similar to: Fax Detection

Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the suggestions in those threads, but still have the same problem. I'm using the CVS Asterisk from July 11, 2005. Redhat FC2 SpanDSP 0.0.2pre18 Libtiff 3.5.7 Digium PCI card 1 FXO, 1FXS. I have a single POTS line coming, but I have 2 numbers and am using

Hi, I have one Q: why doesn't work h-extension in macro? I want to setup fax macro, to send tif-file after fax channel hang-up, but h-extension doesn't work in macro, so I must put them to global context. But in this setup, exten => h,1,system(/var/lib/asterisk/bin/mailfax ${FAXFILE} ${EMAILADDR} "${CALLERIDNUM} ${CALLERIDNAME}") mailfax binary will be executed after any

Hello All, I am looking to get asterisk to receive faxes but I really don't know where to go from here, any help pointing me in the right direction would be great. What I would really like is for this second line to answer faxes, but if a user typing in an extension it goes to that extension but I need to get the fax working first. Error I get when I turn on Fax conf... pbx.c:1945

Hi, I'm trying to setup a system where incoming faxes are received using SpanDSP and then send on to another (remote) fax machine. The SpanDSP part is working excellently, however I dont seem to be able to get the forwarding part to work. Heres what I put into my extensions.conf: exten => s,4,Answer() exten => s,5,Set(FAXFILE=/tmp/fax-${UNIQUEID}.tif) exten =>

Maybe I over-complicated my question with the mailfax part. If I leave the mailfax step out entirely, then there should be a .tif file, right? But there's not. No tif file gets created at all. Permissions on the fax folder are 777 at the moment. Thanks for the responses so far. /Rob -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have managed to get spandsp working, and if I dial a specific extension I can receive faxes. WhooHoo. However, I was wanting to use the "fax detect" option in order to allow individuals to receive faxes, but can't get that to work. Given the following extensions (mainly copied from examples on the wiki), why is the call simply passed onto the sip device rather than being

Hello All, I have downloaded and installed spandsp and downloaded rxfax, etc and rebuilt asterisk with app_rxfax. I have added the following to my extensions.conf: [macro-faxreceive] ; ${ARG1} - sendto e-mail exten => s,1,Wait(2) exten => s,2,Answer exten => s,3,SetVar(FAXFILE=/var/spool/asterisk-fax/fax-${MACRO_EXTEN}-${TIMESTAMP}) exten => s,4,SetVar(EMAILADDR=${ARG1}) exten =>

How should be the macro rewritten? [macro-faxreceive] exten => s,1,Set(FAXFILE=/var/spool/asterisk-fax/${UNIQUEID}.tif) exten => s,2,DBGet(EMAILADDR=extensionemail/${MACRO_EXTEN}) exten => s,3,rxfax(${FAXFILE}) exten => s,103,Set(EMAILADDR=ronald@elmit.com) exten => s,104,Goto(3) ... [Jan 23 10:43:38] -- Executing Macro("Zap/3-1", "faxreceive") in new

Hi folks, I am having a small problem with asterisk-1.6.2.7 + app_fax on OpenBSD 4.7 -release. Everything seems to work fine. I have a macro which answers, receives the fax to a tiff, and then runs a script (mailfax) to convert that to pdf and email it. It all works perfectly except for some errors I am seeing in the console. After it hangs up I get a dozen or so messages in the cli

I haven't seen much activity on the list concerning Digium's IAXy standalone FXS device. Are they worth $100 ? Do they integrate well with * as an extension's FXS ?

I'm trying to send a fax to my asterisk box, however shortly after connecting the fax machine reports a "communication error" and hangs up. Below is the error I get from RxFax: Fast carrier training failed Nothing is written to the file system as far as the tiff is concerned. Any ideas on how to fix this? Thanks ---- Sending Fax Machine: HP PSC 2000 Series 2210

Hi, I have got my Asterisk server running with TDM400 card (2xFXO & 2xFXS). I originally had the system configured with a Panasonic fax machine on one of the extensions. Due to the high volume of fax spam, I figured it would be a much better idea to capture the faxes as TIF or PDF files to minimize wasted paper, etc. I have downloaded, compiled and installed spandsp and can see the rxfax

I'm trying to get a basic Asterisk configuration together for ISDN incoming / outgoing calls. I have two Cisco 7905g phones working (at least talking to each other) and have purchased a NETjet-S PCI ISDN card for routing calls to / from ISDN. The state I've managed to get it to is:- -- Executing Ringing("SIP/PHONE2-d557", "") in new stack -- Executing

Hello, Please be conscious of Digium's bandwidth and use a Mirror when downloading 1.0. I have mirrored the tarballs at: ftp://ftp.nacs.net/asterisk/ Direct links: ftp://ftp.nacs.net/asterisk/asterisk-1.0.0.tar.gz ftp://ftp.nacs.net/asterisk/asterisk-sounds-1.0.0.tar.gz ftp://ftp.nacs.net/asterisk/libpri-1.0.0.tar.gz -- Vice President of N2Net, a New Age Consulting Service, Inc.

Hello I'm trying to install Dahdi through source code on a Fedora 13 host to use an OpenVox PCI card with a single FXO port, but dahdi_cfg -vv isn't happy. 1. After successfully running "make all; make install; make config", I edited /etc/dahdi/system.conf thusly: loadzone=fr defaultzone=fr fxsks=1 2. Then ran "dahdi_cfg -vv" which says: ------------- DAHDI Tools

Hi all! I'm new with telephony cards and DAHDI drivers. I have installed Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too. I'm following the installation guide of Atcom [1] for AX1600P analogic card, modules are loaded [root at pbx ~]# lsmod | grep -E "hisax|netjet|dahdi" netjet 14618 0 isdnhdlc 4523 1 netjet mISDNipac

Hi, I have done my best and tired of searching the net about the problem. If anybody could help would be a great favour. Description of Problem ------------------------ I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture manual. After installation dmesg

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091111/2b828eff/attachment.htm -------------- next part -------------- Hello. I am trying to execute an fax reception script and i am getting the following: [Nov 11 08:40:52] WARNING[12800]: app_system.c:88 system_exec_helper: Unable to execute '/var/lib/asterisk/scripts/mailfax ""

With the following program: #!/bin/sh # mailfax: program to email received fax as pdf FAXFILE=$1 RECIPIENT=$2 FAXSENDER=$3 FAXID=`basename $1|cut -d "." -f1,2`.pdf FAXTXT=`basename $1|cut -d "." -f1,2`.txt tiff2pdf $FAXFILE > $FAXID sendfax.pl $FAXID $RECIPIENT $FAXSENDER $FAXFILE #end of program If I execute the following from the command line: mailfax

Hello, I'm trying to receive faxes with asterisk. My configuration is like this: PSTN fax -> ISDN -> Cisco router with VoIP module -> Asterisk When I try to send a fax from PSTN fax I got the standard fax signal, Asterisk starts rxfax application and then call ends and there is no tif anywhere. On the fax display there is still one message: Calling... Part of my extensions.conf: