similar to: VIA vs Intel

Hello Before I order a Travla C156 case (http://206.14.132.88/products/Travla/c156/C156.html), a Via mini-ITX motherboard (either the fanless ME6000 http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=4 or the fan-equipped M10000 http://idotpc.com/TheStore/pc/viewPrd.asp?idcategory=50&idproduct=163 ) , and a PCI FXO card from Digium or OpenVox... has someone already

I'm thinking of placing Asterisk on an itx motherboard in a tiny case. The ITX motherboards top out around 400Mhz PII (in terms of power relative to a desktop). How much CPU would I need for an office of 50 people? How much disk storage for voicemail + OS? (typical / average) The system will have no PCI cards (no Digium FSO/FXO cards) - everything over the LAN connection. Thanks,

Hi All! Can anyone direct me to any websites / manufacturers out there who are making small, put-it-in-the-closet-and-forget-it type systems for building routers, home gateway servers, that sort of thing? My fantasy machine for this purpose would be along the lines of a mini-itx system with external power supply, dual Ethernet interfaces on board, and one PCI slot available. If it had one

Cool, i'll help out a bit with the windows port, i will start right away with a new project on asteriskguru making nightly executable builds and installers - will post the links in -users when i'm done. Well done luigi, this will make it a lot easier for a lot of non linux guys to make their first steps in the asterisk world Crossposted to -users. Zoa Luigi Rizzo wrote: > As a

I'm trying to boot linux on a VIA EPIA-M board (a Nehemiah-based M10000), and I'm having some trouble with it. I'm watching the network transactions with ethereal, and I'm seeing a failure at what appears to be the tftp stage. The M10000 picks up its IP address from the dhcp server (ISC DHCP3), and reports it correctly on the screen. Then the tftp session starts, and I get the

Anyone using asterisk with VoicePlus ? Looking for a new provider and wanted to get a little feedback

I've seen the embedded posts. Is anyone running Asterisk on the MINI ITX? James Taylor MetroTel 3505 Summerhill Road Suite 11 Texarkana, Tx 75503 903-793-1956

Is it possible to read fortran binaries with R? I tried unsucessfully and my understanding is that fortran write binaries with leading and trailing bytes. I get numbers but not the right ones. Thanks ps: the binary I'm interested in reading is a MODFLOW output with a mix of character, double and integers. [[alternative HTML version deleted]]

Is there anyone who has successfully put together a "high-powered" mini-itx ZFS box that would be willing to post their system specs? I''m eyeballing the KI690-AM2... http://www.albatron.com.tw/english/product/mb/pro_detail.asp?rlink=Overview&no=239 ...but am having a difficult time locating it and a suitable case currently. I was in negotiations with a hardware source,

Hello I am trying to extract AICs from an ARIMA estimation with different combinations of p & q ( p =0,1,2,3 and q=0,1.2,3). I have tried using the following code unsucessfully. Can anyone help? code: storage1 <- numeric(16) for (p in 0:3){ ? ? for (q in 0:3){ ? ? ? storage1[p]? <- arima(x,order=c(p,0,q), method="ML")} } storage1$aic [[alternative HTML version deleted]]

Hi, I was wondering if anyone had a good dhcpd.conf and /tftpboot files for a EPIA-M motherboard with RedHat 9.0.... Or maybe just a configuration that works with the EPIA-M (doesn't matter which type of linux). I'm trying to boot the system from the network and it seems to be getting to downloading pxelinux.0 but then nothing happens after that.... I'm using ISC dhcpd V3.0pl2,

Hey, The recent discussion on NAS/SAN and the Thecus N8800 got me to thinking. Bit of background. I have an old Dual Athlon MP2800+ that I'm using for a home web/file server. It runs fine but between the noise of the various fans and it's location in the living room, I've been asked by my spouse to find a replacement for it that's smaller & quieter. Looking at the Thecus, and

Hi List, I am trying unsucessfully to modify the fontsize of lables in mosaic: require(vcd) mosaic(Titanic, pop=FALSE, labeling_args=list(rot_labels=c(bottom=90,top=90), set_varnames = c(Sex = "Gender"), gp_text=gpar(fontsize=20))) #can't get it to resize text tab <- ifelse(Titanic < 6, NA, Titanic) # it works for labeling_cells labeling_cells(text = tab,

I have a TDM400p with 3 fxs and 1 fxo daughter cards. It's in a mini-itx case with a 'right-angle' PCI riser card so the TDM400p is 'sandwiched' between the Atom D525 CPU and the 2.5" hard drive. I'm getting a bunch of clicks and pops on all ports. Has anybody had a similar experience? Did you find a solution? -- Thanks in advance,

Hi All, I've bought a R2Adapter to convert R2Digital to ISDN. I am trying to config E100P card but D-Channel is down. I know R2Adapter uses ETSI ISDN Protocol so I tried unsucessfully setup switchtype to EuroISDN. Any clue? Daniel

Hello everyone, Does anyone out there have actual experience with running * on a mini-itx board from VIA? They look good, but I have some reserves because of VIA's problems with PCI latency in recent years (audio dropouts, wierd things happening). I am looking at the EPIA CL-10000. For $270, I can get a CL-10000 (1ghz C3, dual ethernets, etc), 256mb RAM, and a nice small (12 x 2 x 11)

-------------- next part -------------- An embedded message was scrubbed... From: Steve Rodgers <hwstar at rodgers.sdcoxmail.com> Subject: Via Mini-itx anaconda install failure Date: Sat, 1 May 2004 14:31:43 -0700 Size: 849 URL: <http://lists.centos.org/pipermail/centos/attachments/20040501/e69b2948/attachment-0005.mht>

Hi, Did anyone try to install Asterisk on the Mini-Box M300 with a Versa mini-ITX board 1GHz VIA x86 CPU? The box looks promissing, but I am not sure if Digium cards are compatible with the mother board (Versa mini-ITX) Also I am not sure if the 1GHz VIA processor can handle a Digium 24 port analog board, or an E1 digital board. If anyone had tried the Mini-Box, the processor, of the mother

I am looking into convising the boss to get me a mini-itx system to replace my workhorse notebook (I have to have a corp notebook and I can remote terminal into a Centos server from it). So I have been playing with one mini-itx system (the decTOP) and am looking at my options. I want a fast processor, 1Gb memory, LAN, 4USB, VGA. Wireless and bluetooth optional USB dongles along with a

Hi Everyone, I'd be grateful if anyone can help with a couple of queries I have. Recently I downloaded Centos 3.3 and cannot get it to install I my system. The system I am using to install is a based on an original EPIA Mini-ITX m/board. At a certain point in installing it comes up with an error saying something like "system not supported". Can anyone advise if they have got