similar to: Beginners help

Hi, First of all, I'm new to ocfs2 and drbd. I set up two identical servers (Athlon64, 1GB RAM, GB-Ethernet) with Debian Etch, compiled my own kernel (2.6.16.20), then compiled the drbd-modules and ocfs (modules and tools) from source. The process of getting everything up and running was very easy. I have one big 140GB partition that is synced with drbd (in c-mode) and has an ocfs2

Has anyone installed Linux (CentOS or other) on a Tyan K8SE (S2892) motherboard? I'd really like to hear your experiences -- with this board or Nvidia's nForce Pro chipset in general. I'm looking to build a new server using this board but would like to find some other experiences first. I've googled myself blue but haven't found any reviews or postings regarding this

Me again. The ASUS P5N32-SLI motherboard in my new machine has dual NICs but CentOS has only detected one of them. I've tried rebooting with the network plugged in only to the second one, but kudzu still doesn't find it. Any suggestions?

When using 4.4 to install on gigabyte GA-M51GM-S2 motherboard basically an Nforce 410/430 chipset then network is not initially detect to perform a network install. It let me attempt to manually select a driver but I do not see the driver in the list. After installing the network works and the forcedeth driver is loaded. Is there a way to get this driver detected or manually loaded? THanks,

I'm trying to figure out how to start *..... Rh7.3,CVS,TE410P,TA750 If I just try the way the docs spell it out "/usr/sbin/asterisk -vvvc" it fails...... /var/log/asterisk/messages Oct 3 22:23:34 WARNING[1024]: File chan_zap.c, Line 610 (zt_open): Unable to open '/dev/zap/channel': No such device Oct 3 22:23:34 ERROR[1024]: File chan_zap.c, Line 4930 (mkintf): Unable

Thanks again. This is the lsmod output: # lsmod aead 4256 0 arc4 1312 2 b43 324014 0 bcma 28621 1 b43, button_hotplug 2800 0 cfg80211 172273 2 b43,mac80211, cifs 190077 0 compat 651 3 b43,mac80211,cfg80211, crc16 1015 1 ext4, crc_ccitt

Does anyone keep a known telemarketer caller id database? If not has anyone proposed an Asterisk community project to share this information? Sort of a nation wide blacklist so Asterisk'ers can cut down on the garbage calls... -------------- next part -------------- An HTML attachment was scrubbed... URL:

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=339 ------- Additional Comments From scrizt@ludd.ltu.se 2006-06-26 17:57 MET ------- Is this bug forgotten ? Anyhow, I ran into it when setting up this strange network of mine.. I dont think my setup is causing anything strange however.. It appears even if no machine is connected to the "inner" port of the bridge.. I

Thanks in advance root@asterisk01:~# modprobe wcfxo /lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device /lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o

Either it is not loaded, or the usb serial and/or hid drivers are not loaded, which appear to have been used on your Debian box. - Tim On February 24, 2014 1:12:36 AM CST, Josu Lazkano <josu.lazkano at gmail.com> wrote: >Thanks again. > >This is the lsmod output: > ># lsmod >aead 4256 0 >arc4 1312 2 >b43

Ive had two of them in the last two weeks.. The most recent kernel output is kernel: Unable to handle kernel NULL pointer dereference at virtual address 0000009c kernel: printing eip: kernel: c88132b4 kernel: *pde = 00000000 kernel: Oops: 0000 kernel: ppp_async ppp_generic slhc 3c509 8139too mii ipt_state ipt_LOG ipt_REJECT ipt_ kernel: CPU: 0 kernel: EIP: 0010:[<c88132b4>] Not

Hi, The following error message appeared in syslog while the filesharing client overnet was running and writing to the disk. I first only noticed that suddenly Opera was frozen and no new terminals could be started. Regards W. Pichler syslog Jun 15 13:15:34 pc kernel: Unable to handle kernel NULL pointer dereference at virtual address 0000000e Jun 15 13:15:34 pc kernel: printing eip: Jun

Hello, I have a computer with this sound card (from lspci): 0000:01:04.0 Multimedia audio controller: Creative Labs SB Audigy LS Alsa is installed (maybe not properly...) # cat /proc/asound/cards 0 [CA0106 ]: CA0106 - CA0106 Live! 7.1 24bit [SB0410] at 0xc800 irq 10 But I have the impression alsa is ok : :~# aplay -l **** List of PLAYBACK Hardware Devices **** card

Hi all I ahve been having problems loading the wcfss and wcfxo drivers I get an error message invalid argument and something about post install insmod failed the currently load modules do show the drivers loaded but asteris won't start lsmod root@slackware:~# lsmod Module Size Used by Not tainted soundcore 3332 0 (autoclean) wcfxo

hi guys... im a new asterisk user. i dont understand why asterisk doesnt start. pls take a look at the output below. i could start it a couple of times .. #asterisk -gc Asterisk CVS-v1-0-01/21/05-14:58:31, Copyright (C) 1999-2004 Digium. Written by Mark Spencer <markster@digium.com> ========================================================================= [ Booting....................Jan

Hello I have installed a TDM04B and disabled any devices not required in my PC. (TDM04B is analog card with 4 ports to plug into telephone co lines). I am running this version of * Asterisk CVS-HEAD-01/10/05-02:11:15-AstLinux built by root@ls on a i686 running Linux As you see below the wctdm module is loaded: pbx root # lsmod Module Size Used by binfmt_misc 12296 1 - Live

Hello all, I've got a T100P connected to an Adtran TA750 with a T1 crossover... This connects to a patch panel with phone ports. The Adtran is fully populated with FXS cards. All I get on any phone port is a fast clicking noise... No dialtone. Asterisk 'sees' the card, (the channels show up in /proc/zaptel). Incoming calls are routed to the zap/x channel, but no ring. I'm

Hi Everybody, I''m a using xen for my first time in a debian sarge using the testing repository of Xen. I have the following problem: When boot with kernel 2.6.11-ksxen0, after a day or some running, the X crash and then the machine reboots. Will it''s running i''m seeing this erros on dmesg: [drm:i830_wait_ring] *ERROR* space: 131056 wanted 131064 [drm:i830_wait_ring]

Hello Since TDM cards are known for being particular when it comes to motherboards (PCI 2.2, etc.), I was wondering if there is a utility that can check that the Zaptel driver works OK and can tell if the TDM card is compatible? That way, if an FXO module is not reporting an incoming call, we'd know it's because of the Zaptel driver, and not something elsewhere. Are "dmesg",

Hi. I am trying to setup my firewall in DomU. However, I have got a little problem. My pon dsl-provider exits with following message. Nov 18 09:44:40 alsfw01 pppd[1723]: Plugin rp-pppoe.so loaded. Nov 18 09:44:40 alsfw01 pppd[1723]: Linux kernel does not support PPPoE -- are you running 2.4.x? Nov 18 09:44:40 alsfw01 pppd[1723]: Exit. I am running xen out of the box on Debian Stable. My