similar to: Follow Me

I'm testing out my SNOM 200 phone by trying to call out through NuFone. When I do so, I don't hear an echo at all (in fact I can't hear myself through the phone) but the callee can hear an echo when she speaks. NuFone tells me their network is totally digital and so can't be involved in an echo. This is all well and good, but the echo is still there. Any suggestions? As a

I'm looking for a source for 50-pin amphenol cables, the ones used to connect Adtran's to punch down blocks. Preferably, one that's mail order and takes orders over the internet. Thanks.

We are trying to implement "area-code dialing" in our asterisk PBX. Basically: we will have a number of customers, who may be in different area codes, that want to direct-dial each other's extensions. We want this to work like a "real" centrex, in that seven-digit numbers should try (1) "local" VoIP extensions, and then (2) "local" PSTN numbers.

I am having some oddness with the 11/11/2003 CVS of *. Specifically, outgoing audio to NuFone doesn't seem to be transmitted (I can hear the other side just fine). My firewall is set to allow all outgoing traffic, and the IAX2 connection is definitely established correctly. Also, I can watch UDP traffic going by on the firewall so I know that * is transmitting. This happens with X-Ten on

In response to the postings by Andrew Kohlsmith and Ernest W. Lessenger: Andrew, I modified the exten line in extensions.conf as you suggested. Unfortunately, It still does not work... Ernest, I spent approx. 4 hours reading list archives (and anything else Google served up) on how to configure iax.conf and extensions.conf to work with Voicepulse. Then, I sent an email to voicepulse

Hi all, While pondering my choices for local dial tone service via a bunch of POTS lines or a T1, I began to wonder if perhaps there is another way. Are there VoIP dialtone providers? That is, could I use only my internet connection for voice calls and not have a separate T1/POTS bank for that? I guess I am imagining a company that gateways between the PTSN and the internet backbone.

Can anyone tell me the features of the Cisco 7905 with SIP? I mean things like number of lines, speakerphone, transfer buttons, etc. I've seen the Cisco material, but all it told me was how nifty it is and how wonderful the XML interface will be ;) Thanks, --Ernest

Is anyone on the list using an Audiocodes gateway with asterisk and SIP? I'm looking at that platform, but I have a couple of issues: 1) Echo cancellation. The echo that I'm hearing with an X100P is unacceptable. Does the Audiocodes do better? 2) Line signalling. I'm using Kewlstart with the X100P, but it looks like the audiocodes uses loopstart only. How does this work with

I'm using the SNOM 200 latest SIP beta (so that I can have the GSM codec, etc). Everything seems to be working fine, but the music on hold doesn't play when I use the HOLD button on the snom. Any suggestions? Thanks, --Ernest

Is it possible to limit the number of "lines" provided by a given SIP/IAX connection? For example: I want to limit SIP extensions to only a single incoming line, even the phone itself can handle three. Or, I might want to prevent extensions from making more than one outgoing call at a time. Or, I might want to protect my bandwidth/call quality by limiting outgoing calls through

How are people handling call transfer with SNOM phones? We are okay with the "#" transfer workaround, but I worry about how that will work with other systems that expect me to be able to "press # to return to the previous menu" or similar. Thanks, --Ernest

Hey all, For those of you who are really worried about asterisk performance, I thought I might alert you to a "toy" you might play around with. The Intel Performance Primitives contain a number of optimized functions for use in digital signal processing that could help with echo cancellation, codec transformations, etc. I don't have any idea how useful this would be in Real

I am having a problem with your my nufone service. I'm trying to setup incoming calls and I'm having no success. Outgoing works fine though. The message I'm getting is "the person you are call is not currently reachable". I'm going to give you as much info as I can. I'm also an asterisk newb! Anyways, I installed asterisk@home. Set up extensions which communicate

Hello, I am trying to configure the my asterisk box here with the following **iax.conf*** [NuFone] type=peer host=switch-1.nufone.net secret=xxxxxx ***extensions.conf:*** exten => _1NXXNXXXXXX,1,Dial,IAX2/xxxxxxx@NuFone/${EXTEN} exten => _011N.,1,Dial,IAX2/xxxxxx@NuFone/${EXTEN} I have a couple of Xlite softphones and 2 analogue phones connected to a mediatrix 1102 connected to our lan.

Could someone explain to me the proper return values for ast_filerename and ast_filecopy? I'm trying to write an application to utilize these functions, but the return values seem wonky. Specifically, I can't tell whether success will always return 0 and failure will always return !0. Thanks, --Ernest

I would like to create a simple menu that would allow a caller to decide whether they want to leave a message or be forwarded to another number (i.e cell phone). Thanks in advance for any insight. Here's my current extension.conf [general] static=yes writeprotect=yes [globals] [default] exten => 101,1,Dial(SIP/101,20) exten => 101,n,Voicemail(101 at default) ;This automatically

Hello, I've signed up for a NuFone account, and added the following instructions to my config files per NufFones directinos: iax.conf [NuFone] type=peer host=switch-1.nufone.net secret=password extensions.conf (under the [default] context) exten => _1NXXNXXXXXX,1,Dial,IAX2/f00b3r@NuFone/${EXTEN} I then get this message in the CLI: -- Executing Dial("SIP/jake-fe5d",

Hi all! I updated my snom200 to 2.02t and now MOH from * don?t works anymore... only the MOH from snom server and if i clear the MOH server field in the phone i have no MOH at all..( with the transfer button, moh plays using a extension). Someone with that problem? I downgrade to 2.01s but nothing changes. Miklos -------------- next part -------------- An HTML attachment was scrubbed... URL:

-----Original Message----- <snip> Is this possible with asterisk? Anyone have a sample dialplan? -other than the problem outlined below I would try something like S,1,wait(20) S,2,voicemail(uwhatever) S,3,hangup That should ignore the call for 20 seconds and then leave a message in the unavailable greeting for 'whatever' then hangup That leaves another problem -

These allow and disallow work with NuFone for me disallow=all allow=ulaw allow=alaw allow=gsm Jeff Message: 11 Date: Fri, 11 Mar 2005 11:15:51 +0100 From: "Edward Banfa" <edward@radform.com> Subject: [Asterisk-Users] NuFone Configuration [problem] To: "'Asterisk Users Mailing List - Non-Commercial Discussion'" <asterisk-users@lists.digium.com>