similar to: Questions about Zapateller and Privacy Manager

I am having issues with Privacy Manager and Zapateller. If I set callerid="" on a sip user zapateller sends the tones If I set callerid="Anonymous" <8475551212> zapateller doesn't send the tones If I call from a phone after dialing *67 zapateller doesn't send the tones In the last 2 cases, the display on the phone shows -Blocked Call- PrivacyManager always gives

Hi All, In theory if I do this; exten => s,1,Zapateller(nocallerid) exten => s,2,Privacymanager exten => s,3,Dial(a bunch of SIP extensions) My callers should only hear the anti-telemarketing tones if they call from a line that has no caller*ID and then get offered an opportunity to enter it, right? What I'm finding is that in the event of no CID the caller gets dumped into the

Hello-- I've been playing with the privacy options on my home/home-office system since August last year, and have some results, gleaned from my CDR records, which over the last 13 months, number a total of 8672, which includes incoming, as well as outgoing calls. Before I start spitting out numbers, let me note that with the current setup, I haven't had to tell a single telemarketer

Been tinkering and found Zapateller appears to be answering when I didn't expect it to. I have something like so: [incoming] exten => s,1,NoOp ;Zapateller(answer|nocallerid) exten => s,2,PrivacyManager exten => s,3,Dial(${RING},20) ... I have a 1x1 analog * installation with a couple IP phones too. I've got the FXO interface connected to the home phone line. When I get an

I'm having a problem with Asterisk picking up the Zap/1 and thinking its a new call when instead I've already been on the phone talking to a person. This is not my ideal setup and currently I have just an FXO card and Asterisk is in parallel with my phone system instead of being in the front. I'm not sure if the problem would be fixed by adding an FXS card and putting my phones on

Does anybody know why I get this error when using zapateller: WARNING[1209214400]: File rtp.c, Line 327 (ast_rtcp_read): RTP Read error: Resource temporarily unavailable It's scrolls until a sound is recived from the line, then it plays the zapateller tones. /Mike

Hi all, I'm looking for some rudimentary insight on GotoIf() which seems to be failing on me in my dial plan. All I basically wish to do is block a particular caller. Sounds easy enough, but my ternary operator/plan currently is not properly being implemented. Can anyone spot where I'm being a momo? All extensions get forwarded to the following macro: [macro-forward] ; arg1 = phone

I am attempting to write in incoming context for calls. 1. If the caller id is given and it is not black listed it will Playback a greeting and then right the phone or go to voicemail under busy or unavailable conditions 2. If no caller id is given, then Privacy Manager will ask for the number. I am testing 6145551212 to see if the black list will work 3. If a caller id is given, and it is

Hey all...I'm brand new to * and I want to convert my home into a pbx type setup. I've figured out that I want a Wildcard X100P to bring my single POTS CO into my Linux box. My problem is that I'm sure sure what I need to do to get my analog phones connected up into a structured phone system. It *looks* like I can go the route of the Cisco Analog -> VOIP for about $100 on ebay.

Hi all, I have the following in my extensions.conf: exten => s,4,GotoIf($["${CALLERID(number)}" = "8585979857" | "8585970327"]?15:5) The numbers listed above are known spammer numbers. However, when I call from any other CALLERID, it still directs me to s,15 which is the Hangup() application. Here are logs from the asterisk CLI: -- Executing

I am looking to install a web interface for Asterisk to transfer calls and look who's on the phone. If anybody has a working web interface please let me know. I installed the www.asternic.com (operator) But when I bring up my web browser it says transferring data and does not bring a browser. -----Original Message----- From: asterisk-users-admin@lists.digium.com

Is it possible to give a caller three goes at an extension number then hangup? exten => s,1,Zapateller(answer|nocallerid) exten => s,2,PrivacyManager exten => s,3,Ringing(1) exten => s,4,NoOp(${CALLERID}) exten => s,5,SetMusicOnHold(random) exten => s,6,Background(silence/1) exten => s,7,Background(thank-you-for-calling) exten => s,8,Background(silence/1) exten =>

Hi All I'm tracing a very strange problem which I could reproduce with different versions up to 1.2.5 (sorry, didn't update to a newer one yet). Scenario 1: Problem does not occure. ============================= Sip Phone registered directly to the Asterisk. exten => i,1,Zapateller() exten => i,n,Playback(invalid,noanswer) exten => i,n,Hangup() Works like expected. I dial an

Andi - I have experienced the same issue you mention and gotten no reply as to a way to fix it. I finally implemented "blacklist" into my Asterisk and added "Anonymous", "anonymous", "unknown", "Unknown", etc., into my blacklist file. When those come in with an IP address instead of a phone number but have no real name, they get the

Hi, I have been using Zapateller with a TDM400 no problems at all, but recently I have ported our BT number to a VoIP provider, and have a strange problem. When I phone our number I first get the BT unavailable three tone sound, and then it actually connects the call via IAX2. So, I disabled zapateller in the dialplan and tried again. Would you believe it worked fine. Has anybody else come

My Asterisk fax detection used to work, but no longer does. OK. So, here's the deal: 1. It appears that the "faxdetect" command cannot be applied channel-by-channel in zapata.conf anymore, as Asterisk appears to the last "faxdetect=" command to ALL channels. 2. My stations are detected and sent to the proper extension; i.e., when I send a fax from one zap extension

Hi list! I'm trying to get PrivacyManager working but for some reason it always thinks that CallerID is present (when it isn't). I get this on the console: == Primary D-Channel on span 1 up -- Accepting voice call from '' to '0711234567' on channel 0/2, span 1 -- Executing Ringing("Zap/2-1", "") in new stack -- Executing

Hi. I'm new to Asterisk and have been working on setting up a development server but have gotten myself a bit confused. I'd like to implement the following logic for calls coming from the PSTN: Check for caller-id yes => keep going no => play SIT and prompt for telephone number Check time of day to see if it's day / night day => ring some phones

I upgraded my server from Fedora Core 4 to Fedora Core 5. I was wondering if anybody else has run into the problem and know's the fix? I recompiled asterisk and if I don't have the /usr/lib/asterisk/modules/codec_g729a.so file in place it works. I use or used to use the licensed G729 Codec from Digium. This is the error message from asterisk -vvg: [app_playback.so] => (Sound File

does anyone have a recorder GSM file that emulates the Telco's "if you are a telemarketer please hangup now" recording? I don't see one in the sounds dir. the ZapATEller works great for computerized callers but if a human hears this message asking them to go away they have to. Isn't that right? Dave