and I usually use X-Lite I have plugged my BudgeTone into my home network because I want to be called even at home. I succeed to register my X-Lite with Asterisk from home but I can't do that with my BudgeTone. (I don't know

Hi. I was wondering if there's a way to do supervised transfers on the budgetone 102 . Blind works ok, but can't do supervised. I thought that with the flash button that could be possible, but seems I'm wrong .... matteo.

I have found that the NTP server is not contacted when the phone (Budgetone 100) comes back from a power down. I must reboot the phone without powering down to get the phone to contact the NTP server for the time. It doesn't matter whether I reboot from the phone's web site or using the menu reset function: either works. I have only tested this with a private NTP server. This may

I inadvertently unplugged my Budgetone phone tonight and I think it went out and upgraded its firmware. It is now at 1.0.3.81. Does anyone know how new this might be? Suddenly things that have been working wonderfully before don't work--basically it seems to do the SIP stuff just fine but then all the RTP stuff breaks, even something as simple as retrieving my voicemail from a server on

Hi I am setting up an Asterisk System in an office environment, Incoming and Outgoing calls are working ok, but i am having a few strange problems regarding call waiting. With the SNOM 200 (firmware 2.02t) phones, if you are on a call and a 2nd call comes in, the call waiting beep is played and the light flashes, but if you hang up the 1st call, instead of the phone ringing, it connects the

Hey guys, I have a problem with my BudgeTone. It ignores calls after being online with my asterisk server for an extended period of time. I know this problem has been posted on this list before. Honestly, I searched the archives but couldn't find the previous posts. Was there ever a solution to this problem ? My firmware version is the latest: 1.0.5.11. Once again, I apologize for posting

Hi Folks, Since there isn't a grandstream forum AFAIK I guess someone here may be able to shed some light on this. Apologies if this is viewed as offtopic.. I think I may have killed the firmware on my Grandstream Budgetone 101. I found a source for the 1.0.5.30 firmware and made the files available over tftp. The phone downloaded the files but now doesn't boot and hangs with a blank

Hello, I have been working on getting Asterisk up and running with a couple Grandstream hard phones (Budgetone 100s) and a couple softphones. Things work pretty well but we have discovered an odd problem. A calls B and then A can put the call on hold and pick it back up. A calls B and B can put the call on hold but cannot pick it back up. These tests are internal on the hard phones. The

Hello to all. I have a couple of budgetones connected to Asterisk server. I can establish calls using budgetone with no problem, but when I hang up a Budgetone, Asterisk does not detect the hangup. It seems that the communication goes on in spite of budgetone's hangup. My sip.conf: [general] disallow=all allow=ulaw bindaddr=172.16.60.21 [sip1] callgroup=1 pickupgroup=1 type=friend