similar to: Message Waiting on Cisco 7960

I have a cisco 7940 with the following sip.conf config: [Desk1.1] type=friend secret=****** defaultip=192.168.1.14 insecure=no mailbox=102 callerid="Desk1.1" qualify=500 canreinvite=no context=extensions host=dynamic group=2 I do not get message waiting indicator (mwi) on this phone. Is the another .conf file invilved in configuring this function other than the mailbox=xxx in the

Hi everybody Could someone give a tip on how can I configure asterisk to use 2 ATA's 186 to communicate each other using SIP with asterisk. I know this most be a very simple task, however this is the very first aproach I have to asterisk. I set the following config but I don't get dial-tone when I off-hook the phone from any of the two ATAs. Can some one tell what I'm missing in

I have several (various brand) sip devices with static IP's. I understand that asterisk will not accept a registration from these devices if the host= parameter is not set to 'dynamic' in sip.conf. I want calls to these extensions to be routable even before the device registers. I understand that is what defaultip= is supposed to do, but it doesn't work. I get a busy tone when

We would like to setup in house SIP phones with numbered extensions for demonstration purposes. What is the syntax to associate a extension with SIP phone? Does the Dial application have a SIP specific entry for example: Dial,SIP/SIPphone/s|15 When I call from one extension to another I get "User is on the phone". We also have Cisco7960s to test. Currently Have X-Lite setup.

incominglimit is already implemented for SIP. Just specify under the endpoint how many incoming connections are allowed. For example, [cisco] type=friend username=cisco secret=blah nat=yes ; This phone may be natted host=dynamic canreinvite=no ; Cisco poops on reinvite sometimes qualify=200 ; Qualify peer is no more than 200ms away

I did some searching in the archive, but found only one message with this same question and no answer. Hopefully it's a simple config problem. When the Caller-ID is delivered, it is surrounded by double-quotes, like this: "ATA-57 1" On long caller-id strings, the last character is cut off to make room for the leading double-quote: "BudgeTone 1234 instead of BudgeTone

Hi, I?m trying to get app_festival to work. I got the source from the Debian woody package of festival-1.4.2 and applied the patch that came with * sources it applied fine; then I made the debian package and installed it. I have this on extensions.conf: exten => 6700,1,Festival(Hi there how are you doing ?) When I dial 6700 I hear nothing and then * hangups: -- Executing

I've been googling and talking with Libretel about my setup and the fact that incoming calls to my asterisk box through the Libretel number reach my box (I hear the greeting being played) but then don't accept DTMF. Here is a rough diagram of my setup: Asterisk | server | NAT <------------ Libretel | router | Note that there are NO SIP

Hello, Hope everyone is enjoying their holiday! We setup two asterisk servers (From CVS on Wednesday) and set up IAX between the two. Right now they both reside on a switch with a static 192.168.0.x IP address. The first Server is .5 and the second is .30. Our dialplan seems to be working, however on the console we get a flurry of NOTICE and WARNING messages. NOTICE[1116941120]: File

Hi, I have just upgraded my Cisco 7960 phone to SIP firmware today and I have to say it's working great with Asterisk. At work (which uses Cisco Call Manager), when a voicemail is recieved the read light remains lit until the voicemail is retrieved. Is there any way to achieve the same effect with Asterisk ? Thanks, Paul. -------------- next part -------------- An HTML attachment was

http://sipp.sourceforge.net/ Anyone care to throw this at Asterisk to see what happens? I would, but I am having significant temporal shortfalls recently due to the apparent warping of the space/time continuum when I answer the phone with clients/associates. It seems that entire days pass by before I hang up... very odd, and very counter-productive to getting good Asterisk work done. JT

I am running asterisk 1.0.1 with OH323 compiled in. We have a 323 trunk to CallManager with a mgcp controlled pri router. When using sip phones (directly registered with asterisk) to call out the 323 trunnk to PSTN, calls timeout after 3 rings. If I answer b4 3 rings - no problem, otherwise I get "no one is available to answer at this time" on the consoel and it redirects to an

Hi guys, I'm running Asterisk-0.5.0 and accidentally stumbled on this problem while in the VoicemailMain2 application: If you login to it, or even if you call it w/ 's<extension>' to skip the login and press an '8' near the beginning (and possibly at any point, I'm not sure), the channel seems to lockup, even if the handset is hungup, the channel remains frozen

I'm confused a bit about the following and was hoping to get some answers on this group - What is exactly implied when we say asterisk can connect to a PSTN. Does it mean connecting to the PSTN via PRI/T1/E1? If yes, then I assume asterisk does not need to do any SS7 signaling and all it does (playing the role of a PBX) is to connect to a Class 5 Switch at the CO. Is this a correct statement?

Hi, I just setup my * with digium. I started testing voicemail first between atas, and i am not sure why it is not prompting me any when the call is not answered or if busy. i only get continuous ringback and the following message: asterisk*CLI> -- Executing Dial("SIP/6882332-1697", "SIP/5104112978|20|tr") in new stack -- Called 5104112978 --

Sirs, Thank you for your quick response. But when i try to make a call to FWD the following error appears: For example, when i call to 612 (a service number of FWD) -- Executing Dial("SIP/Phone4-e85b", "SIP/612@fwd.pulver.com|90|Ttr") in new stack -- Called 612@fwd.pulver.com -- Got SIP response 500 "I'm terribly sorry, server error occured (1/SL)"

Hi, For MGCP users. Is there any success stories with any MGCP IAD vendor. I?m trying to find an IAD which works with Asterisk. I?ve tried the Cisco IAD 2430 without success; but SIP on this IAD works but it?s limited (no authentication, no notify messages, etc) and with higher density IAD (16 or more ports) it?s nice to control using MGCP. Any information will be apreciated ! Thanks. --

Hi, After reading this valuable forum and the voip-info wiki and follow all the steps , but my Cisco 12SP+ remains unregistered. These are my config files: skinny.conf [general] port = 2000 ; Port to bind to, default tcp/2000 bindaddr = 172.20.1.1 ; Address to bind to dateFormat = D-M-Y ; M,D,Y in any order (5 chars max) keepAlive = 120 languaje=es allow = all ; disallow

I know that Asterisk supports DID, but does anyone have documentation on how to write the configuration for it? I'll be trying to setup a hybrid system where some incoming numbers will be DID enabled and others won't, so I'll need to be able to sort between the two, i.e. directly connect the DID dialed numbers and route the others to an autoattendant for extension dialing.

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing