similar to: Questions from a total beginner

Hi all, We have put together a firmware for a range of inexpensive routers. It has been configured to provide optimum VoIP performance. We have internally tested it for number of months and it looks very good. You should be able to run it easily with 20+ phones on local network ( we still did not hit the upper limit ) assuming that you have bandwidth. Your VoIP will get prioritized over other

Hi folks. Please don't flame me but I've been googling around for days, read a tremendous amount, tried everything, and still no go. This is most definitely a typical newbie question. - I sure hope there's somebody(s) out there who'll humble themselves to help me out. I've set up an 'out of the box' basic Asterisk server running on Slackware Linux. - It basically

Hello to everybody, does anybody knows how to install Asterisk on a Linksys WRT54G(S)? I had read in the Wiki that it is possible. If somebody has a tip, this would help me very much. Regards Bastian

First off, I'm sorry for sending so many messages to the list-serv. Hopefully this will be my last for a while! I was going to use my WRT54G router as a small Asterisk box, but I forgot that I had a spare eMachines computer (Intel Celeron 633 MHz, 20GB HD, 64mb RAM). Will this machine work OK for a very simple dedicated home Asterisk box? Also, what is easiest linux distribution to use and

Is it possible to set up a non-forwarding bridge? I have two interfaces that I'd like to combine, where one is a fast main link and the other is a slower backup. I'd like traffic to go out the fast link only, if it is available, and failover to the backup if it is not available. I never want to forward packets between the interfaces. My specific setup is a laptop with a 100M ethernet and

Hello, I am not able to open the web interface for the wrt54g router on the lan. Which port does it use ? Thanks Varun

Ok, I've done some more research and I don't think I want an FXO box... What I'd like to do is use BroadVoice (with their BYOD plan) and then run Asterisk on my WRT54G router. I'd also like to use my regular home phones without having to use a special "SIP" phone... (eg. I like my Vtech normal cordless phones) What do I need to buy to get this working? It sounds like I

Hello all, I have my * server setup behind a Linksys WRT54G on Adelphia cable. I have forwarded 5060,10000-10020, and another port set can't remember off the top of my head but I can't seem to connect to the * server from any locations that are direct connects to the Internet. Am I missing a portset for forwarding? If I use the name service (voip.*****.com) from my home connection on the

Hi all, Any one tried installing Asterisk on Linksys WRT54G? We have but facing problems with SIP to SIP calls. The phones ring and calls are established but we cannot hear any voice at all. I tried allow=all in the general section but did not work. So I forced ulaw. Can any one please check it out and let me know what is wrong? Here are the conf files: Asterisk Version: Asterisk

Hi, We're installing an * box next week (pbxtra from fonality) and I'm trying to come up with a solution for remote users that want a phone in their home. I need VPN and QoS capability, wireless support would be a nice to have. Ethernet handoff is fine, i don't need integrated dsl or cable modem... I've been googling and cruising the list and can find bits and pieces

Hello All, I would be grateful for some help with this issue. I have gotten Asterisk to work with Broadvoice on outgoing calls only. When I try to call my Broadvoice number from another location I get a caller is busy message. My Asterisk box is behind a Linksys WRT54G. Could this be the problem? On the Linksys, I have port 5060 forwarded to the asterisk box 192.168.1.2. I have tried not

I'm trying to setup Asterisk on my Linksys WRT54G router and it appears to startup successfully (no errors) and it says it is listening on 0.0.0.0 port 5060, but I am unable to connect to it. I've tried "telnet localhost 5060" but it just says connection refused. I've also tried connecting from another machine on my network (eg. telnet 192.168.0.1 5060) but it also says

I'm looking for a recent asterisk package for the Linksys WRT54G. Has anyone know of a 1.2.X build for this box? Thanks, Frank

current setup SIP phone 192.168.1.30 --> linksys wrt54g sveasoft -- INTERNET -- (xl0) Firewall (xl2:172.16.0.50)--> (em1:172.16.0.101) Asterisk problem is RTP stream not oging trouhg from * to sip and vice versa. #1 and asterusk is pushing 192.168.1.30 back to linksys with 172 as return address.... or #2 asterisk trying to get back to me as 192.168 on public internet.. got

Hello. The procedure so that it works you can find in: http://www.voip-info.org/wiki-Convert+WAV+audio+files+for+use+in+Asteris k a the files .wav chmod 755 file.wav sox file.wav -r 8000 file.gsm resample -ql chmod 755 file.gsm in extensions.conf xxxx=> xxx,x,playback(file) Ing Javier Rios Ing de Proyectos 04167285748 212 2637246 /2637187 -----Original Message----- From:

Hello, I've been fighting one-way-audio issues with asterisk and SIP extensions for some time..., and I want to share with you my findings ;) My setup: * 1 ADSL router (Zyxel) * 1 Asterisk box with private IP, and interesting ports forwarded to it. * Several extensions, some local some remote The problem: * External extensions behind double nat don't get audio when they

Its slow :) It will give you some delays but it will not be noticeable (most voice files are 5-100kb, so it should be ok... But writing to them.. Not sure.. It should be ok as well I'm guessing as kernel will provide some caching (since you have G and not GS it has less ram, so maybe chaching is not an option) Best would be to get WL-500G. It has a USB port so you can plug a USB memory stick

Hi, I am attempting to set up some simple outbound shaping following the LARTC HOWTO. The HTB qdisc seems to work as the documentation says, but my filters don''t seem to be working. All of the packets go to the default queue regardless of what filters I set, it seems. (according to tc -s qdisc show) I am trying to get this working on my openwrt box (whiterussian rc6), but when

Hello everyone.... Searching the archives and google always comes up with entries regarding the "dyn" dns option in the 7960, but I can't find answers to my specific question.... My 7960 is connected via cable modem and is NAT'ed (everything is working fine). On the 7960 under SIP configuration\NAT Address I have the public IP of my cable connection. Comcast gives me a

It's really weird how many times thing break in threes. This time is was my wife's laptop, my router and a phone. Anyway... My network has a router and 2 computers; my F11 box with the samba server on it called steve and my wife's laptop now running Windows 7 called Kellie-PC. My old router was a Linksys WRT54G that I had flashed with DD-WRT. I was using DHCP and DNS masquerading in