similar to: *, Fritz!PCI and strange behavior

Displaying 20 results from an estimated 4000 matches similar to: "*, Fritz!PCI and strange behavior"

2005 Jun 28
1
cheap HFC card on Bristuff vs cheap HFC card on i4l vs Fritz ISDN BRI card on CAPI
Hello I have asterisk running in Red Hat 9 with a cheap HFC card on i4l. I have choppy sound problems sometimes, and echo problems often. I am using a 2 port Grandstream ATA, Grandstream BT and a Grandstream GPX-2000 I read that changing to BriStuff will fix the echo problems, but have also read other users say that the only way they solved the echo/choppy sound problems was using a Fritz ISDN
2003 Nov 17
1
Updated Asterisk-NL
I have updated the voice prompts (mostly small fixes, but still work left to be done - however, it's usable now, I'd say) and the patch file (to current CVS) for Asterisk-in-Dutch. As far as I can tell, all of the grammar work is now in - if anyone has feedback to share, please do so before I spend lots of time cleaning up the patches so they can be integrated back.
2003 Nov 10
0
Asterisk in Dutch
I have just completed a set of voice files in Dutch, plus a patch that forces Asterisk to sane (i.e. Dutch ;-)) behaviour when composing dates, times, numbers, etcetera. The current release, 0.0.1, is a sort of pre-release - some known issues have been identified, but I nevertheless would like to have some feedback so we can do a minimum number of polishing rounds. The patch is a bit
2004 Jan 07
1
Re: 911 and lawsuits and redundancy
I have also noticed that sip.conf doesnt get updated without a restart..... was thinking I am doing something wrong, but maybe not now...... Chris -----Original Message----- From: Jonathan Moore [mailto:moorejon@usd465.com] Sent: Thursday, 8 January 2004 8:42 AM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Re: 911 and lawsuits and redundancy Another concern I have on this
2003 Nov 19
1
fritz pci / chan_capi / australia setup
Hi * Fans, I have some fritz cards now, followed instructions from stuart hirsts email of Jun 28: -> Thanks for your info but I think I have it working at last. Below are the steps I took which might help others. 1) Download the PCI AVM drivers from ftp://ftp.avm.de/cardware 2) Download the Chan_capi from http://www.junghanns.net/asterisk/ 3) tar -xvzf fcpci-suse8.0-03.09.10.tar.gz which
2003 Jul 17
4
AVM Fritz! to connect LAN with ISDN line?
Hello, Is it possible to use * as a gateway in the following setup: LAN (with Windows NT/Linux PCs) | Ethernet (IP) | Linux PC with * and AVM Fritz! ISDN Adapter | ISDN | Someone with a analog/digital phone (POTS) Basically, people sitting on their PCs will wear a headset, and whenever they want to call someone,
2005 Sep 10
4
Fritz, mISDN, Help
A plea to all! Has anyone had any success with two or more avm fritz pci cards with either misdn, chan_misdn, or chan_capi, and any version of linux 2.6.x? I have managed to get misdn to load under 2.6.13 and detect two cards using misdn-capi and chan-capi (using capiinfo and capi info under asterisk) - but the second card/controller doesn't answer or dial calls. But if I try misdn
2003 May 27
1
Kernel Version for CAPI AVM Fritz PCI V2 / chan_capi / chan_alsa update to latest version..
Hello there I have a serious issue with the AVM Fritz PCI V2 I have the following setup and the problem is, that the kernel freezes hard after about 16 hours. The second problem is, that the S-Bus gets jammed as well, so you can't even use a analog phone! on the NT Kernel 2.4.21rc2 with ACPI Patch and of course capi are there any reasons why this configuration should not work? And the
2004 Apr 08
2
Réf. : Re: Fritz ISDN PCI v2 and CAPI
I tried that but it still doesn't work... I think I don't have the correct approach. Have I to install any ISDN drivers (=modules ?) BEFORE dealing with CAPI ? If yes, why shouldn't I use the hisax drivers (which are kernel ones) instead of fcpci drivers (which doesn't seems to work, by the way...) And finally, how is it possible to link the two modules together? As you can see,
2005 Oct 10
2
AVM Fritz! + chan_capi + mISDN + PTP
Hello everyone, I have been using an AVM Fritz! card with chan_capi and mISDN for quite a while in PTM mode and it was working finely. Now, I needed more DID/MSN, so I switched to PTP. But now nothing works anymore :( I am using Asterisk on Debian Sarge stable and installed Asterisk along with chan_capi from apt-get. I installed mISDN from the CVS of isdn4linux.de. It is : - Asterisk
2005 Mar 28
1
Kernel panic loading second fritz card
Hi Everyone, Long time reader, first time poster. FINALLY got my First AVM Fritz Card up and running under Centos 3.4 Installed the second....modified the drivers etc as per the instructions found at the wiki System boots Modprobe capi all good modprobe fcpci all good modprobe f2pci the kernel then goes into Panic If Modprobe f2pci before fcpci the kernel still goes into panic.
