similar to: System layout

Hi, What driver should i use with APC BK-300C ? Michale Plourde Digicom Technologies

I have a Digicom TE110p card installed in our exchange. I have compiled and installed libpri, zaptel and recompiled and installed asterisk. I have configured udev as I am running Fedora Core 3. The problem that I have is that when zaptel is not running everything works fine. However when I start zaptel (service start zaptel) then I can make normal calls ok but the 'Playback()'

Hi all I am looking at implementing asterisk at a company with two ISDN bricks (60 lines). I know that the VoIP will absorb at least on brick worth of lines but that still leaves me with a need for 30 ISDN lines. As far as I can tell most of the Digicom cards have 4 FXS ports and I've read on this list that at most two could coincide in a box simultaneously without causing an interupt

Hello, Here is what I want to do: I have a patch that make me able to mark package by its nature useing layer 7. So I use this line to mark a packge (i will use msnmessenger like example): $IPT -t mangle -A POSTROUTING -m layer7 --l7proto msnmessenger -j MARK --set-mark 3001 Now I want that all packges with this mark get throu my gateway using the link at eth2 and all other packges use

Does anyone have any views on the best software base SIP client to use that normal users could use with Asterisk without being too techie ? I have tried the X-Lite client with varying success. The first version worked OK but music on hold broke the voice paths and the slightly newer version initiated the call but failed to make the voice connect in both directions. The SJphone client works but

Problem I have is this. outside firewall (extension 2003) can call me inside firewall (extension 2000) and all is fine. If I call from inside firewall (extension 2000) to outside firewall (extension 2003) I hear no ringing and person at other end can pick up and I hear for maybe a half second then I go to voicemail. If I add another extension on the outside then communication between outside

All, I have my * box NAT'd with all ports forwarded that are SIP related (based on Wiki). I also have nat=yes, externalip=WAN address of firewall, internalip=LAN network of *. I have my Xten soft phone on a PC which is NAT'd behind firewall with ports forwarded. I have also followed instructions on Wiki for Xten. I can authenticate fine, and sip show peers shows my extension is OK,

Hello Everyone I just bough my Xten Eyebeam but i don figure out how to make the video works i only see a black screen where de remote video suposse to appear, Any help regarding this matter will be very preciated Thank You

I've got the XTEN Lite soft phone mostly working with * but it's dropping out like a very bad cell phone call. The GSM codec is worst (unusable), G711u and G711a are best but not good enough to use. I don't think it's a lack of bandwidth. What tuning options or approaches should I be investigating to make this work. Also, what's the best soft phone(s) for Windows XP?

just reinstalled @home and i have a one of those 100 cards, anyways when i call from the pstn the box picks up but i hear nothing, then it clicks a couple times, then nothing again, i am trying to get the digital receptionist to work but it won't save my wav file to the @home box and all the radio buttons under incoming calls are greyed out. the greyed out thing seems to be my biggest problem

hi there! I have a couple phones connected to a sipura ata and if I go into *- IVR, I press options on the regular phones and it all works fine and dandy. then I connect an xten softphone, a new extension in my dialplan, I dial the ivr, * asks me to dial something to go through it, I press keys on xten, but nothing happens, * just times out through as if I did not press anything! is there some

Which rpm has libstdc++.so.5? xten-xlite for linux says it needs this. Of course, there will be something else it will need after I get this....

Sorry, I don't remember who was asking about this, but it seems that if you record a video message that contains the send video start, it will actually fire up the remote receive window. I.E. Previously I was using the recording section of voicemail to create my video IVR's. This meant that when I arrived at the section to record the message, I had already clicked send video in Xten.

I have d/l the iso (*@home 0.9) , built the * box and followed the directions in the * handbook and http://www.geekgazette.com/index.php?option=com_content&task=view&id=2&Itemi d=26. I created extension 200 and verified that * was running fine. Loaded Xten lite, setup the proxy for local ip (10.0.0.201) per the handbook. After turning off the Norton Firewall protection, I am able to

Guys. Im writing this because Ive checked the wiki, Xten website and read a lot of docs and still cant figure out a way around the NAT issues. Maybe somebody else can give me some ideas from a fresh perpective. My test setup is this: Asterisk -> 2wire homeportal Firewall -> internet Computer with Xten eyebeam The asterisk box and the computer with xten beam are behind the same

HI All , I am running a FC6 box with two internet links with load balance . Every thing is working fine expect the MSN connection that failed and reconnect every time and SSL connections . I would link to know if with the nona howto I could fix that . I have been tried with no success to redirect that connection only to one link but its look like do not work . Here my configuration :

Hello everyone. I am having problems getting speex support. It seems * is not loading speex. When i did a make in the codecs sub dir, the following error pops up when making speex: codec_speex.c:34:19: speex.h: No such file or directory is this file missing in the cvs as i just removed the whole * dir and did a new checkout and still seem to get this error, or do i need to get/install

Guys, anybody has seen or is using some kind of softphone on any square screen device with WM5? Ive tried sjlabs one and xten for pocket pc and they do work on Wm5 but they are designed for standard screens, anybody using anything on square ones?

Dear Guys, I?ve test Xten Lite softphone to connect to my Asterisk Box but it registers all the three lines at the same time and if I try to dial an extension it tries to reach 3 Ext. at the same time, can somebody haved this trouble? and how can I fix it. Also, I ?ll like to have the Xten LITE or PRO Softphone (Lite is free and PRO about $50.00 USD) it can hanle 3 lines (lite) and 6 lines

hi xten.de produced an activex for web phone. but I can not find any link for download. can u help me ? best Mani ____________________________________________________________________________________ Now that's room service! Choose from over 150,000 hotels in 45,000 destinations on Yahoo! Travel to find your fit. http://farechase.yahoo.com/promo-generic-14795097