similar to: Web Voicemail Permissions

Howdy, I am playing around with asterisk within an LXC container on Ubuntu 11.04. I have asterisk (1.4.42) running fine, but want access to dahdi_dummy for timing (meetme). I have dahdi installed on the "host", and dahdi_dummy is loaded: root at astnorth:/# ls -ltr /dev/dahdi total 0 crw-rw---- 1 root root 196, 250 2011-06-08 13:59 transcode crw-rw---- 1 root root 196, 253

Hello, In setting up * for my company's office and remote employees, I have a question about how to log one username into * as either a SIP account, or IAX account. For example, we will be using SIP phones in the office locally to the * server, however some employees travel, and want to use IAX (as it's much friendlier with firewall/proxy setups than SIP) clients on their notebooks.

I was wondering if anyone is able to use the three way calling features from their telco on the incoming FXO lines to transfer a caller back out to say a cell phone. I am currently moving from a Talkswitch to the Asterisk PBX and one nice feature they have is after 4 rings or so I can have the call transferred to my cell phone using the same line it came in on with three way calling. Just

Hi. rsync 3.0.8 FreeBSD RELENG_4 i386. rsync -Haxi --delete /.../ /.../ The first pathspec above (residing on zz, a full filesystem) is: /vvvv/wwww/xxxx/zz/ The second pathspec above (residing on yyy, an empty filesystem) is: /vvvv/wwww/xxxx/yyy/zz/ It's obviously a 'copy everything over' operation. I've had to obfuscate the pathnames, however the exact pathlength throughout

[root@server ~]# modprobe zaptel [root@server ~]# modprobe wcfxo ZT_CHANCONFIG failed on channel 1: No such device or address (6) FATAL: Error running install command for wcfxo [root@server ~]# ztcfg -vvv Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. ZT_CHANCONFIG failed on channel 1: No such device or address

This is a new installation. Here are the specs of my system: Linux asterisk 2.6.21.5-smp #2 SMP Tue Jun 19 14:58:11 CDT 2007 i686 Intel(R) Xeon(R) CPU E5420 @ 2.50GHz GenuineIntel GNU/Linux 08:08.0 Ethernet controller: Digium, Inc. Unknown device 8000 (rev 11) (ethernet?? first time with a card like that for me) dmesg Zapata Telephony Interface Registered on major 196 Zaptel Version:

Hi all, this is another post about this problem. I installed from scratch a new Suse Linux 10.0, with latest stable asterisk. Moreover I add the lines to /etc/udev/rules.d/50-udev.rules, in order to let the driver create the /dev/zap....... When I plug into usb port my TigerJet adapter, I see on /var/log/messages Feb 24 14:55:02 srvlnx05 kernel: usb 1-2: new full speed USB device using

Hi, I'm using zaptel-1.2.22.1 with asterisk-1.2.10 and following steps to make zaptel working... OS is gentoo linux 2006.1 Hardware: --------- 0000:05:01.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device 8085:0003 Flags: bus master, medium devsel, latency 32, IRQ 22 I/O ports at b400 Memory at ff900000

Hello System: Debian etch with kernel 2.6.18-4-686 or 2.6.18 custom. Asterisk Version: SVN-branch-1.4-r55483M Zaptel Version: SVN-branch-1.4-r2302 modules all ok in compilation time. And modules loaded: ztdummy 5928 0 rtc 13364 1 ztdummy zaptel 181540 1 ztdummy crc_ccitt 3200 1 zaptel In /dev/zap directory I have:

I have had a TDM400 with 2 FXO and 2 FXS working for ages (>12 months). It has stopped working. All four green lights are still lit. I have rebuilt zaptel and asterisk and restarted but the problem persists. /sbin/ztcfg -vvvv Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03:

I installed TDM400P and X100P pci cards in a system running mandrake 10.1 official, kernel 2.6.8.1-12mdksmp. I can compile zaptel, libpri, asterisk and modprobe (zaptel, wcfxs, wcfxo) without errors. Except that running ztcfg and asterisk fails. [root@asterisk asterisk]# ztcfg Notice: Configuration file is /etc/zaptel.conf line 3: Unable to open master device '/dev/zap/ctl'

All of sudden my FXS module is not working. I have a TDM card with one FXS and one FXO, FXO module seems working fine. I also noticed the LED is not on for my FXS module while it is on for my FXO module. Sep 13 12:11:44 WARNING[9870]: chan_zap.c:887 zt_open: Unable to specify channel 1: No such device Sep 13 12:11:44 ERROR[9870]: chan_zap.c:6612 mkintf: Unable to open channel 1: No such device

G'day list, I am getting a lot[1] of traffic on my Internet link, ICMP messages from 69.73.19.178 telling me UDP port 5036 is unreachable (this IP address belongs to iaxtel.org). I see from the wiki that IAXtel supports only IAX2 from December 2003. Fine, however it looks like my * still wants to try and register using IAX1, and I can't find how to turn this off. This situation is

Hi, I'm trying to install asterisk on Dell power edge 2800 running Fedora core 3. I don't have have any zaptel cards, so trying to use ztdummy. /dev/zap is successfuly created... but I see some problems while starting asterisk ... chan_zap fails to load. Can somebody please help me in overcoming this problem. I was able to run asterisk on other normal PCs running Fedora core 3. Is this

Hi, I'm cutting my teeth setting up a home asterisk server, but having some trouble getting Zaptel to recognize a X100P clone PCI (Motorola SM56 which should work according to various wiki's). What struck me was that the "/proc/interrupts" do not include IRQ 11 as the "lpcpi -v" is reporting. Am I missing something fundamental here? Any hint is greatly

Hello, I'm trying to set up a conference room. When I dial it's extension, I get an audible error saying "Not a valid conference room, please try again" followed by a disconnect. I've got debug sip peer 1001 (my X-Lite client) and I see this in the logs: (I'm pretty sure it has something to do with ztdummy, but I dunno... I have the port installed, but I

When I try to start up zaptel, whilst running ztcfg, I get the following error: Jan 1 10:48:18 bu ztcfg: ZT_CHANCONFIG failed on channel 2: No such device or address (6) My /etc/zaptel.conf is: fxsks=1 fxoks=2 loadzone = au defaultzone=au Channel 1 is a X101P card connected to the PSTN and channel 2 is a S100U box driving an analogue phone. The zaptel kernel module gets loaded OK as does the

I am getting quite frustrated today, so please bear with me. I just installed Fedora Core 4 (was running RedHat 9 with a working Asterisk) now my Fedora does not appear to be recognizing my X100P (clone) at all. Hardware browser just shows them as unknown device. driver: hisax So, of course, my zaptel drivers do not work and therefore my asterisk does not work. any help would be greatly

Folks, I have a Xen Asterisk VM with a TDM400 card. When I try to run dahdi_cfg, I get: tempest:~# dahdi_cfg -vvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 01) Channel 03: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 03) Channel 04: FXS

Hi all, on a new installation, HP Xeon at 1,83 with 2.6.18-amd64 image from Debian Etch with Asterisk 1.4.20.1 and zaptel 1.4.11 -both tar.gz from digium- we get: [Jun 11 14:54:29] ERROR[6686]: asterisk.c:2952 main: You have Zaptel built and drivers loaded, but the Zaptel timer test failed to set ZT_TIMERCONFIG to 160. There is no telephony card in the server, we want to use ztdummy for