similar to: recording calls

Sorry that got accidentally sent incompleted, here's the full post: OK, here is the long drawn out description of how I am using Zap Barge and Monitor: Zapbarge(listen in on live calls): Very simple actually I just added this to my dial plan(extensions.conf): ; barge monitoring extension exten => 8159,1,ZapBarge exten => 8159,2,Hangup Then when you dial 8159 on

Would anyone mind sending me a working set of config files for asterisk and their softphone settings? I am really looking for very basic setup stuff as I just want to show that the system works to my management before they will allow me to spend the money on phones and a telco card. Server is a redhat 7.3 w/ 512 RAM and dual 550's. Asterisk tar ball has been laid down, configured, make,

I have a couple of questions on the zapbarge: 1) zapbarge asks for a channel - how would a manager know what channel to enter ? Is there any way of being able to enter an extension number instead ? I know that you can get the information from the manager interface, but I wouldn't want to give my users access to this, or have to install / write a system just to get an extension number from a

Hi I have looked through the wiki and search the mailing list, but I cannot find a way to intrude on a call, can asterisk do this feature? if so how? Thanks for your help Robb

Hi All Can anybody help me for dial plan to barge or Spy(ExtenSpy) specificor selective extemsions among 20 extension in my office. lets say my office extension range is 301-320 & i want to barge only 3 extension say 320, 302,314. is this possible to barge specific extension? . Plz help me for this.I am using Asterisk 1.4.9 & SIP channels. Regards Amit -------------- next

I'm curious (ok, well I admit it - it's for perosnal gain) what methods people are using to manage asterisk config files when they have multiple asterisk systems? Some sort of revision control such as cvs,rcs or subversion? A central 'config server' where you edit the files and then rsync them out? I have 5 systems to manage, and it seems that about the only common file is

Hello, I've search through all of the lists and cannot find any descriptions of live monitoring (monitoring a phone call going on between an extension and a zaptel channel live from another extension while the monitoring phone is muted). I am aware of the monitor function which is actually a call recorder, but I'm looking for live monitoring from a muted extension. is this easily

> -----Original Message----- > From: Richard Lyman [mailto:pchammer@dynx.net] > Sent: Wednesday, December 20, 2006 4:29 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Re: Match a Numer - then continue with, > dialplan > > > Douglas Garstang wrote: > >> -----Original Message----- > >> From: David

I've set up asterisk with my X100P as a home answering machine. Works great so far - answers the phone after 20 seconds, runs the phone tree, emails voicemail, etc. However, the one feature traditional answering machines have that I haven't been able to figure out is how to listen in on the call. Ideally I could just route through Console/dsp and hear it on my speakers. I've tried

I'm setting up a new AAH 1.0 box to replace my AAH 0.6 box. Though on the new box, I've installed a generic ebay X100P. I don't have my livevoip or voicepulse accounts set up yet on the new box (can both boxes be registered at the same time?). I've set up one IP phone (SPA841) with the new box. I have my SBC POTS line plugged into the fxo card. I set up everything in AMP.

> -----Original Message----- > From: David Gomillion [mailto:dgomillion@eyecarenow.com] > Sent: Wednesday, December 20, 2006 10:27 AM > To: asterisk-users@lists.digium.com > Subject: [asterisk-users] Re: Match a Numer - then continue with, > dialplan > > > I think you're making it far too difficult. > > What I do is something like this: > > [outgoing]

I am looking for a large number (probably about 100 or so) low-cost phones that I can hang on the wall. I need the phones to use PoE. Do the Uniden phones support wall-mounting? These phones are not going to be high-usage; they simply need to be there in case of an emergency. Another question, along the same kind of lines, has anyone figured out how to keep the SoundPoint IP 600 receiver

I have a new user question. Sorry I know most of you are Linux experts I am not! I am just getting my feet wet with this. And I am sorry to ask this stupid question. I was following an installation post from Wiki that said when using RH 9 you need to make sure that you have the following installed first and you should check them with the following command. Are there any other items I need to

I am currently working on an Asterisk test system, and will be presenting a demo to the Board of Directors tomorrow night. I want to make sure I have all of my ducks in a row. The Asterisk system will be used to replace a Norstar MICS. The location has two PRI's coming in, with a few hundred DIDs. I know how to make * use the DIDs incoming, and I know how Nortel uses the DIDs. Now for the

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 2730 bytes Desc: image001.gif Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040113/2fec80ee/attachment.gif

Hi, Is it possible to host call waiting service on Asterisk for a SIP device? What i am trying to achieve is that while a SIP user is busy on a call and a new call for that user comes in, asterisk should play the call waiting tone to that user. I have a vague idea that if i can get hold of the existing bridged channel when a subsequent call is received, i can then redirect that channel to

Problem: Polycom SoundPoint IP phones (running SIP) ceases to send DTMF that Asterisk can detect and use. It worked in 1.0.5, but has not worked since. This has been verified on SoundPoint IP 300's and SoundPoint IP 600's. Workaround: It used to be that for DTMF to work, I had to set the mode in sip.conf to "inband". Without making any configuration changes on the

Hi, we're running Asterisk 1.2.10 and have been randomly being left blank voicemails with long messages that we can't hear. I've searched and searched but cannot find a solution. This is what happens: Internal Server runs Asterisk 1.2.10 where our mailboxes are Incoming Server (behind a firewall) runs Asterisk 1.2.13 and calls are bridged between this server and our internal server.

Hi, I am trying to change the dialplan to enable call recording (incoming and outgoing calls) on the "click of a button". Is it possible? All the documentation I found so far, enable recording for 'all calls' to an extension. Does this code look ok? Currently Recording "on" only for 1030 when user presses *44, start recording. *55 to stop recording

Okay...here's one for all of you.... 3 party meet-me conference: Call 1: Comes in to MyAsterisk on an E1 PRI into the system. All TDM, no VoIP at all involved. No echo at all. Call 2: Call comes in via IAX....(TDM -> Asterisk_1 -> IAX/GSM -> MyAsterisk. Caller immediately hears his own echo Call 3: Call comes in via IAX....(TDM -> Asterisk_1 -> IAX/GSM -> MyAsterisk.