similar to: no dial out

Hi everyone, I just got myself a IAXy device and am trying to integrate it to our asterisk server. I configured the IAXy and it is registering and I get a dial-tone. If I try calling another SIP device, and I get "can't translate IAX2 to SIP" How can I make my IAX device communicate with a SIP device (and vice-versa)? Here's what the log says: -- Executing

What I am trying to do is the following: A call is sent to the * box via a SIP invite. The * box answers via an IVR menu system with " Enter the extension you want to dial" so I enter in my 5 digit extension and get the below message. Jan 18 10:10:03 WARNING[-1380238416]: channel.c:1860 ast_request: No channel type registered for 'SIP)' Jan 18 10:10:03 NOTICE[-1380238416]:

Hello I have created an iax exten in my iax.conf file: [300] type=friend username=300 secret=*** context=default host=dynamic callerid="some name" <300> auth=md5 Then in my extensions.conf I have: exten => 300,1,Dial(IAX/${EXTEN},20) exten => 300,2,Hangup I can dial from iaxComm (a soft IAX client) and that works fine. But when I try to dial 300 get: WARNING[22077]:

Hi, I'm trying to set up a basic FXO <> SIP gateway. That is, I want calls from my SIP phone to simply be dumped onto the POTS line. My (entire) extensions.conf is: [from-sip] exten => _9NXXXXXX,1,Dial(ZAP/1/${EXTEN}) and my zaptel.conf is: fxsks=1 loadzone=us defaultzone=us and my zapata.conf is: context=incoming signalling=fxs_ks echocancel=yes

Hello list When i'm trying to dial into our pstn the following errors occure: -- Executing Dial("SIP/snomsip-dbd0", "/2100") in new stack Sep 9 10:02:22 WARNING[59409]: channel.c:1901 ast_request: No channel type registered for '' Sep 9 10:02:22 NOTICE[59409]: app_dial.c:715 dial_exec: Unable to create channel of type '' == Everyone is busy/congested

Hi, Could someone help me on configuring a H.323 trunk. I am trying to set up the following scenario: [SIPphone(2004)]--[asterisk/oh323/asterisk-oh323]--H323Trunk--[PBX]--[H323phone/(8004)] I am using the following versions: Linux CentOS 3.3/2.4.21-.EL.co asterisk 1.0.1 pwlib_1.5.2 openh323_1.12.2 asterisk-oh323-0.6.3b Calling from Asterisk (2004) to the

I have two * boxes running two differnet versions of *. Box A is running: Asterisk CVS-HEAD-07/14/04-16:28:29 built by root@asterick.dell.cpu.com on a i686 running Linux Box B is running: Asterisk 1.0.3 built by root@dell.cpu.net on a i386 running FreeBSD I can make a IAX call from B to A but not from A to B. When I try to make a call from A to B I get these messages: Feb 21 12:48:12

I think I have it configured properly. ztcfg -vv shows it as channel 1 and zttool shows it as OK. But I can't dial out. When I try, it shows it arrive in teh right stack, but then issues the following errors: channel.c:1676 ast_request: No channel type registered for '{PSTN-1}' app_dial.c:554 dial_exec: Unable to create channel of type '{PSTN-1}' = = Everyone is busy at

I have been running af Asterisk server Version 0.7.2 for a while now But I I wanted to upgrade my version to the new 0.9.0 or the CVS 1.0 Stable. But when I install one of the new asterisk servers I having lots of troubles with the IAX connection between my servers. When I start the 0.7.2 asterisk server it shows me something lige this == Parsing '/etc/asterisk/iax.conf': Found ==

Please can someone help me with the following two error messages: Error 1. I have loaded the Zaptel dirvers and everything is ok with ztcfg. I have configured Zapata.conf and everthing looks good but it apears the Zap channels dont load when starting Asterisk. When I make a call to one of the fxs port I get the following error message. -- Executing Dial("SIP/39-b204",

Hi, When I dial from my sip device to the extension 1234 which is linked to the ALSA console driver the call fails with the message "No channel type registered for 'ALSA'" (see below). I would like to have the console autoanswer for paging. However when I call from the console to the sip device the call completes fine. I alias alsa device hw:1,0 to card1 in /etc/asound.conf

Hi to all! I have this config, PSTN <--> AS5300 <--> ASTERISK I am using the Cisco as5300 to receive incoming calls and routing them to Asterisk for IVR. When I ran asterisk this is what I get when calling the voicemail demo. *CLI> -- Executing Playback("SIP/-081058b8", "transfer|skip") in new stack -- Executing Macro("SIP/-081058b8",

I have a problem with my asterisk and IAX2. It seems that I do not have it or it's broken. I have been trying to connect to another asterisk server and I was thinking I am setting it up wrong. But I am getting this on the asterisk CLI for dialing out via IAX2 even to IAXTEL which is now not working. I used to be able to use it! But that was with IAX not IAX2. Here is the error I get.

I'm trying to clean up some notices/warnings that are repeatedly logged in *.Any Help would be appreciated as I'm not sure of the cause /solution. Here are the errors: Nov 17 15:53:38 WARNING[1217602880]: File chan_zap.c, Line 1321 (zt_call): cidspill already exists?? +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ /* Don't send audio while on hook, until the call

Hi All - Well, after happily existing in a one office environment with asterisk for a few months, I've now decided to start adding in our other offices with their own * boxes and IAX connections (over VPN). Unfortunately, I'm an idiot and I can't get it to work. I'm having some kind of problem with codecs, I guess, but I don't understand what or why. When trying to use

Hi asterisk users, I have a inssue with incoming calls with wcfxo card, while receiving a call, I?ve configured my dialplan to forward the call to all mi home voip extensions and that works just fine, but while in the call, after a few seconds, the pbx starts the simple switch once more and keeps ringing the voip extensions log as follows:

Hi, I am using the Grandstream HandyTone 486 as a SIP Adapter with a regular phone. Asterisk configuration is listed below. When I attempt to place a H.323 call, I receive the following errors: - Executing Dial("SIP/2000-3029", "OH323/##########@xxx.xxx.xxx.xx:1720|20") in new stack Aug 13 09:13:03 WARNING[20497]: channel.c:1806 ast_request: No translator path exists

Hi Asterisk-ians! Need all of your help. I am stuck with this issue for last few days. I have one X100P installed in my system. My Asterisk is registered with another Asterisk Server/SIP provider as client and the call is successfully received by my Asterisk server (named as starwars). Now, the extentions.conf file states, the incoming INTO * should go out to fxo as below: exten =>

Hi, here what i have: [2001]--[Asterisk]---[ISDN-Trunk]---[PBX]--[8004] Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. Dialing from Astersik extension 2001 to PBX extension 8004 via ISDN Trunk gives me the following error, -- Executing Dial("SIP/2001-8a8e", "Modem/ttyI0:998004|20|r") in new stack

Hello, all. In section 4.3.10 of the Asterisk Handbook, there is an example of an LCR/Failover Trunking scenario. I've tried it, and it works, as long as I fail over from something else to ZAP, but I can't get it to "hunt" to the other context if the zapata channel (or group) is used first. Can anyone help? Here is my extensions.conf, and the error message I get.