similar to: ISDN Dialout

Hello! How can one select outgoing MSN when dialing out from ttyI-interfaces? I have successfully done this with CAPI e.g... exten => _XXXXX.,2,Dial,CAPI/60:bBYEXTENSION ...in extensions.conf. Currently correponding for my ISDN modem interface is... exten => _XXXXX.,2,Dial(Modem/g1:${EXTEN}) ...but this selects only MSN of outgoing group g1 for dialout MSN number. I also tried to

Hi all, I compiled/installed chan_capi.so without problems. When I launch Asterisk, I get the following error: --- [chan_capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338 mkif: ast_capi_pvt(91xxxxxx,*,pstn,0x2,2) (1,2,64) (0)(0.800000/0.800000) 0 Mar 30 19:47:52 NOTICE[16384]: chan_capi.c:2338

Hi, i install the Asterisk PBX on a linux machine with i4l to connect to PSTN (EuroISDN). And i configure a very simple dial plan in extension.conf. After this, i connect with a SIP program to asterisk and would call my cellular phone, but got this error: -- Executing Ringing("SIP/ACzerniak-0904", "") in new stack -- Executing Dial("SIP/ACzerniak-0904",

Hi there, I searched in mailinglist and in web, but no answer to my problem... Only this post with no answers: http://lists.digium.com/pipermail/asterisk-users/2004-March/038994.html I'm using CVS Asterisk (05/17/04) with chan_capi 0.3.1. (multiple controller support). In my Asterisk-box there are 2 Fritzcards (module for second card compiled with changes on sourcecode found in the web).

Hi, I've got a big problem. I have 2 ISDN cards windbond I can make calls from sip phones on ISDN lines but only from one card channel B1 to isdn phone, and what ever ttyI* I choose only one of cards is choosen. How to bind /dev/ttyI to another ISDN card? Kind Regards, C. ---------------------------------------------------- Premiera filmu na DVD o ?yciu intryguj?cej Marleny Dietrich.

Hi all, i 've written a little Callgen script for generating calls through the outgoing spool directory. The calls goes over 8 ttyI devices to another pbx and come in through other 8 ttyI devices. But when i generate the calls, sometimes * register the calls but never initiate them. Especially when the files come to fast into the outgoing dir. What can be wrong ? Is it possible that the

Hello! Im pretty new of asterisk world: my goal would be using iaxcomm to call ppl over POTN. Yesterday i configured asterisk to be able to hear a song (with Playback() command) with iaxcomm, and it was wonderful. Now, today i tried to configure asterisk to use my ISDN4Linux supported card (a plain HFC card) with asterisk. i configured modem.conf this way, after reading

Hello, i have asterisk with 2 internal isdn cards - handled by isdn4linux and i need to setup whol system like this route some call beggins with 0 or 00 - long distance through first card, route calls to mobile network via second card ( tehere is isdn gsm gateway connected).how i can do this using only isdn4linux (/dev/ttyi) ? regards Marian -- SUNTEQ s. r. o. Bojnicka cesta 35 # Prievidza

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there, i'm in debian sid 3.1 with kernel 2.6.7, * last cvs & chan_capi 0.3.4b; nt1+ with 2 bri in ptmp (http://www.voip-info.org/tiki-index.php?page=DDI) i tried to install avm c4 following step by step http://www.voip-info.org/tiki-index.php?page=Asterisk%20How%20to%20connect%20with%20CAPI step 1. i compiled capi 2.0 support in kernel

Hi, For the project I've used the Eicon DIVA card. It has 8 BRI ports, and for about 25% of the time there are 7 or 8 in use. So we want to replace it with an E1 card. Only issue is, replace it with what? The idea we have been playing with was to get a Digium E1 card (we already have bought lot of Quad E1 cards :-) and then just put it back to back against Asterisk server. And instead of

configuration ISDN BRI card : ISDN Olitec PCI 128 (hisax gazel) internet connection by ISDN 64kb/s dynamic IP nom de domaine registered to : dyndns.org avec ddclient to register IP par ddclient asterisk (on internet gateway) configuration pour ISDN BRI par virtual modems /dev/ttyI* (modem.conf) logical telephone SIP "SJPHONE" on 2 local stations "windows" (i don't succeed

Hi all, is it possible to make a queue for outgoing calls? That's for preventing "Device '/dev/ttyI 0' is busy" error when having only one line to dialout and many files in /var/spool/asterisk/outgoing folder. So it would call only one call at the time and when it's done it would move to next. Thanx in advance. ~pete

Hi, currently I got the following problem: The system contains a HFC-PCI card, it's running without problems under zaphfc. Now this system also should send/receive faxes. Receiving faxes works with rxfax (spandsp) but txfax is not comfortable enough and doesnt bring the demanded results. So an older external ISDN modem and mgetty-sendfax is used for sending faxes. I'd like to send the

If this handles the case where 10 digits are required: exten => _9NXXXXXXXXX,1,StripMSD,1 exten => _NXXXXXXXXX,2,Dial,Zap/4/BYEXTENSION How do you create a handler which works for either this or the case with a leading '1' plus 10 digits? tnx -kim -- w8hdkim@gmail.com

Hello, I am new to Asterisk, so RTFM answers welcome too (just include the FM's link :). I'd like to build a simple dialout server based on Asterisk. I installed 0.4.0 from package (a Debian SID machine, "server"). The client is gnophone (a Debian SID machine too, "client"). My modem is a GVC 56k voice modem connected to the server's serial port. I modified

Simple code motion. --- v2v/Makefile.am | 2 ++ v2v/input_disk.ml | 21 ++------------------- v2v/name_from_disk.ml | 41 +++++++++++++++++++++++++++++++++++++++++ v2v/name_from_disk.mli | 24 ++++++++++++++++++++++++ 4 files changed, 69 insertions(+), 19 deletions(-) create mode 100644 v2v/name_from_disk.ml create mode 100644 v2v/name_from_disk.mli diff --git a/v2v/Makefile.am

hi when two calls are active on controller 2, chan_capi won't use controller 1. this is with AVM C2 roy -- Executing Goto("SIP/torgeir-b476", "capiring|BYEXTENSION|1") in new stack -- Goto (capiring,90044875,1) -- Executing Dial("SIP/torgeir-b476", "CAPI/22545066:bBYEXTENSION|120|Ttr") in new stack == data = 22545066:b90044875 ==

I have a list of suffixes I want to turn into file names with extensions. suff<- c("C1", "C2", "C3") paste("filename_", suff[[1]], ".ext", sep="") [1] "filename_C1.ext" How do I use lapply() on that call to paste()? What's the right way to do this: filenames <- lapply(suff, paste, ...) ? Can I have lapply()

In disk input mode, to determine the guest name strip the extension from the filename only if it's a very well extension for disk images. --- v2v/input_disk.ml | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/v2v/input_disk.ml b/v2v/input_disk.ml index 17ad61d..d56c476 100644 --- a/v2v/input_disk.ml +++ b/v2v/input_disk.ml @@ -42,9 +42,23 @@ class

I tried to setup an PBX System with the following parties: 1. SIP Phones 2. One AVM ISDN Card with CHAN_CAPI for Outbound dialing and receiving external calls 3. One HFC-S PCI Card in NT-Mode with ZapHfc for physical ISDN Phones. 1+2 work perfect I have problems with part 3 Card is working, drivers loading fine, asterisk initializes chan_zap without problems. Demo did work. My problem is