similar to: LDAP/iptables

Hello, I have a webcam that I wish to view from the internet. It is a wireless linksys model with an ip address of 192.168.1.15. I have it set on port 8081, 192.168.1.15:8081. I am using the IP Masquerade HowTo script. Here's the rule I added to my firewall script: EXTIF="ppp0" INTIF="eth1" EXTIP="`$IFCONFIG $EXTIF | grep inet | cut -d : -f 2 | cut -d \ -f

Hi there. I have followed some documents found here and there, but do not have already success implementing a script using iptables and iproute. What I need is to send all traffic trough an ADSL line, but mail trough an expensive and slow DS0. The mail server lies on the PC acting also as firewall. I include the script. When using that I get some error messages (I found that the flush command

Hello, I'm trying to set up port forwarding in IPTABLES and so far it's working great from the internet, but when I attempt from my internal LAN using the External IP address, it fails. EXTIF="eth0" INTIF="eth1" EXTIP="xxx.xxx.xxx.xxx" INTNET="192.168.1.0/24" INTIP="192.168.1.1" PORTFWIP="192.168.1.13" >From the internet,

Hello. I'm moving from a very old Fedora Core 1 to CentOS 4.4, what a change!! Three year ago, I wrote some script (network related) and worked very well. Now, I can put into init.d by means of chkconfig and I restarted the system, but always hang when executing my srcipt (in my new centos 4.4). There a manual for making scripts for init.d? there is some new requirement by which it does not

I have a little home network with one Windows 98 PC and a pc running linux. My idea is that as soon as DSL is finally made available to my area (which I keep getting told will be real soon now) I want to route it through the linux box and up to the Windows PC, using IP masquerading, etc. At present I have samba enabled on the unix box which opens up several worthwhile conveniences to me:

ei tuka imam edin pf conf obache pravi mnogo nomera, kato se pusne parvoto koeto e dropva paketi, timeoutva po serverite i t.n.. i speed-a e mnogo baven, vijte ako nqkoi moje da otkrie generalna greshka da reply :) vapreki che ne e freebsd-specific :P ne sym go pisal az a i ne sam mnogo mnogo zapoznat s pf zatova ako nqkoi moje da pomogne e dobre doshyl :) btw moje i neshto ot tia opcii kato set

Hi all, I need a little help, i am studing htb to control user bandwidth (download/upload) and I made a script as below to test. I am testing using ttcp tool from by linux box to other linux (192.168.200.51). my box <---- Linux = more than 128kbit mybot -----> Linux = get 128kbit But I want to control both ways, what am I missing? script: EXTIF=eth0 INTIF=eth1 TC=/sbin/tc DOWN=128

I suppose a few questions pop up on this list about access Samba through a firewall. ?I have been very successful running Samba through a firewall, until today. ?I hit a stumbling block. I have a Linux Firewall with the public IP Address of 134.x.x.140 <it is not the exact ip address, but close>. ?I am using NAT and port forwarding to send traffic destined for 137, 138,139, and 445 for BOTH

Easy question here: I have a test network that looks like this (apologies for my lack of ascii skills): [hostc]---------------[Firewall]192.168.42.1 (EXTIF: eth0) /10.0.0.1 (INTIF: eth1) 192.168.42.10 (wan) |(lan) | +-------------[hosta] 10.0.0.10 (port 4242) | +-------------[hostb]

I'm trying to connect a sip call from sipgate to Asterisk A to Asterisk B. Both are behind NAT, but port forwarded. I get the connection, but no voice - either in or out. I can call on SIP from A to B (and from B to A). Do it all the time. Asterisk A receives SIP calls from Junction and Teliax. CLI on A looks right: == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 ==

Hi, still trying to understand one thing. I would definitely like to tell iptables to accept all packets coming from remote vpn only if they hit the $VIRTUALVPNINTERFACE. I tried -o ipsec0 but this is not working, looks like ipsec0 device doesn't exist or it is not recognized. I red on the Openswan users list, that Linux kernel 2.6 native ipsec don't create ipsec* interface (if I am

I have the following network: External Interface External Interface ccc.ccc.ccc.ccc aaa.aaa.aaa.aaa | | --> VPN <--> Internet <--> FreeBSD Client (NATed extip: bbb.bbb.bbb.bbb) | FW-1 Protected Net ddd.ddd.ddd.ddd/24 VPN: ipsec freeswan (UDP encapsulated tunnel) ccc.ccc.ccc.ccc has port 136/UDP open for

Does there exist a GUI Front End for OpenLDAP admin for CentOS 5 (RHEL 5)? The binary (i386) rpm for directory_adminstrator works just fine with CentOS 4, but does't install under CentOS 5 and the src RPM does not build (I hacked the spec file and did install the build deps, but it is using an old hack for finding libgnome (/usr/lib/gnomeConf.sh or something like that). I installed

I have a connection to the Internet (on eth1), and over this I also have a PPTP tunnel set up (on ppp0). Temporarily I use the (slower) PPTP tunnel for everything, but I really just have to use it for some specific purposes, which are distinguishable by port. So, I want to direct only some specific ports to ppp0, using eth1 for the rest. I have tried following the instructions on

Hi, my name is Yusuf, I just join with this groups. I have using samba PDC with LDAP as backend. I have a problem to change user password from web. I tried using sudo smbldap-passwd, change permission every file so apache can read / execute that file, but I'm still can't change the user password. Is there any way to change the password only with change the LDAP password (using

Okay here is my setup: Gentoo Box running 2.6.4 w/ 4 NICs 1 NIC is for internal network 3 NICs are for external network The machine has a static address assigned to the internal network nic. This nic runs dhcp and dns forwarding. The other 3 nics have external dynamic IP addresses. All will have the same gateway. There are 3 NICs because this is a very large pipe, that will only allocate a

I have a sendmail question. Can someone point me to a list appropriate to get some sendmail.mc help?

Hi, this is a followup to "Problem with HTB and ceil", the problem with the ceiling has been resolved, thanks to the memebers on this m/g. Now I have the problem that packets get into the correct classe with the correct marks but the prios are not respected. I have 4 different classes: 1. voip class / prio 0 / mark 100 / voip traffic 2. ACK class / prio 1 / mark 200 / ACK packets to

Helo list, I have been installed a SAMBA4 ver 4.2.3, running on openSuSE 13.2 x64 bits. Everything is ok, but a want add new groups and manage users and I need a GUI, I don't have experience working on LDAP. I installed, phpmyadmin but don't work well. If any body can help me. T.I.A -- Jesús Reyes Piedra Admin Red Neurodearrollo,Cárdenas La caja decía:"Requiere windows 95 o

Hi, I am trying to setup a shaper for my linux box and I am experiencing some problems. What I am trying to do is priorizing packets on the egress link, therefore I have setup some prio classes etc. The priorizing seem to work but the problem is that the ceil parameter doesnt seem to work on non leafs. This is what stats show: > class htb 1:1 root rate 3000bit ceil 3000bit burst 1602b/8 mpu