similar to: Kernel 2.6.9 hangs

All, I am running xen3.0.2 on CentOS4.2, and get this error when trying to boot Xen kernel(domain0) ...... Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not syncing: Attempting to kill init! >Then system reboot.In grub.conf,I have changed

All, I am running xen3.0.2 and xen unstable on RHEL 4, and get this error when trying to boot Xen kernel(domain0) ...... Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not syncing: Attempting to kill init! Then system reboot.In grub.conf,I have

All, I am running xen3.0.2 and xen unstable on RHEL 4, and get this error when trying to boot Xen kernel(domain0) ...... Creating root device Mounting root filesystem mount: error 6 mounting ext3 mount: error 2 mounting none Switching to new root switchroot: mount failed: 22 umount /initrd/dev failed: 2 Kernel panic - not syncing: Attempting to kill init! Then system reboot.In grub.conf,I have

Hello Dear everybody! I just installed CentOS 5.3 and try the built-in Xen 3.1 with it. But even the typical ttyLinux doesn''t work when the domain is created.-- it just doesn''t give me the login prompt while the domain ttylinux is booted. [root@soe-hd513-pc102 nimbus]# xm create ttylinux-xen.conf -c Using config file "./ttylinux-xen.conf". Started domain ttylinux

hi , all . The command ''xend start'' can be ran successfully. There was some trouble with the command ''xm create -c a.cfg'' when I intended to create a guest os. The part of log is following: >>TCP established hash table entries: 262144 (order: 10, 4194304 bytes) >>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >>TCP: Hash

Trying to get Xen working with Gluster. I understand you need --disable-direct-io-mode, however that cuts my disk I/O from 130 MB/s to only 22 MB/s. Also when I try to use xen with tap:aio, but only get to Creating root device. Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating

In CentOS 4.1/2, what package contains this library: libstdc++-libc6.2-2.so.3? I installed a couple of the compat- packages, but this library is still missing.

I am hoping I can get a little light she on a problem I am having trying to bring up a guest domain. I suspect that the problem is in my supplied file system First the environment. VT enabled dual core EM64T processor, Asus Mb (I can get the exact chipset infor if relevant) 2 Gig of DRAM SATA drives. I have build and booted the domain 0 using 3.0.2-2 version of xen. This seems ok.

Hi folks, After using 3.0.3 at work for awhile I decided to upgrade my 3.0.2 install at home to 3.0.3; however, I ran into issues with my IDE disk not being discovered. The full log can be seen here: http://www.techmonkeys.org/xen.txt I think this is the part most people will care about: Red Hat nash version 4.2.1.8 starting Mounted /proc filesystem Mounting sysfs Creating /dev Starting udev

I read that XFS has problems with 4K Stack size for Linux on 32-bit systems. How did we address this in the centosplus kernel? Since what release of CentOS was this problem resolved? Is there a quick way to know what size the Linux stack is configured to be in a system's that's running? Thanks for your help. -------------- next part -------------- An HTML attachment was scrubbed...

I have created a custom kernel as I needed to add floating point emulation to the kernel. I used the command below to create my initrd: mkinitrd --preload=ohci-hcd --preload=uhci-hcd --preload=ehci-hcd --preload=ext3 --preload=jbd --preload=scsi_mod --preload=sd_mod --preload=ata_piix --preload=libata /boot/initrd-2.6.9-67.ELmsgnet.img 2.6.9-67.ELmsgnet When I copy my vmlinuz and initrd to

can xen-3.0.2 run in fedora core 3? I tried to install xen-3.0.2 to fedora core 3 (with 2.6.16 kernel), I install it in the following steps: make world make install ./install.sh mkinitrd -v -f initrd-2.6.16-xen.img 2.6.16-xen and I configure grub as follows: title xen 3.0.2 root (hd0,0) kernel /boot/xen-3.0.gz dom0_men=262144 module /boot/vmlinuz-2.6.16-xen root=/dev/sda1 ro

Is there a way to determine what package changed from CentOS 4.1 to 4.2 (or between any two versions)? I need to create a yum repository to upgrade some machines that cannot talk to the Internet. Thanks for any help. ID:FONGVANG

I'm getting a couple of systems that are arriving with the new 3ware 9550sx controller. Does anyone know when this will be natively supported by CentOS? Has anyone built an RPM of the driver/module for this new controller?

I downloaded the src rpm for CentOS 5 and tried to recompile it. It failed with the following message: + sh ./scripts/modsign/modsign.sh /var/tmp/kernel-2.6.18-8.el5-root /lib/modules/2.6.18-8.el5PAE/kernel/drivers/char/watchdog/pcwd_pci.ko CentOS gpg: WARNING: unsafe permissions on homedir `..' + mv -f

I have a total of 20 CentOS 4.1 systems running on fairly new hardware. About 6 of them are experiencing strange hangs without any indication -- nothing in /var/log/messages nor on the console -- sometime within 10-30 minutes after a reboot. The systems still responds to ping but you can't ssh to it. At the console, you could type "root" at the user prompt but it hangs immediately

My manual patching of the rejects in checkpoint.c didn''t work out; a delete of 10,000 files caused a panic (in any ext fs, not just Lustre). In the new checkpoint.c, two routines expected by the patch no longer exist: __cleanup_transaction and __flush_buffer. I can avoid the panic if I omit (don''t try to manually patch) the following: Index: linux-2.6.9/fs/jbd/checkpoint.c

I had a supermicro server SuperServer 1027R-WRF4+ and a old Dell PowerEdge 2950. In both machines I setup centos 6.5, which is running 3.10.34-11.el6.centos.alt.x86_64. I follow Xen4Cen wiki to setup Xen, I had other servers running Centos 5.x without issues. Now, once I build my vm's dom-u centos 6.5/centos 5.9 both x64, I receive different erros, let me show u the message I receive in my

Quite simply, HOW? :) I have the pxeboot initrd.img from the RH 3.0 AS CD's. We need to put a new cciss.o driver from HP into this initrd.img. Unforunately, the modules in the pxeboot initrd.img we have are 2.4.21-4 and our new driver is compiled for 2.4.21-15, so we have to upgrade everything. I downloaded the kernel-BOOT-2.4.21-15 RPM and installed that, so I have all those drivers. My

I am having an issue getting a DomU to boot properly. There is never any indication of a stop error or kernel panic, it simply hangs after "Starting crond [ OK ]" and never continues. I''ve included my mkinitrd and output from xm create... please help! ##### XENBUS errors ##### XENBUS: Device with no driver: device/vbd/2049 XENBUS: Device with no driver: device/vbd/2050