2005 Feb 07
2
2 x Fritz!pci card
Hello, Has anybody installed 2 Fritz pci cards in an asterisk box ? I can't make them work : each card is working fine when installed alone (with chan_capi), but I get a kernel freeze when doing 'insmod' with both cards installed. I am using Mandrake 10.1 with kernel 2.6, so the hack described at http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO cannot be used (the hack requires
2005 Jul 15
2
seems-to-be-inexpensive source of polycom 301 and501
i have ordered 500s from tritechcoa.com several times over the past 4 months. great service and delivery, and the prices are lowish, only problem is, they add a $20 handling fee per phone, on top of phone price, and shipping, making the lower price not as good -----Original Message----- From: Mojo with Horan & Company, LLC [mailto:mojo@horanappraisals.com] Sent: Friday, July 15, 2005 12:01
2005 Jul 25
4
Fritz PCI card in ptp mode with chan_misdn
Hello ! I would like to get working a Fritz PCI card using chan_misdn operating in ptp mode. Afer compiling mISDN into the kernel and building chan_misdn Asterisk stops loading with : [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri)) == Parsing '/etc/asterisk/misdn.conf': Found UnLocking config_mutex == Registered channel type 'mISDN' (This driver enables
2006 Jun 29
4
Very bad quality with AVM Fritz!card PCI and chan_capi
Hi everyone, I have Asterisk SVN-trunk-r7498 running for a few months and I'm quite happy with it. However, I am experiencing a quality issue with my AVM Fritz!card PCI which is used with chan_capi. When somebody calls me on this line he hears a lot of noise and I hear "scratches" and "plops". It is very annoying. Below is is my /etc/asterisk/capi.conf I've tried to
2004 Sep 21
1
HELP on AVM Fritz with CAPI drivers for SMP RH 9
Hello, I have been wrestling with installing the CAPI drivers for AVM Fritz in order to use chan_capi with Asterisk. I use an SMP machine, RH 9. I have found rpm's for CAPI and AVM drivers (namely: capi4k-utils-2003.06.16-08.mungo.RH9.i686.rpm and kernel-2.4.20-8- avmfcpci-03.11.02-08.mungo.RH9.i686.rpm), but I believe that they support only single processor machines. I've already
2010 Mar 01
1
AVM Fritz! mISDN with Kernel 2.6.32 - Any experiences? - Email found in subject
Hi again! > I have excellent success with the tiny "fcpci" and chan_capi, which is > also working great with capi4hylafax. See > net-dialup/fcpci-0.1-r1 in gentoo (should not be difficult to use this > on other distros, but I have never done so). Do not confuse this with > the "fritzcapi"! I managed to install fcpci and it seems to run fine (capiinfo
2004 Apr 08
2
Fritz ISDN PCI v2 and CAPI
Hi, First, here is my config: Kernel version 2.4.25 on a Fedora distro, Asterisk and a Fritz! Isdn PCI Card (v2). I try to make the CAPI drivers deal with Asterisk but I can't try to figure out to get of this issue. As I see, Fritz modules are integrated with the kernel, so I directly loaded the 'hisax_fcpcipnp' module from it. I install also Capi modules by downloading archives of the
2006 Jan 17
3
Fritz card technology & German *
Hi all, I've been working with * for a long time now, but only with analog FXS/FXO systems. I am venturing towards setting up a box in Germany now and I believe that requires a Fritz card? Do I even have to use the Fritz cards? Why not a Digium card.... We have 2 ISDN lines ( --> 6 handsets) so I'm guessing that will require 2 Fritz PCI cards (they have 1 port only). Then
2010 Feb 25
1
AVM Fritz! mISDN with Kernel 2.6.32 - Any experiences?
Hi to all asterisk-users ;) As some of you may know, Kernel 2.6.32 includes a module for the infamous Fritz passive ISDN cards in conjunction with mISDN. I just would like to know if anybody has tried to use a Fritz card as a BRI adapter for Asterisk with the new module. If so, i would be grateful for some hints or howtos. I am willing to try this myself, but i am quite reluctant as i have