similar to: Call pickup (*8) on SIP devices.

Hi there, Besides the problem of Voicetronix dialing too early before the carrier gives a dial tone, there also appears to be issues with the audio quality when more than 1 channel is utilized.

Since www.bkw.org seems not to exist anymore (getting response from some hosting provider), does anyone happend to have a copy of app_valetparking.c from www.bkw.org - the one that should work with * stable 1.0.X ? If so please contact me. One that can be downloaded from www.loligo.com dosn't compile with 1.0.X, and SuperValletParking (www.asterlink.com/svp/) seems to be for * HEAD

Nope ! This is the one that tries to include PRE 1.0.X header file <parking.h>. It cannot compile on * 1.0.X (I have tried also to include <features.h> instead of <parking.h> (as far as I know features.h is successor to parking.h), but still without results). Thanks anyway. Nenad > > Try this > >> Since www.bkw.org seems not to exist anymore (getting

Hi. I was wondering if there's a parameter to limit the number of concurrent sessions in IAX, globally or on a per-user basis. That could be needed for security purposes (to prevent dos attacks), to limit bandwidth / cpu usage, or to not allow more than N guest connections, for example. Any other VoIP channel support that? (like SIP, MGCP) Matteo. -- Brancaleoni Matteo

Hello. Has someone been able to make work faxes over sip, i have one mp108 fxo and one mp108 fxs, my setup is : telco analog line -----> mp108fxo -----> Asterisk ------> mp108fxs -------> fax machine 1) Asterisk detects the tone from the sending fax ( i am receiving ) but looks for extension 'ff' not 'fax', ( at least that's what * complaint, invalid

Hello. I have been going thru the wiki and asterisk related sites and have not been able to find any documentation about how to configure an Adtran TA750 channel bank. The remote disconnect supervision doesn't seem to be working, when the remote caller hangs up asterisk takes up to 30-45 seconds to hangup the call. Can somebody help? Thank's

I am running asterisk 1.4.26.1 and using ALSA not oss dahdi 2.2.0 and libpri-1.4.10 I am calling into console/dsp I hear the audio just fine then after the hangup I hear ringing on the console/dsp. Why would that be? I found this bug for OSS https://issues.asterisk.org/view.php?id=13686 Does the same thing exist in ALSA??? some traces below Jerry == Parsing

Is it possible to specify a 'wrap-up' time in a queue so agents will have a specified amount of time to complete tasks between calls unless they hit a key on the phone? As it is they can recieve a call moments after they hang up with no 'down time'. Thanks Jim Friedeck

Hi, I have following problems compiling bristuff-0.2.0RC8m. Has anybody seen them before and can point me in the right direction? zaphfc/make all: ---------------------- /usr/src/asterisk/bristuff-0.2.0-RC8m/zaphfc/zaphfc.c: In function 'hfc_findCards': /usr/src/asterisk/bristuff-0.2.0-RC8m/zaphfc/zaphfc.c:1000: error: invalid lvalue in assignment make[2]: *** [

Hello. I have two snom200 ip phones and 1 mp108fxs (audiocodes 8 fxs) and i dont get a ring in the caller phone when I dial from a snom200 to the other snom200 or the mp108fxs, I made a debug with ethereal, and I can see a "Ringing" packet being return from the called snom200 or mp108fxs to the asterisk box, but it is not being re-transmitted to the caller snom200. Altough

Hi, i just received an E100P, this is the first one I have ever seen, and notice that the board reads T100P. Is this right ? The antistatic bag had a small label that has E100P written on it, and the card is a bit different than the T100P I already have, Does Digium use the same boards for both cards ? I don't have an E1 link here, can I test the card just by loading the driver and run

Hello, I have had several instances over the last month of Asterisk freezing, sometimes after 12 hours, sometimes after 8 days. The common elements are that: - all Zap channels lock[hangups don't register and no new calls in or out] - no new in/outbound calls can be made on Zap or SIP channels - people who are still connected to calls can continue to talk - in the CLI interface, you can

Hello all. I saw a few weeks ago a discussion about cal pickup, *8, not working but did not find a message about it being resolved, I look for a bug on the bug list but did not find anything about it not working, nor a bug open. I installed asterisk 0.9.0, have one sip fxo gateway and only sip phones, all of them have callgroup=1 and pickupgroup=1 but I can not get a call that is

Hi all. Is there a way to collect the digits dialled in asterisk and stored them in a variable ? I'm setting a submenu for the user to change his extension dial in treatment from a standard extension to something like 'automatic transfer' and I need to ask for the number where to transfer the calls, pass it to an AGI and store it in a DB for later use. I also need to ask

Good evening all. I'm having this strange behavior when dialing two or more simultaneus calls via IAX to other * boxes. Sound starts to have more latency, wich increments until it's almost impossible to talk (6 or more seconds), I try this calling with two grandstreams, one grandstream one tdm410p, one tdm410p and sjphone, sjphone and one grandstream, the result are similar.

Hi all. Is there a problem with digium cvs ? I can't connect to it, it just keeps giving a... cvs [login aborted]: connect to cvs.digium.com(216.207.245.20):2401 failed: Coonection refused Thank's

Hi list, i'm trying to do that iax channels can acces the pickup feature(normaly *8 dialing). But always the iax channel when dial *8, search for the extensi?n *8 on its context. I know i can program the *8 extension with the pickup applicati?n. But its doesn't works for me, becouse i need to pickup some calls comming from IVR's o Queues. And there de exten is no the same as the

Hi all, I have a GXP2000 with BLF configured. I follow the configuration guide to enable the pickup cmd as follow and include it under corresponding content. [BLF_group_pickup] exten => _**1XX,1,Pickup(${EXTEN:2}) exten => _**1XX,n,Hangup The I press the single key to pickup the call to extension 100 when there is a call to it. From CLI, I can see it issue **100 to asterisk but failed

I'm having trouble with call pickups. Suppose ring group is 100 and has extensions 101 and 102. Someone calls 100, 101 rings and 102 wants to pick the call up. If 102 dials **100, call pickup works. If 102 dials **101, call pickup fails. In my dialplan I have: exten => **101,1,NoOp(pickup extension) exten => **101,n,Pickup(101) exten => **101,n,NoOp(pickup group) exten =>

Hi, when i use the *8 for the call pickup the call i fetch is directly connected and i can't see the callers number. What i want is that the call in the first rings at my phone and in the second i can see the callers number. I am using a polycom 500 ip phone. Is this a special polycom problem? Regards, Kib