similar to: Installation Configuration Questions

Hi! Is there anyone that are using a E1-channelbank and have any tips about some type? Im looking at the TE410P and use one port for a PRI (Euro-ISDN, I think we're using some slightly modified version here in Sweden, but I'll check that tomorrow) and connect one port to a channelbank for 30 analogue telephones. It would also be great to get callerid on the analogue phones, so it would

Sure would like to hear experiences using various FXO to VoIP gateways with *. It seems that any thread that has anything to do with problematic FXO interfaces goes on forever with speculation about everything under the sun. Unless there is someone out there with the engineering experience to build a better one it is a waste of time, let Digium deal with it. If the TDM400P can ever be made 99.99%

Do they fall under FCC certification if they're built to the same specifications as the ones from Digium? If I build my own T100Ps from the schematics and board layouts that are available, are they legal to plug into the PSTN?

If you have used * to support a pri as pri_net (as opposed to pri_cpe), either to talk to another * system or a PBX of some sort, I would be very interested in hearing about your experiences. Imparticular, I would like to know that it works before I invest in the extra hardware. TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 284-5800 ext 115

OK, I think I'm ready for the next step from the X100P. Splitting a T1 with a T100P and a channel bank/s ~ 50 extensions. I think the existing system uses NEC phones for ~34 extensions, I don't know the specific model yet of the phones or the channel bank. If the channel bank is not compatible with Asterisk/digium what brand should I be looking at to interface best with Asterisk and

I am having a problem with asterisk not being stable enough for production use. I have two cards, the digium TE406P, and the TE410P. The TE410P is the primary card that I am using but I would like to move to the TE406P for the echo cancellation and more flexibility of PCI slots available. General config info: 3 PRIs, configured as such: span=1,2,0,esf,b8zs span=2,0,0,esf,b8zs

Group Can I have 2 wildcard T1 cards in the same box? I was thinking the first card would have channels 1-24 and the second card would have 25-48 Does this sound correct?

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 8351 bytes Desc: image001.gif Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050601/65fd0455/attachment.gif

Does anyone know if the E1 cards that digium sells work in India. Also are there any distributers for those cards in India. By E1 cards I mean E100P, TE410P or TE405P -- regards Vikram (http://www.vicramresearch.com)

Hi all, I've got a TE410p connected via T1 to four channel banks (2 FXO and 2 FXS), no PRIs. Some users are complaining that they hear clicks and pops on the FXS lines, generally when they pick up the phone it's noisy. This happens only after a while, e.g. after a fresh restart of everything, all is fine but after some time these noises start appearing. From what I've read on the

Hi All, I'm looking for a good voip hardphone that has a decent set of the "regular" features (conference, 2 lines, etc) thats reliable, has decent quality, and isn't too pricey. Does anyone have any suggestions? Thanks in advance. Derek -- Derek Fedel

I'm looking to install a system with 80 FXS analog phones. At this time the only cost effective solution is using a 4 port T1 card and addit 600 channel bank. Has anyone tried this solution? any good documents beside http://www.voip-info.org/wiki/index.php?page=Asterisk+hardware+channel+bank+check as far as i know, addit 600 T1 interface is not PRI (please correct me if i'm wrong) its CAS

Not sure if anybody noticed, but it seems like Skype For Asterisk is out. $66 per channels, pretty pricey http://store.digium.com/productview.php?product_code=1SFA0001 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090817/cd8c6546/attachment.htm

Hello Everyone, What kind of hardware setup would I need to do if I want a T1 connection to PSTN and have 48 users in office with analog phones. Will something work if I have a T410P card in asterisk and have one T1 going to PSTN and other two to a channel bank. I would then connect the 48 phones (FXS) to the channel bank! Thanks. Deepak

Need to buy 2-3 channel banks for some asterisk deployments...

Using a TE410P with Zhone 24FXS channel banks to power standard analog phones I can't seem to find out if it's possible to support FSK or voltage type message waiting lamps. I don't want to use stutter dial tone because of the dramatic difference in per phone cost. TIA

hi guys, do you have any suggestions on how to connect 2 TE410P via E1? (for simulation and testing purposes) asterisk1 --> TE410P ----> ? ---------> ? ---->TE410P -->asterisk2 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030907/698cd499/attachment.htm

Hi all. First thing: I want to thank you all for your help over the past month as I've been learning asterisk. This is one of the more helpful lists. Even when I ask questions that have answers in the wiki ( which I missed because I've been over studying ). Second thing is this: My office is scouting out VoIP solutions, and I have suggested an asterisk solution. We will be

List, I have a TE410P (T1 mode, all PRI) and a T100P (fxoks, for fxs channel bank). I cannot seem to get the T100P to send any clock to the channel bank. I prefer that it use the same clock source as the TE410P, but it doesn't matter if it's not in sync just as long as it's there. The TE410P is configured 3x pri_cpe, 1x pri_net. The three cpe go to XO Sonus switch, the net to

Hello, I'm planning to convert my phone system to Asterisk, as I've outgrown my TalkSwitch system. I have a few questions for experienced * users, most of which can be answered yes/no. Current Setup: - Talkswitch 48NLS (4CO/8Ext) phone system. - One CO line, two Vonage lines, one Voicepulse line connected to phone system - A third Vonage line directly connected to a fax machine - A