similar to: Extensions Problem

In taking a cursory browse at Vonage's site today, I noticed they are now offering a soft phone. Has anyone had any experience using this? And does this possibly open new opportunities for using Vonage with Asterisk? Just thinking outloud on the list, soliciting thoughts and experiences from others. AJ

I've not been able to register with iaxtel.com for the last couple of days. Is anyone else seeing this, or did I miss something?

sorry if this has been asked before. is it possible to configure asterisk to use an outbound sip proxy? thanks __________________________________ Do you Yahoo!? Win a $20,000 Career Makeover at Yahoo! HotJobs http://hotjobs.sweepstakes.yahoo.com/careermakeover

Hello, I am new to Asterisk, as of today. Installed on a RH9 box, with no problems. Built with 'make samples' as to get an understanding of how things work. Currently, I am utilizing SJPhone as a SIP client - not interested in shelling out cash for the IP phones, until I know I have a hold on things. I have run into a few problems I was hoping you could help me with : 1. When

Does anybody have a good source for hold music? I can see a number of companies on the web that sell royalty-free MOH, but they don't all provide samples. The customer service desk has requested "calming, not sleeping, but calming" and "this is a high-tech company, so make it 'techie' [sic]". Thanks, --Ernest

Hi, I've ran into an issue with a PRI provider in a major metropolitan area that I haven't needed to deal with before and I was hoping someone might have some insight on how to handle this within the Asterisk dialplan. At this location users can't always tell if a number is long distance or not (there are a lot of area codes and prefixes in the vicinity). Additionally, users are

I need to be able to dial a long distance provider that uses an access number and an auth code. I would like to be able to program this so that the user can dial 8 and then the long distance number, asterisk will hopefully do everything in the middle. The sequence to accessing the provider is on my traditional phone speed dial as: * Dial local access number * Wait 5 seconds * Dial the auth

I need help need recording all call for my pbx but i am a novato in asterisk my confi for record is: exten=>_NXXXXXXXXX,n,Set(CALLFILENAME=CLIENTE-${CALLERID(num)}-${EXTEN}-${STRFTIME(${EPOCH},,%Y%m%d-%H%M%S)}-${UNIQUEID}) exten => _NXXXXXXXXX,n,MixMonitor(${CALLFILENAME}.gsm,m) exten => _NXXXXXXXXX,n,Dial(${TRUNK_CLIENTE}/${EXTEN}) -- Bayardo S?nchez Garc?a Web Developer - Internet

Greetings all.. We have an inbound/outbound PRI installed and terminated on a T400P ? Digium Quad T1 card. We?re seeing an odd problem when sending $CALLERIDNUM when calls from the PRI are forwarded back out to the PSTN over the PRI. The $CALLERIDNUM is not being sent out along with the call. It?s sending the phone number of the PRI itself, rather than the $CALLERIDNUM information. Yes, we can

Due to changes at the office, I'm finally getting around to setting up an AA to deal with incoming calls. One of the big changes is that we're dropping the old alphanumeric pager and will just send pages to our phones. I've got the outbound greeting message working in a test context no problem right now, but I'm kind of stuck on how to capture a DTMF sequence from a user and

We are setting up asterisk with Teliax and having trouble getting the incoming call to work all the time, the outgoing does not seem to have a problem. I have worked with their support but since they say that we are getting the initial call to our server they want to charge to take a look. They did a tcpdump and we are seeing an attempt but no CLI most of the time. Some times we see this but it

Hello all, Just starting to setup asterisk v 1.4.11 and need to run three distinct phone systems for three different companies. So far, I have inbound lines going to the appropriate dial plan within the extensions.conf file. I'm using exten => _X.,1,NoOp(FROM NUMBER: ${SIP_HEADER(TO):5:10}) to determine which number is being dialed by the caller and then using a gotoif to get to

After so many rings when the party does not answer, my SIP phone says Call Failed. Why doesn't it just keep ringing? Here's the dial plan rule: exten => _NXXXXXXXXX,1,Dial(SIP/${EXTEN}@sip.myprovider.com,,r) exten => _NXXXXXXXXX,n,Hangup()

I'm having trouble setting the outbound caller ID on calls I make from my PRI trunk group. The PRIs are served out of a 5ESS. Telco has set the PRIs up for user provided caller id information, so I believe I just don't have it set up right in my dialplan or something. I can't seem to find an example of setting the outbound caller ID specifically for a 5ESS. Does anyone have an

I have an interesting dilemma with sequencing in the dialplan. Up to now, I have assumed that the extensions in the dial plan were tested in the order that they appear in extensions.conf. In other words, I have the following fragment which was designed to dial toll free on the PSTN and all other long distance on VoIP: [longdistance] include => local

I am going through previous posts, but I am not finding anything. I apologize if this has been covered already. I want to be able to change the CallerID for outbound calls based on the extension making the calls. However, I don't really need this level of granularity. I have one asterisk box serving many markets. I want to set the CallerID to a local number in each market. So, of someone

I am trying to retrieve the cause code of a outgoing call over a PRI where the number called is out of service. When an out service number is called I get a recording that the number dialed is not a working number. I see cause code 1 in in the CLI as soon as the call is dialed the Telco recording goes on for 30 sec. then hangs up. Any idea on how retrieve info that the called number is is

Hi, What dialplan option do I need to send a call out like this: NPA-NXX-xxxx local calls 1-NPA-NXX-xxxx - long distance Won't 'national' send it out NPA-NXX-xxxx no matter if it's long distance or not?

hi I have a passive isdn port configured in modem.conf in extention.conf i use this two channel (ttyI0 and ttyI1) with the string: exten => _NXXXXXXXXX,1,Dial,Modem/g1:${EXTEN}|60|r how can i hide my msn? is it possible to activate the clir with the @ before the ${EXTEN}? thanks Cristian

If this handles the case where 10 digits are required: exten => _9NXXXXXXXXX,1,StripMSD,1 exten => _NXXXXXXXXX,2,Dial,Zap/4/BYEXTENSION How do you create a handler which works for either this or the case with a leading '1' plus 10 digits? tnx -kim -- w8hdkim@gmail.com