similar to: newbe Echo problem

Hi all, I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :) I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway ISDN line. I'm pretty certain the card and line both work since they've been used in this machine for PPP before this (but with an older kernel with DoV

Hi all, I'm experimenting with Asterisk on linux using an Eicon Diva 2.01 S/T PCI card. I'd set up the card using the hisax driver and isdn4linux (titled as "Old ISDN4Linux (obsolete)" in the 2.6.12 kernel. I can make SIP calls and outgoing phone calls as well, but gathered a few problems on my way: 1. Plain SIP calls using softphones on windows clients work fine not counting

Hi! I have some (short) question about the Eicon DIVA (V-)4BRI cards I want to have (short) answered before buying the DIVA card. I know there are several Eicon guys active on the list, thus I ask on the list instead of directly to Eicon so that all other will benefit as well. 1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode? 2. Can the clock (master/slave) be configured independent

Sorry for a slightly off-topic question, but I'm getting desperate. I tried to use asterisk to talk w/ ISDN line and tracked the problem to i4l. I have a Diva PCI 2.02 (S/T) card and am running RH8 w/ 2.4.20 kernel (first version that supports the 2.02 w/ hisax driver). The switch is a 5ESS running NI-1 protocol. The card sync's up and reports other traffic on the line, but fails to

Hi, Anyone using ISDN4Linux (Eicon Diva Hisax ) card. If yes, please help me out. After configuring extension.conf and modem.conf I could make outward calls correctly from gnophone and kphone. Still the inward call to the configured MSN is correctly reaching Asterisk and also to the configured Context. But the issue is, it was hanging on 'Answer' application and throwing out

-------- Original Message -------- Subject: Answer App hanging in I4L Date: Tue, 25 May 2004 13:49:50 +0530 From: Murali Krishnan <murali@bksys.co.in> Reply-To: ismk@myrealbox.com Organization: bk SYSTEMS (P) LTD., To: asterisk-users@lists.digium.com Hi, Anyone using ISDN4Linux (Eicon Diva Hisax ) card. If yes, please help me out. After configuring extension.conf and modem.conf I could

In this message I try to summarize what I have learned in these last two weeks. My primary sources of informations were the * list archives and linux ISDN docs. I ain't no * master, so don't trust too hard. Relevant messages from the * list for the current discussion are: 009177.html 009268.html 0498.html 0849.html My setup is an Eicon Diva (HiSax: Eicon.Diehl Diva driver Rev. 1.1.4.2)

I have * with i4l installed and working - on a dumb eicon card. It seems in order to get DTMF out of the BRI (for business banking - etc) - I should change from i4l drivers to capi drivers. wiki help seems to be for the Fritz card only...??? I have ticked the suggested boxes in 'menuconfig', explored the capi4linux websites - etc... but am missing some magic. I've "modprobe

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello! After LOTS of research on this list and internet in general I managed to get an old Teles PCI card working with Asterisk throught ISDN4Linux. No echos, no delays, simply perfect -- electronic poetry ! :) eheheheheh I just didn't get it to work with CAPI and "chan_capi" but, since isdn4linux is doing such a good job, I'll

Hi After modprobe hisax type=35 (Billion HFC PCI) on a Xorcom Rapid ISO I get: HISAX Dec 12 16:25:35 localhost kernel: HiSax: Linux Driver for passive ISDN cards Dec 12 16:25:35 localhost kernel: HiSax: Version 3.5 (module) Dec 12 16:25:35 localhost kernel: HiSax: Layer1 Revision 1.1.4.1 Dec 12 16:25:35 localhost kernel: HiSax: Layer2 Revision 1.1.4.1 Dec 12 16:25:35 localhost kernel: HiSax:

Hi list, Does chan_capi work with kernel 2.6? The Eicon Diva server card loads fine judging from /var/log/messages but Asterisk gives an error when trying to load the chan_capi module. I'm using chan_capi-0.3.5, zaptel-1.0.0, libpri-1.0.0 and asterisk-1.0.0 on a Fedora box with kernel 2.6.8-1.584. Zaptel and ilbpri work fine as does *. I have seen a msg that may be related and don't know

Hi, Just installed Asterisk+samples from yesterday's cvs with an ISDN card (passive, Cologne HFC chipset, HiSax driver). When I leave a voicemail for extension 1234 the echo is horrible. Is there a way to reduce the echo in this setup? Probably buying a decent card like an Eicon Diva PCI and use chan_capi drivers with echo_cancellation=on would improve things but I do not have that card

hi i would like samples examples to configure with isdn4linux i have hisax card : "gazel" and an ISDN(BRI) line (2 channels B and 1D) In fist time i'll use "sjphone" only Perhaps there is french people on this list who can help me to do first steps with "Asterisk" thanks

Hi, I'm trying to get an Eicon Diva Server4BRI card running under Ubuntu 6.06 - by downloading the v3 driver package from Melware and compiling everything. Yet, after activating the necessary modules (divas and divadidd) and interactively configuring the card (/usr/lib/divas/Config), starting up the adapter fails! The error "/usr/lib/divas/divactrl load -c 1 -Debug" produces

Hello, I acquired a Diva Server 4BRI for an AsteriskPBX system and installed a 2.4.20 kernel modified with the latest eicon capi2.0 support from www.melware.net. Capi support seems to work fine: Asterisk+chan_capi answers the calls. However if I try to use my old isdnutils apps by loading a i4l compatibility layer then I have the following problems: - if I use the diva2i4l module and start the

hi, i just found a page on the net which might me worth some lines. for the urgent reader: http://isdn.jolly.de there is a guy in germany who has successfully programmed a gpl-patch for isdn4linux to make isdn cards with the hfc chipset from cologne chip (http://www.colognechip.com) run in the NT mode (up to 2.4.20). this mode is needed to connect isdn device to a pc and enables the use of

Hello, Does anyone know what driver to use with an "Eicon Diva Server 4BRI" card? My modem.conf: -------------- [interfaces] context=remote driver=i4l msn=16453 device => /dev/ttyds01 -------------- I get the following error: -------------------------- == Loading modem driver chan_modem_i4l.so => (ISDN4Linux Emulated Modem Driver) WARNING[8192]: File chan_modem.c, Line 383

Hello, I try to use Asterisk with an Eicon-card called "DIVA Server 4BRI-8M PCI" but I don?t get it to work. I?m running on RH8.0. The Eicon-card supports isdn4linux. In the modem.conf file i have put following: ----------- [interfaces] ; By default, incoming calls should come in on the "remote" context context=remote ; Modem Drivers to load driver=i4l ; Type of dialing

Hi, currently I got the following problem: The system contains a HFC-PCI card, it's running without problems under zaphfc. Now this system also should send/receive faxes. Receiving faxes works with rxfax (spandsp) but txfax is not comfortable enough and doesnt bring the demanded results. So an older external ISDN modem and mgetty-sendfax is used for sending faxes. I'd like to send the

Hello, I am trying to use 2 netjet cards under asterisk and isdn4linux. I am having a hard time trying to get them to work in terms of dial out. Does anyone have a working config I could look at for even one card (tried that, not much luck either). When i dial out: -- Accepting AUTHENTICATED call from 172.16.11.2, requested format = 2, actual format = 2 -- Executing