similar to: Call transfert with dial plan

Hello, I am building an asterisk PBX with some stuff to make a usable VOIP / PSTN Gateway. I use the following devices: SIP Phones from GrandStream for VOIP side OpenLine4 from voicetronix for PSTN Side I am building things step by step with some priorities. I have now a working system able to place and receive calls from/to pstn. Before attempting to bring other functions (like voice

well .. good news :) i've just put in txgain=1.0 rxgain=1.0 in my zapata.conf and upgraded the Grandstream Budgettones i'm using to version 81 of the software and all seems fine .. there is still an echo but after the first couple of seconds of call it vanishes, as the echocancelling kicks in .. so far my client is happy :) now .. i have one slight problem left .. although most of my

Hello, I can't have asterisk working without echo when I place a call from IP phone (SIP or H323) to a PSTN Phone. The called number as no problem with echo but there is a very audible echo in the SIP phone. This situation occurs either when connected with ISDN card thru i4linux driver and with my openline card from voicetronix. Do you have any suggestion fo that? Regards, Daniel ANDRE

I have just started to play with callgroups and pickupgroups.. I updates my * from CVS this morning (about 15 mins ago).. I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf.. I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB.. Have I not configured

Hello, Sorry for posting again my question about MGCP Phone and Asterisk But I can't use it. I'd like to know weather it is a pb of my confiuration (mgcp.conf), My IP Phone device or asterisk. I include my mgcp.conf file and may send some debug trace. Thank you for any feedback. Best regards, Daniel ANDRE ; ; MGCP Configuration for Asterisk ; [general] ;port = 2427 ;bindaddr =

Hello all, I wonder to have some feedback on using ISDN BRI Cards with Asterisk and the Echo problem. I have tried a simple BRI card with i4l driver and encounter huge echo problem. I have tried to solve it with a Sw chocanceller without success. What I'd like to know is wether some of you have used other BRI Cards (I have seen reference to Eicon cards on this list) and if the echo

Hello, Now that I have a nearly working configuration for my IP10S with * I wonder if anyone has done call transfert with this Phone. In the IP10S documentation they talk about the 'service key' wich is the key with the white dot on it. With this Key, it should be possible to have a menu with call transfert entries. This menu should (accordingly to the documentation) depend on the

Hello, I would like to have some comparison between E1 cards from Digium and those from Eicon for a VOIP - ISDN Gateway. How does they compare on the echo cancel point of view? Is the echocancellation code for E400 good enough for production environment? Best regards, Daniel -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz -

Hello, I have just received an MGCP Phone for test purpose and I can't place a call from my MGCP Phone. I can call my MGCP phone from a SIP Phone. Here is my mgcp.conf: ; ; MGCP Configuration for Asterisk ; [general] ;port = 2427 ;bindaddr = 0.0.0.0 ;[dlinkgw] ;host = 192.168.0.64 ;context = default ;line => aaln/2 ;line => aaln/1 [192.168.10.10] host = 192.168.10.10 context =

I have a SwissVoice IP10S but can not seem to get it to have dialtone or dial on *. Calls to or from 3001 don't work. Any ideas are appreciated. Robert mgcp.conf is: [general] port = 2427 bindaddr = 192.168.0.110 [ip10] host = 192.168.0.5 context = from-sip line => aaln/1 The portion of extensions.conf is: exten => 3001,1,Dial(MGCP/aaln1,20) exten => 3001,103,Hangup

Hello, I have an issue getting the chan_capi module to load in asterisk cvs from today. Plain 2.4.20 kernel with melware patches for the Eicon Diva Server Bri card. I load the modules with: modprobe -v divas divacapi I load the firmware with: divactrl load -c 1 -f ETSI -vd6 Output in /var/log/messages is: Nov 9 19:26:26 voice kernel: Eicon DIVA - DIDD table (http://www.melware.net) Nov 9

Hello, I would like to know if voicetronix card (specially openswitch6 and 12) can be used with asterisk. Is there any driver for this card? Best regards, Daniel -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com

Hello, I have just received an MGCP Phone for test purpose and I can't place a call from my MGCP Phone. I can call my MGCP phone from a SIP Phone. Here is my mgcp.conf: ; ; MGCP Configuration for Asterisk ; [general] ;port = 2427 ;bindaddr = 0.0.0.0 ;[dlinkgw] ;host = 192.168.0.64 ;context = default ;line => aaln/2 ;line => aaln/1 [192.168.10.10] host = 192.168.10.10 context =

Hello, Dos anybody use these card with asterisk? If so I'd like to have some tips on how to configure them. Regards, Daniel ANDRE -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com

Hi, A question about transfert. How can I make transfert with the the person who call. X call Z and X transfert Z to Y. I only succeed to do X call Z and Z transfert to Y. If someone have a solution it will be very good =) regards Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, 1) I am using rsync with gentoo and all emerge are very fast 400 kb/s ADSL connections. When I am using rsync with two computers with the same bandwith connection (ADSL 400 kb/s) transfert is very low (40 kb/s). options are "rsync -avzub". How can I improve the rate of transfert ? I saw That it use sftp. Is there a configuration file for sftp that improve the transfert ? 2) How

Hi there, I have serious problems with MGCP and Swissvoice ip10s, and it appears that recent CVS also introduced trouble for other MGCP users. Please check and add comments in the bugtracker so that we can get a clearer picture - thanks! Also comment if things are working fine for you. http://bugs.digium.com/bug_view_page.php?bug_id=0001542

Hi, I try to use Libiax in order to put un transfert button in my iax softphone. Is there a way to make a call transfert ? Best regards rattana -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031210/e1e6acf3/attachment.htm

hi i would lke implement attended transfert (or consultative transfer) on asterisk server, but i don't find doc about this. Could you help me with some doc about attended transfert? thanks

2016-08-04 17:49 GMT+04:00 Rowland Penny <rpenny at samba.org>: > On Thu, 4 Aug 2016 16:44:34 +0400 > henri transfert <hb.transfert at gmail.com> wrote: > > > Hi, > > > > On RSAT , we can see that there are some extra fields for users > > account like description, office, phone number or email address. > > > > I already have hundreds of