similar to: IAXTEL - Problem Configuration.

[ Sorry, I incorrectly copied some Reference headers into this post and tacked it onto the wrong thread. -Steve ] So far, I have been able to receive incoming iaxtel calls via my assigned 1-700-xxx-xxxx number, but only when using md5 authentication in iax.conf: [iaxtel] type=user ; Incoming calls only context=incoming auth=md5 secret=<mysecret> ; Required for

Hello I am still having problems with IAXTELL and FWD configuration. I get the following when I dial 17009965342 which is set as an example to dial to FWD people. 1+700+99+ 5 digit number. I have placed XXXXX where my passwords are. CLI> Executing Dial("Zap/14-1", "IAX/abatista:xxxxxx@iaxtel.com/917009965342@iaxtel") in new stack -- Calling using options

I have been playing around with asterisk for a week or so now and haven't had too much trouble getting things to work but one thing seems to puzzle me. I have been patient hoping that there was a configuration error on the server or that the toll-free gateway was down but nothing has changed. I have the following configuration context for IAXTEL: [iaxtel] exten =>

Hi all I've been trying to make * work with IAXtel to no avail, all seems ok in the config but am not getting anywhere This is what I'm getting from console (user/pass/dest # changed for obvious reasons): DEBUG[1133735216]: File chan_sip.c, Line 3841 (check_user): Setting NAT on RTP to 0 DEBUG[1133735216]: File chan_sip.c, Line 4891 (handle_request): Check for res for phone1

<BLOCKQUOTE style="PADDING-LEFT: 8px; MARGIN-LEFT: 8px; BORDER-LEFT: blue 2px solid"> <DIV>Hello,</DIV> <DIV>&nbsp;can someone tell me what's wrong with this? I can't make toll free calls via iaxtel. Here's the definition in my extensions.conf</DIV> <DIV>&nbsp;</DIV><FONT size=2> <DIV>[iaxtel-trunks]</DIV>

I created an account at IAXTEL.com to route 1-700-XXX-XXXX calls through. IAXTEL.com gave me a number (example) of 700-555-6226. I have made the following changes to my: /etc/asterisk/extensions.conf: [iaxtel700] exten => _81700XXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1}) exten => _81800NXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1})

Has anybody had a problem registering their IAXtel account? I just signed up for an account and followed the documentation on iaxtel.org and my registration is always rejected. When I type "iax show registry", I get the following output: Host Username Perceived Refresh State 12.37.165.130:5036 xxxxxxxx <Unregistered> 60 Rejected

I signed up for an IAXTEL account and have been trying, unsuccessfully, to get it working. In IAX.CONF I have: [iaxtel_out] type=peer host=iaxtel.com username=USERNAME secret=SECRET auth=rsa inkeys=iaxtel [iaxtel] type=friend context=incoming host=iaxtel.com auth=rsa inkeys=iaxtel However, when I start Asterisk, I get the following warning: [chan_iax2.so] => (Inter Asterisk eXchange

When I try to call iaxtel it goes to codec ADPCM even though I have define in iax.conf gsm Call accepted by 69.73.19.178 (format ADPCM) -- Format for call is ADPCM My settings: [general] port=4569 register => xxxx:xxxx@iaxtel.com bandwidth=high jitterbuffer=no tos=lowdelay [voipjet] type=peer host= xxx.xxx.xxx.xx secret= xxx auth=md5 notransfer=yes context=incoming disallow=all ;

Hello all, Can someone send me a current working example of what the entries need to look like for iaxtel and the iax.conf file inclusive of the register line? It's been quite awhile since I have done anything with iaxtel and I need to do a little bit of testing. Currently it appears that I can make calls out to iaxtel fine however inbound seems to be another question. I see 2 iaxtel

I've searched WIKI and Archives but nothing. Im getting: -- Called username:password@iaxtel.com/1800somenumber@iaxtel Jun 21 17:04:12 WARNING[1158883520]: chan_iax2.c:5097 socket_read: Call rejected by 69.73.19.178: Unable to negotiate codec -- Hungup 'IAX2[Iaxtel]/8' == No one is available to answer at this time -- Executing Hangup("SIP/104-b8eb", "")

I have tried for over a month off and on to get iaxtel for inbound to work... and tonight after alot of troubleshooting we noticed this: iaxtel inbound will use the last entry in your iax.conf to auth against. So if [iaxtel] is at the top and say [voicepulse] at the bottom. An inbound call will try to auth against that [voicepulse] entry even with the [iaxtel] entry at the top of the file. Has

Is anyone else having trouble receiving IAXTel calls? I don't know if it's my config that's broken or IAXTel that broken. Several people have given me their IAXTel numbers and calls to them all fail. I can call FWD numbers via IAXTel just fine. --Eric -- Sample configs, scripts, more : http://www.fnords.org/~eric/asterisk/ BTEL Consulting 504-899-1387 or 850-484-4545 or

On Sun, Aug 17, 2003 at 03:44:21AM -0500, Gnophone Support wrote: > Hello, and thank you for registering at gnophone.com. Your login > information is listed below: > > Username: miernik > Password: ******* > IAX Phone Number: 17002916107 > > Please login as soon as possible to > http://x.linux-support.net/directory/ to complete the

Is anyone other than me having trouble dialing out via IAXTEL? I havn't changed my config files in weeks but seems that IAXTel calls (800 and FWD) stopped working in the past week sometime. Robert

Hi all, I spent most of the last weekend testing and trying to diagnose some mostly incoming call issues. I'll start with the easy one in the hopes it might have a positive impact on the others. First- I have an account with IAXTel. I can place calls to other IAXTel subscribers and also through IAXTel to landline toll free numbers and all works great. iax2 show registry shows I am

Does anyone know if the 1-800 iaxtel gateway is down? I've been trying to use it all day today and asterisk says it's ringing: Channel (Context Extension Pri ) State Appl. Data IAX2[iaxtel]/1 ( s 1 ) Ringing AppDial (Outgoing Line) SIP/2201-a253 (home 18888476626 1 ) Ring Dial IAX2/XXX:YYYY@iaxtel.com/18888476626@iaxtel But I

Last night Mark and I made some changes to the IAXTEL tollfree outbound, and inbound access. The inbound access number has changed to: 248-724-0700. (This number is in Pontiac, MI Ratecenter, and is supplied by Telesthetic LLC, a next gen phone compnay) This number will say "Please dial your number now" at that point you can dial your 1-700-XXX-XXXX IAXTEL number assigned. In the

I didn't get any response at all to my last "request for status" on IAXTEL. So, when this happens, I attribute it to one of a number of things: 1. No-one knows. 2. No-one cares. 3. Everyone knows, but are too busy to reply. At any rate, my investigative side kicks in and I began searching thru the digest's I've gotten, looking for references to IAXTEL. Mostly it is

Is iaxtel down? Ive been getting this: May 21 19:23:42 NOTICE[29984]: chan_iax2.c:2782 auto_congest: Auto-congesting call due to slow response -- IAX2/Iaxtel-12 is circuit-busy -- Hungup 'IAX2/Iaxtel-12' is it down or am I doing something wrong?