similar to: Help with ISA PhoneJack.

Hi, I am a newbie in asterisk, i could compile it and run it with no problem on a RedHat 9. In the same box, i got a linejack and a phonejack cards and i downloaded the CVS driver from quicknet. This 2 card were working in a openh323 (openphone and pstn) project with gnugk on a RedHat 9. I am using the default samples, and i tried /dev/phone0 and /dev/phone1, but when i run asterisk, i get this

Hi all, I am still confused about the way to use asterisk with QuickNet Phonejack. If I am not wrong, The phonejack card should be using the phone.conf as the asterisk channel. I was initially confused with the ZAP channel (The digium card), now that I have found out that Phonejack should use the Linux Telephony Devices and its configuration file is phone.conf, but the question is I do not know

Hi, I'm having problems with setting up my ISA LineJack card on Linux machine... I've done everithing according to documentation available, by compiling the new ixj driver (v1.2.1), loading it, adding device node /dev/phone0 with major number 100 and minor number 0, adding aliases into the /etc/modules.conf: alias char-major-100 phonedev alias char-major-100-0 ixj and running depmod

Hi list, I have some problems to get the QuickNet Internet PhoneJack working. What .conf files do I have to edit to get a dialtone for the first test with the standard configs from asterisk? I have the ixj driver running and a cat /proc/ixj after asterisk start tells me one reader and one writer. But if I pick up the receiver I don't get a dialtone nor I'm able to dial a number.

Hi, I have recently discovered the project along with the PhoneJacks produced by quicknet, they could be the answer to something I have been looking into. I would like to be able to test using a dial-in server & possibily also a Windows RAS server, however I only have 1 phone line. I was thinking that I create a setup like that illustrated below to solve the problem:- Ext 1000

Hi, all. On a lark, I have gotten Asterisk 1.0.2 (from Debian testing) up and running, but I have found one problem when I try to use it with Free World Dialup: Dialing doesn't work properly. I have everything else working; it receives calls, ringing my phone and everything, but when I try to dial using the configs found on FWD's site for Asterisk at this URL:

My setup: X100P and Quicknet PhoneJack. I can't seem to properly set up a Zap channel for my X100P. Here are some of my configurations: [zaptel.conf] fxsks=1 #X100P fxoks=2 #Quicknet PhoneJack defaultzone=us loadzone=us [zapata.conf] [channels] context=local signalling=fxs_ks channel->1 ;X100P [extensions.conf] ... [local] exten=>_NXXNXXXXXX,1,Dial,Zap/1 ;I'm pretty sure the

Sorry, if this question has been asked before. I have redhat 9 and asterisk installed. I would like to know how can i make work the phonejack with asterisk.

I need help creating a channel for my phone device (Quicknet PhoneJack). I have installed and loaded the driver and phone devices listen in /dev (phone0 - phone15). [phone.conf] mode=dialtone format=slinear device => /dev/phone0 fxoks=2 ;Quicknet PhoneJack [extensions.conf] ... exten=>_NXXNXXXXXX,1,Dial,Phone/phone0 ... When I try to make a call, I get the following output: Executing

Hi. I've found a large bug in Speex Codec implementation in Openh323 code. I've signalled this bug in the Openh323 site, in the section "Report bugs". THE BUG NUMBER IS 143! Everybody can verify that the report is arrived monday 7 July!!!!! But no one has analyze this bug....!!!! So the result is: Openh323 implements Speex Codec that runs with wrong bit rates and that

Hi Friends, I am new to linux and new to asterisk. I need some help setting up asterisk in my linux box. Does anyone have a step by step guide ? On my PC i have installed a phonejack (from Quicknet) as well. Your help is appreciated.. I kind lost.. thanks, _________________________________________________________________ Expand your wine savvy — and get some great new recipes — at MSN Wine.

waited for the aroma of burnt electronics. There wasn't any so I went to the next room and plugged in a telephone on the wall outlet. I picked up the handset and it rang my asterisk box. I dont have any phone service. The phone is working fine and have used it for hours listening to podcasts. And I can plug it to any phone in the house. Now I am thinking if I can plug another phone

Hi, does anyone have the setup for go2call ? I have digium boards and quicknet linejacks and phonejacks. The cards work fine in asterisk without the g729 or g723.1 for the phonejack. I will like to do SIP origination using the codec in the phonejack and linejack g729 or g723 and send the calls to go2call. Anyone has the setup for this ? Or similar setup to a SIP provider using g729 or g723

Being very new to Asterisk, I'm not quite sure I know what I'm doing, and would appreciate some help. What I have so far: Quicknet PhoneJack card Asterisk Slackware 9.0 IAX protocol GSM libraries I have everything installed on my Slackware box (actually I have two of them and I want to set them up so that they can call each other) with an analog phone connected to the PhoneJack card.

Perhaps this will help... I have a phone connected to a QuickNet PhoneJack card. When I pick it up, I get a dial tone. When I dial a certain number of digits, the call is processed by Asterisk. The question: How does Asterisk determine how many numbers to let me dial? I'm banging my head against the desk here... _9XXXXXXX lets me make an outbound call, but _9X. only lets me dial 9 plus

First, here's what I want to do / what I have: X100P and a Quicknet PhoneJack. I want to be able to pick up the analog phone (connected to the phonejack) and dial another computer (with the same hardware) or just make a regular phone call which will be decided by asterisk depending on the phone number dialed. I know that this won't be taking full advantage of asterisk, but I'm

Greetings: We have been running a CVS HEAD version of asterisk from Mar 10, 2005 on ix86 (PIII-600) Linux 2.4.27 with ixj (chan_phone) hardware. In a hope of getting better 'chan_skinny' support (to attempt using a Cisco 7920 IP phone) I built asterisk 1.2.40 on this box. Initial tests verify that our previous dialplan is working (iax2 trunks, register sip phones, registering withour SER

I don't have any experience of your problem - but I thought this might help. http://www.hut.fi/Misc/Electronics/circuits/uk_wiring.html <http://www.hut.fi/Misc/Electronics/circuits/uk_wiring.html> The UK (and some of it's former colonies) use a system called 3-wire ringing. Some equipment from overseas requires an adaptor to make it work. I don't know if the LineJack is one

Hi all, this is a rather "newbie-oriented" question, so please bear with me... The system running Asterisk has been provided with an AVM FRITZ!Card PnP. SuSE Linux 9.0 recognizes it right after booting the system and it seems to be configured (MSN) correctly... The hwinfo looks like this: --- pbx:/etc/asterisk # hwinfo --isapnp 11: ISA(PnP) 01.0: 10300 ISDN Adapter [Created at