similar to: Sip bandwidth usage

Hello. I have been searching the archives for a simple, clear listing of the available codecs with total size, plus the data and overhead sizes. Does anyone have this handy, and can it be added somewhere, even the wiki. Regards...Martin -- The system will be down for 10 days for preventive maintenance.

Hi, I'm trying to use iaxcomm. I can place a call from the softphone, but when I place a call to it, when I answer I get ... NOTICE[16401]: File channel.c, Line 1094 (ast_read): Dropping incompatible voice frame on IAX2[paulohm]/3 of format GSM since our native format has changed to ALAW My iax.conf looks like this .. [paulohm] type=friend host=dynamic username=... secret=...

Hi, I'm trying to build a call center application that allows attendants to come in the morning and dial a certain extension to make their extension available. I wouldn't like to use the AgentLogin app because their line would need to stay off-hook (is this correct?) Is there any SET channel status command that would allow me to do something like this? PauloHM -------------- next

Count me in too. -----Original Message----- From: sip [mailto:sip@intology.com] Sent: Friday, October 17, 2003 1:56 PM To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Beta testers for visual configuration tool for asterisk count me in ----- Original Message ----- From: "Paulo Mannheimer" <paulohm@instant.com.br> To: <asterisk-users@lists.digium.com>

Hi U can visit the http://iaxclient.sf.net for some opensource underdevelopment softphones. Take Care Obaid Amin Syed >From: Chris Albertson <chrisalbertson90278@yahoo.com> >Reply-To: asterisk-users@lists.digium.com >To: asterisk-users@lists.digium.com >Subject: [Asterisk-Users] Good W2K softphone >Date: Fri, 3 Oct 2003 23:00:13 -0700 (PDT) > > >I haven't

Hi, I'm having random hangup problems with zap channels. If I turn busydetect off in Zapata.conf, * fails completely to detect a user hangup in the middle of a script. On the other hand, if I turn it on, everything works much better, but long calls tend to be hung up without a motive. Any other parameter that I can try? Any #define that I can tweak and recompile? Will callprogress

Hi All, We've been developing for a while an IDE for Asterisk, and the time has come to open it for beta testers. You can check at www.instant.com.br/viv.html for a snapshot of the application. Current modules are Dialplan and VoiceMail configuration. As you may see, it is all-visual, with drag and drop support and integrated sound recording, saving and cross-checking, so you dialpland

Hi All, Can anyone tell me what are the <dev1> <dev2> parameters that I should use to run pridump? I took a look at the source code but couldn't figure this one out. Best, PauloHM

Hi all, We are about to make our first channel bank install. This will be a one PRI outside connection and up to 70 extensions. As the schedule (and the budget) is pretty tight, I would like to learn a little bit more about general experiences with channel banks, like echo cancellation problems, Caller ID usage, etc. TIA, Paulohm

Hi, we are setting a 120-channel conference server and would like to learn if someone already did this (hardware, problems, etc...) Best regards, PauloHM

Hi, I'm testing an E1 with E&M signaling. Some of the problems I'm running into are the following: 1) if I try to configure any channel above channel 15, I start getting a "multiframe alignment error" on my telco test equipment. So I have my zaptel file only configured for 15 channels, like this span=1,1,0,cas,hdb3 e&m=1-15 2) When the test equipment tries to send me

Hi, I'm installing my first E100P. My zaptel reads the following: Span=1,0,0,ccs,hdb3,crc4 E&m=1-31 My Zapata.conf reads the following: Signaling = em_w Channel =1-15 Channel =16-31 After starting the zapter service I get: ZT_SPANCONFIG failed on span 1: No such device or address (6) ??? PauloHM -------------- next part -------------- An HTML attachment was scrubbed...

Hi All, Does anyone have any experience with the ArrayCom VoIP phone? I bought one a couple of weeks ago, it used to work quite well with * until I misconfigured one option. I now cannot make it work anymore, because the phone boots up, doesn't find a valid SIP gateway, resets itself and keeps rebooting indefinetely ;-( Their technical support refuses to answer my questions. Any hint on a

Hi, I?m having a serious problem at one customer. After 6 hours answering a PRI line, * stops responding in a very similar situation as described here ... http://lists.digium.com/pipermail/asterisk-users/2003-July/015391.html I took a look at "/proc/first * PID/fd" and there are hundreds of file descriptors; If I try to connect using asterisk -r I get the "broken pipe"

Hi folks, As none of the SIP softphones that I tested can disable more than one incoming call, I decided to implement it by software ;-) I'm attaching a patch that does it. To make it work, modify your sip.conf file and include callwaiting=[0|1] at the general section, or for each peer that you wish to control. Please note that I haven't tested it too much, and my source tree is quite

Hi, I would like * to treat a SIP extension as a normal extension, when it comes to the busy functionality. In other words, if someone tries to call the SIP phone and there is already an ongoing conversation, the new caller should get a busy message/tone Is there any parameter that I can set? Is this something that should be configured at my softphone? Best, PHM

I am having a really hard time getting gnophone working with asterisk. Gnophone tries to register with my server but there is no response. I can direct incoming calls to gnophone but if gnophone answers them, asterisk does not recognize it. Here is my configuration: iax.conf [jambo] type=user host=dynamic defaultip=136.159.99.100 permit=136.159.99.100 username=jambo secret=fubar

Would like to deploy * in a small help desk environment (five to ten people) using call queues and some sort of CTI interface to pop Remedy screen data in front of the help desk person receiving the call. Data to be popped would be based on CallerID. Anyone doing something similar? Anyone interfacing to an external Remedy system? Any reference sites that I could read/learn more of the

Hi all, I installed all needed RPMs by GnoPhone to be installed without problems but when attempting to install GnoPhone itself I get this message: # rpm -Uvh gnophone-0.2.4-1.i386.rpm error: Failed dependencies: mozilla >= 0.9.2 is needed by gnophone-0.2.4-1 libgtkembedmoz.so is needed by gnophone-0.2.4-1 libgtksuperwin.so is needed by gnophone-0.2.4-1 I'm using

Hi all, In a forthcommming project, I'll have one * server tentatively calling 10 PSTN numbers through IAX2 and an * gateway. Can someone tell me if bandwidth is being used for each of these calls/channels even while my gateway tries to call and connect the destination numbers? Best, PauloHM