similar to: Sometimes pri channels restart during * is runnig ?

Hi all, inside my * is a E400P. The machine is a PII 400Mhz with 256MB Ram. OS is Debian woody. * is the newest cvs co. I have written a little callgen script which make outgoing calls through my *: #! /bin/sh set -e n=$1 # Nummer anz=$2 # Anzhal der Versuche anz2=$3 # Kan?le sle=$4 # Timeout bis zum n?chsten Versuch if [ -z $4 ]; then sle=0 fi s=1

Good day everyone, A Solution now exists for those of you still looking for the first model of Quad T1/E1 Interface Cards - the T400P and E400P. The T400P and E400P were manufactured by Digium until a few months ago, and were designed and released under the GNU Public License as the Tormenta II by Zapata Telephony. Varion, Inc. is now in full production manufacturing these boards. With the

On Sat, Jun 17, 2023 at 2:55 PM TTT <lists at telium.io> wrote: > Based on postings it should be possible to get the SIP Call-ID header > value from the ARI. At what point is this value available ? As well, how > do I retrieve that value – something like > > > > GET /channels/{channelId}/pjsip_header?key=Call-Id > > > > But that doesn’t work. >

Hey all, ? I'm trying to get an E400P and 2 X100Ps working together in the one box and don't seem to be having much luck. ? I can get the two different types of boards working separately, but not together.? I've made calls on both the X100P and have seen sync and correct signalling on the E400P.? But when I try to enable to configs together I get the following: ? modprobe wcfxo

Hi, I found E400P quad PRI card quite cheap (749USD): http://www.govarion.com/product_info.php?cPath=1&products_id=2&osCsid=68cdd6e3d08754 in comparison to te410p (approx 1500 USD ) http://www.digium.com/index.php?menu=product_detail&category=hardware&product=TE410P Now newer generation with HW echo canceling emerged (te411p). I'm not sure in what things those two cards

Hello all, I have some questions about the libpri and zap lib. I've sent mail to Mark for help. Also I wonder whether anyone else would be interested and helpful in them. I'm going to migrate a program to Wildcard E400P card. Our original program is based on C API similar to the functions provided in libpri.h and zap.h, so I want to use the E400P card in the following way: 1. install and

I've been going back and forth with my telco for several days, trying different configurations to get a new PRI to come up. The bchannels are all up and the T1 is not in alarm status. The dchannel refuses to come up however. We've tried ni2, qsig, and now dms100 for the switchtype. The telco tech I've been working with says that he's been sending "reset all channels"

Based on postings it should be possible to get the SIP Call-ID header value from the ARI. At what point is this value available ? As well, how do I retrieve that value - something like GET /channels/{channelId}/pjsip_header?key=Call-Id But that doesn't work. -------------- next part -------------- An HTML attachment was scrubbed... URL:

hi All, quit new to asterisk, can anybody tell me whether Wildcard E400P and Wildcard E100P support R2 CAS protocol. if they do, what is the value, i should set to 'signalling' parameter in the zapata.conf file? Surajee -------------- next part -------------- An HTML attachment was scrubbed... URL:

I tried GET /channels/{channelid}/variable?variable=CHANNEL(pjsip,call-id) But it responds with "message": "Channel not in Stasis application" Since I want to get the call-id for a channel not in stasis I guess that won’t work. Similarly, I can’t force the channel through my own code in the dialplan, so the PJSIP_HEADER function won’t work. So it looks like I’ll

Hi everybody. We have a problem with the configuration of the card, the cards work and we receive incoming calls but asterisk don't receive dnid. We have 5 servers with 1 E400P with the same problem and the telco told us that we need to configure the card to request it, how we can do this? Can you help me to solve the problem. Best regards, Carlos Fernández Puente carlos.fernandez@alisys.net

Hi, I'm looking into support for SS7 and I found an article (http://www.openss7.com/news13022002.html) which says that OpenSS7 supports Linux Support Inc's T400P-SS7 Quad T1 and E400P-SS7 Quad E1 PCI interface cards. It also says that Linux Support Inc is the primary sponsor of Asterisk. However I cannot find these cards on the Asterisk hardware page

Hi, Digium's E400P has RJ45 conector and my E1 link has BNC concetor. Could someone tell me the cable pinouts to make this conection? thanks Eduardo

A brandly new E400P 128 channel PRI, you can find more information on the Digium's site. The card was not used before, I sell it cause our company just don't need, we use Cisco AS5300. I can offer you the PCI PRI at $940 if bought in the next 2 days, I can send it to you via FedEx or DHL express. Please email me for more details! Regards, Kalin ----------------------------- IPPN Networks

Hi friends, I'm testing a E400P with PRI signaling. When I start asterisk (-vvc), i get the fowlling messages in /var/log/asterisk/message: May 12 12:42:06 WARNING[1024]: File chan_iax2.c, Line 4931 (set_config): Ignoring port for now May 12 12:42:06 WARNING[1024]: File chan_zap.c, Line 6525 (load_module): Ignoring ocancel And 'show channels' returns no channels. Can anyone help

We've changed E1 providers and I'm trying to reconfigure an E400P to make it work with the new lines. They're supposedly "standard" EuroISDN lines (in the UK). I'm initially just trying to get a single line up. I have the following in /etc/zaptel.conf: span=1,0,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 loadzone=uk defaultzone=uk The LED on the back

Hi! I have the chance to play with a couple of E400P cards, each installed in a IBM e330 XSeries servers (2 x 1GHz P-III CPU 2 Gb RAM, 36Gb SCSI HDD with RH8.0 2.4.18-smp kernel), and I'm trying to test/benchmark this e330/E400P combo generating calls thru /var/spool/asterisk/outgoing One e400P if doing the carrier work making calls and the other just receives the calls: Server#1

Hi, I came back from a quiet weekend today and found my E400P box to have gone astray. Asterisk is loaded from inittab, and started crashing and reloading a couple of thousands of times, each time notifying my monitoring service :-P I remember there would be issues on old cvs stuff since the crash at digium so I made a clean checkout just now. Here is what happens when I load manually:

Since i'm sure there are others out there in the same position as me, being disappointed that the original T400P and E400P cards are no longer available from Digium, I thought I would pass on a place I found to get them. I needed the older card, since I didn't want to have to get a motherboard with 3.3v pci slots on it.

Hi List, Now I will send to you more specific what I am trying to do. I have one Asterisk Channel where receives Midia Frames in the codecs format: Speex UltraWideBand and Speex NarrowBand. When I use Speex NarrowBand the Asterisk is able to convert this frame to G711. But when I use Speex UltraWideBand the Asterisk don't convert it. Then I need in my Asterisk Channel Source include the Speex